REPAIR MAINTANANCE/REPLACEMENT OF INTERNAL ELECTRIFICATION FITTINGS AND FIXERS AND OTHER CANNECTED ITEMS FOR MARRIED OTM ACCN TECH AREA AT AF STATION OJHAR

Amount

Disconnect and insulate electric supply wire and taking down carefully ceilling/ exhaust/cabin/wall fan of any make and sweep dismantlling blades, check for repairs required ( Note: Repairs/ Replacement of spares shall be carreied under appropriate items. for C/fan, Exhaust fan & Geysers repairs. The item will be taken down and brought to MES yard for repairs, i.e overoiling,rewinding,replacement of bush/bearing, brazing/machine work, painting and after testing at MES store yard Cost for transportation from site to MES store yard & vice versa is deemeed to be included under the rate.

Hanging/fixing only ceiling fans of any make and sweep connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed 0.5 Sqmm from ceiling rose to fan connector and testing as directed and specified( Note: The fan shall be fitted with new set of clamps, rubber shackle split pins and top and bottom nut bolts etc.)

Hanging/fixing only exhaust/cabin/wall fan of any make or sweep connecting up complete with and including provision of copper conductor cord 3 core PVC insulated and sheathed from celing rose to fan connector & testing as directed and specified. ( Note: The fan shall be fitted with new set of washers, nuts, rubber packing etc.)

M & L for Opening up of fan, motor of fan, cleaning stator,rotor, cleaning of all parts greasing oiling of bushes and bearing reassembling and testing for smooth functioning for celling fan 1200 mm sweep Note;-rate shall be quoted for taking down & refixing of ceiling fn afterrepair work

All as per item No 4 but for Exhaust fan 300/375/450mm sweep

All as per item No 4 but for wall/cabin fan 400 mm sweep

All as per item No 4 but for Table/pedastal fan 400 /600/750 mm sweep

M & L for removing the burnt winding and rewinding the fan with super enamelled copper winding wire of suitable gauge, insulating, putting sleeves etc complete all as specified and directed by Engineer-in-Charge for celing fan 1200 mm sweep

All as per item No 8 but for Exhaust fan 300mm sweep

All as per item No 8 but for Exhaust fan 450 mm sweep

All as per item No 8 but for wall/cabin fan 400/450 mm sweep

All as per item No 8 but for Pedastal fan 400/600/750 mm sweep

Supply only bearing in repairs or replacement for celing fan 1200 mm sweep

All as per item No 13 but for Exhaust fan 300mm sweep

All as per item No 13 but for Exhaus/wall/cabin fan 450 mm sweep

All as per item No 13 but for Pedastal fan 400/600/750 mm sweep

Supply only gun metal bush in repairs or replacement forceling fan 1200 mm sweep

All as per item No 17 but for Exhaust fan of any type

All as per item No 17 but for wall/cabin/pedestal fan of any type

S&F in repairs Fan capacitor 2.5 MFD, 250 V.

S&F in repairs Fan capacitor 4.0 MFD, 250 V.

Suppy & fixing only gear assembly of table/wall mounted/air circulator/ pedastal fan suitable for easy air circulatig movements of any size of fan

Labour charges for machine work enlargement of bushing housing to house bearing 6201 in place of bushing in modification for longer services.

S&F fan clamp assembly consisting of nut, bolts, washers and split pin alongwith suitable size rubber real for mounting of fan down rod.

M&L for down rod for ceilling fan of any make and sweep made out of medium grade GI tubing 15 mm dia duly painted with two coats of enamel paint and provision of holes for electric wire at top and bottom also arrangemnts for fittment of ceiling fan motor,clamp assembly and condensor all specified and directed by Engineer in charge

M&L for Machine work such as fan hook,FI clamps, nuts, bolts, washers etc duly painted complete all as specified & directed by Engineer-in-Charge.

S&F copper flexible twin twisted cable of size 23/ 0.0076 of 1 mtr length.

Painting of fan, motors & blades by dismantling blades, scraping down old paint , rust, dirt, grease etc cleaning and preparation of motors and blades surfaces, and spray painting with two coats of approved apcolite enamel paint over one coat of primer all as directed by Engr-in-charge.

S&F louver complete for exhaust fan of size 300mm

S&F louver complete for exhaust fan of size 380mm.

S&F louver complete for exhaust fan of size 450mm.

