75/W/EDC-I/SRE/2024-25

Amount

Detail of Work

Safety cartage of SP 55 Poles from ESC, SRE/J.E. Store to the site of work at various sites including loading & unloading at both ends (Distance 0 to 50 K.M.)

Safety cartage of other lines material (Except Poles) from ESC, SRE/J.E. Store to the site of work at various sites including loading & unloading at both ends (Distance 0 to 50 K.M.)

Providing of holding clamp/with nuts bolts made of new MS flat iron 50x6 mm on SP 55 poles.

Digging of trench 1.5 mtr. deep and laying of 2 no parallel no. HDPE pipe 4 inch dia on 1 mtr. distance.

Providing of Stay clamp / with nuts bolts made of new MS flat iron 50x6 mm on SP 55 poles.

Providing of HDPE Pipe 120mm dia.

Erection of single support on SP55 Poles with complete fitting of all accessories of HT line.

Pole of Grouting .

Laying, lifting, stringing, sagging jump ring & binding of ACSR Rabit conductor for HT Line.

Providing of Red oxide paints.

Providing of Aluminum Paints .

Painting of ST poles 11 Mtr, SP-55 with Red Oxide paint as well as cleaning of surface as required for proper completion of work. and remaining by Aluminium paint etc.

Earthing of pole by earthing rod

Safety cartage of 11 kv XLPE Cable 3x185 from ESC, SRE/J.E. Store to the site of work at various sites including loading & unloading at both ends (Distance 0 to 50 K.M.)

Fabrication charge of Angle.

Laying of 11 KV XLPE cable 3X185sq mm in the HDPE pipe 120 mm dia

Making of 11 KV XLPE Heat shrinkable od/ indoor jointing kits.

Removal of old & damaged ACSR conductor from the existing poles with making bundle & shifting the same from site to JE store / ESC, SRE including loading & unloading at both ends.

Dismantling of pole.

Safety cartage of Dismantling pole from Site to ESC, SRE/J.E. Store including loading & unloading at both ends (Distance 0 to 50 K.M.)

Fabrication and Erection of D/P on SP55 8.5 Mtr. Long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per RESPO specification.

Providing and fixing of Nut & Bolt.

Grouting of stay rods by digging of pits in block 600x600x300 MM & cement concreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire.

M/s Ayushi Enterprises (BID ID -4872658)

FAGGU RAM & COMPANY (BID ID -4872676)