Disconnecting carefully water and electric connection from geyser, taking down carefully storage type water heater of any type and capacity and dismantling geyser by removing glass wool, thermostat, heating element for checking of defects, repalcement of defective thermostat, heating element of any capacity, indicating lamps (round/rectangular) flange assembly, top or bottom cover half round plate glass wool etc where required, cleaning of inner container by anti corrosive liquid removing scales repair by brazing, Re-assemblong of geyser and refixing at its original location and testing complete(Replacement of spares such as heating element , thermostat, indicating lamp, top and bottom cover, haalf round plate, glass wool heating flange assembly will be measured and paid under relevent items) all as directed

M&L for replacement of heating assembly (flange) made out of copper/steel as existing including heat resistance and leak proof gasket suitable for 25 ltrs capacity geyser all as directed Make : Ditzs/ Racold/ Shakti/Spheroat

All as per item No 33 above but for 35/50 lts capacity

S & F Power Board for 50/35 Ltr Digital Square water heater. Cat No ZOS-CHR-063 Make : Jaquar

S&F in repair thermostat having range 0 to 100 C for geyser as original size of 25/35/50ltrs capacity geyser sutiable for Ditzs/ Racold/ Shakti/Spheroat Make.

S&F in repair heating element 2 KW with round or triangular base for 50 ltrs capacity geyser sutiable for Ditzs/ Racold/ Shakti/Spheroat Make.

S&F in repair heating element 1.5 KW with round or triangular base for 35 ltrs capacity geyser sutiable for Ditzs/ Racold/ Shakti/Spheroat Make.

S&F in repair heating element 1 KW with round or triangular base for 25 ltrs capacity geyser sutiable for Ditzs/ Racold/ Shakti/Spheroat Make.

S&F in repair lamp indicator with red colour 230 volts complete with fixing arrangement round or rectangular shape and size as per existing geyser suitable for Ditzs/ Racold/ Shakti/Spheroat Make.

S&F in repair cord flexible 230 volts 3 core 4 sqmm copper conductor PVC insulated and sheated cable from geyser to power point not less than 2 mtr to each geyser all as directed

S&F in repair bottom cover made out of MS sheet of suitable size and gauge as existing for 25/50 ltrs capacity geyser including necessay fixing screws, washers, nuts and bolts of suitable size as as directed suitable for Ditzs/ Racold/ Shakti/Spheroat

S&F in repair top cover made out of MS sheet of suitable size and gauge as existing for 25/50 ltrs capacity geyser including necessay fixing screws, washers, nuts and bolts of suitable size as as directed suitable for Ditzs/ Racold/ Shakti/Spheroat

S&F in repair over load safety release valve ISI marked suitable for 25/50 ltrs capacity geyser including necessay fixing screws, washers, nuts and bolts of suitable size as as directed suitable for Ditzs/ Racold/ Shakti/Spheroat

Prepairing the old painted surface of geyser body and type and size with wire brusheds, sand paper and applying one coat of white synthetic enamel paint by spraying including marking MES No with black paint in 3 cm high block letters complete all as directed

S&F in repair non return valve 15mm dia heavy duty and fixing on original position of geyser all as directed and confiring ot IS suitable for geyser Make : Ditzs/ Racold/ Shakti/Spheroat

S&F in repair glass wool superior quality around the water container as heat resistance upto full capacty all as drected suitable for geyser Make : Ditzs/ Racold/ Shakti/Spheroat

S&F in repair stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for 15 mm bore iron pipe on existing position for geyser Make : Ditzs/ Racold/ Shakti/Spheroat

S&F in repair new galvanised steel water tubing 15 mm dia medium grade including all necessary new GI fittings and fixed complete to wall from tank to geyser in let/out let all as specified and as directed by Engineer-in-Charge for geyser Make : Ditzs/ Racold/ Shakti/Spheroat

Servicing of Inverter single phase AC input 160 to 260 V and out put 230 + 1 % of capacity 5 KVA including making electric connection cost of replacement of any related part for smooth functioning of the inverter is deemed to be included under quoted rate.

Replacement of Unservicable Battery for Invertor 12 Volt/180 Ah flooded type Make : Exide Express/Bosch/Tata BP.

M&L Supply only distilled water in sealed container for topping up battery cell electrolite level.

M&LSupply only petroleum jelly

Servicing the low specific gravity batteries by way of replacement of electolyte/charging and testing complete all as directed.

Servicing of voltage stabilisers of capacity 5 KVA copper wounded for automatic operation single phase 230 Volt 50 cycle AC supply suitable for incoming voltage 170 to 280 volts stabilized between 200 to 230 volts complete with servicing to low and high voltage cut off device 2 to 3 minute "delay" relay and 5 seconds "off" delay having provision of instant start switch, volt meter and indicating lamps complete including fixing arrangements all as directed.

Supply and fix in repair Switch piano flush type single pole one way 5 Amp , Make Anchor/ Havells Rio,/HPL complete all as specified and as directed by Engineer-In-Charge. Notes applicable for BOQ item No 56 to 139 (a) One numbers of electrician and one helper shall be present at Office of Engineer-In-Charge at 9 AM every day for taking of instructions regarding repairs to be carried out on the day on preority , T&P required inclusive of safty equipment and transport required to carry out repair works in the Technical/Rakshanagar Area and any area of Air Force Station Ojhar.(b) Alternate Electricians deployed inplace of regular electrician has to work on Sunday/holiday to attend the faults/defects/ complaints.In case if electrician fail to report or found absent or fail to rectify the falut ,then ,recovery as per P S Clause 4.4 on page No 146 shall be recovered from contractors any due payments.(c) The repair work on any single day may be ordered to be carry in number of places/ buildings in one day i.e. in one building quantity of any of BOQ item (s) to be carried may be 1 or more and number of BOQ items to be executed on any single day may also be 1 or more (d) Contractor shall not have any claim on account of order of 1 or more quantities of 1 or more of items of BOQ that to be executed in 1 or more buildings and or Areas in any of single day and even the same on any number of days during contract period , since the effect of labour element on this account is deemed to be included in the Quoted rates by the tenderer for all items of BOQ of this tender. Note:- Complaints/Defects will be rectified withen 8 Hrs of intimated time. if complaints not rectified, a recovery of an amount of Rs 250/-/ complains/ day will be recoverd from the RAR/ FB

Supply and fix in repair Modular switch one way 6 Amp,1 Module , Make Anchor Roma / Legrand.

Supply and fix in repair Modular switch one way 16 Amp, 1 Module , Make Anchor Roma/Legrand.

Supply and fix in repair Switch piano flush type single pole one way 15 Amp, Make Anchor/Havells Rio.

Supply and fix in repair Bell push flush type 5 Amps. Make : Anchor/ Havells Rio.

Supply and fix in repair Modular bell push 6 Amp,1 Module , Make Anchor Roma/ Legrand.

Supply and fix in repair Modular Fan regulator electronic step type 230 V, 2 Module. Make : Anchor Roma/ Legrand

Supply and fix in repair Fan regulator electronic step flush type 230 V, Make : Anchor/ Havells Rio./HPL

Supply and fix in repair Ding Dong AC 230 Volts single pole. Make : Anchor/ Press Fit

Supply and fix in repair Socket out let 2 in 1, 5 pin 5 Amps flush type. Make : Anchor/ Havells Rio/HPL.

Supply and fix in repair Socket out let 2 in 1, 3 pin 5 and 15 Amps flush type. Make : Anchor/ Havells Rio./HPL

Supply and fix in repair Switch socket combination outlet 5 pin 6 Amps 16 Amps 2 in 1 flush type.Make: Anchor/ Havells Rio./HPL

Supply and fix in repair Switch socket combination outlet 5 pin 5 Amps 2 in 1 flush type,Make : Anchor/Havells Rio/HPL.

Supply and fix in repair Modular Socket outlet 6A/16 Amps 2/3 pin combined 2 module. Make : Anchor Roma/ Legrand.

Supply and fix in repair Modular Socket outlet 6 Amps 2/3 pin combined 2 module, Make : Anchor Roma/ Legrand.

Supply and fix in repair Lamp holder PVC/polycarbonate insulated body with back plate suitable for batten fittings. Make : Anchor/ Havells Rio./HPL

Supply and fix in repair Lamp holder PVC/ polycarbonate insulated body with cord grip cap suitable for pendent fittings. Make : Anchor/ Havells Rio./HPL

Supply and fix in repair Ceiling rose surface type, PVC/ Polycarbonate isloted body size 50 x 28 mm three terminals. Make : Anchor / Havells Rio./HPL

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts 10 KA C series. Make : Standard/ HPL/L & T.

Supply and fix in repair MCB SPN 6 to 32 Amps 240 volts 10 KA. Make : Standard/ HPL/ L & T.

Supply and fix in repair MCB SPN 40 to 60 Amps 240 volts 10 KA. Make : Standard/ HPL/L & T.

Supply and fix in repair MCB TPN 40 to 63 Amps 415 volts 10 KA. Make : Standard/ HPL/ L & T.

Supply and fix in repair Sheet metal enclosure for DB’s with out bus bar for 2 way 240 volts. Make : Standard/ HPL/L & T Legrand.

Supply and fix in repair Sheet metal enclosure for DB’s SPN, with 100 amps rated bus bar , 4 way ,240 volts double door. Make : Standard /HPL/ L & T.

Supply and fix in repair Sheet metal enclosure for DB’s SPN, with100 amps rated bus bar , 8 way ,240 volts double door. Make : Standard /HPL /Legrand.

Supply and fix in repair Sheet metal enclosure for DB’s TPN, with 200 amps rated bus bar , 4 way ,415 volts double door. Make : Standard /HPL /Legrand.

Supplying and fix in repair sheet metal enclousers with socket, plug top and MCBs, single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB , single pole, 240V of capacity 20 amps, Make : Standard /HPL /Legrand. complete all as specified and as directed by Engineer-in-Charge.

Supplying and fix in repair Tempra piug & socket DB and MCBs, TP and neutral enclouser with a three pin and earth plug and socket complete with one TPN MCB , 240V of capacity 32 amps of L & T or equivalent in Legrand/HPL, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix sheet metal encloser distribution board 415volt, Vertical TPN 4 Way with provision for DH 100 series MCCB of legrand make as incomer and SP/ TP MCBs as outgoing as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface /reccess mounting IP-43 protection of L&T Cat No DBVTL004GD or equivalent in Legrand / Siemens, complete all as specified and as directed by Engineer-in-Charge.

S&F MCCB TP ,Thermal magnatic with enclouser , 415 Volts,50 HZ, 36 KA, 100 Amps DZ1 Cat No DZ1T0100DXD1A of L&T or equivalent Model of Legrand, Siemens, complete all as specified and as directed by Engineer-in-Charge.

S&F MCCB TP ,Thermal magnatic with enclouser , 415 Volts,50 HZ, 50 KA, 125 Amps DZ1 Cat No DZ1T0125NXD1A of L&T or equivalent Model of Legrand, Siemens, complete all as specified and as directed by Engineer-in-Charge.

S&F MCCB TP ,Thermal magnatic with enclouser , 415 Volts,50 HZ, 36 KA, 250 Amps DPX^3 Cat No 420339 of Legrand or equivalent Model of L & T, Siemens, complete all as specified and as directed by Engineer-in-Charge.

S&F MCCB TP ,Thermal magnatic with enclouser , 415 Volts,50 HZ, 36 KA, 400 Amps DPX^3 Cat No 422058 of Legrand or equivalent Model of L & T, Siemens, complete all as specified and as directed by Engineer-in-Charge.

Supply & Fix in repairs MCB TP 32 Amps 440 volts 50HZ of L&T Cat No BB30320C or equivalent in Legrand /Seimens, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC rectangular board 10Cm x 10Cm x 5cm deep. Make : Press Fit or equivalent , complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC rectangular board 175mm x 100mm x 50mm deep. Make : Press Fit or equivalent, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC rectangular board 200mm x 150mm x 50mm deep. Make : Press Fit or equivalent, complete all as specified and as directed by Engineer-in-Charge.

Supply only Flourscent tublar lamp, T5 24 watts suitable for fixing in BTSLF 424 MS luminaires of crompton Make or equavalent of Bajaj/Havells

Supply only Electronic Ballast 48 watts suitable for operating T5 2x24 w Lamps in position on existing LT pole any type , Make -,Bajaj or equevalant of /Havells,crompton

Supply only PVC side holder suitable T5 24w flourscent Lamp, Make- Bajaj/ Philips/CG

Supply and fixing CRYSTA LED T8 tube rod 1x20 Watt (single side connection) (4 ft) . Make - Crompton Cat No-LT8-20-865-2 or Wipro/Philips.

Supply and fix in repair Starter universal FSU for 230/240 volt, AC supply suitable 20/ 36/40 watt FTL Cat No. FSU of Make-Crompton or equivalent of Bajaj/ Philips.

Supply and fix in repair CFL Lamps of capacity 1x36 watts, Four pin/ linear suitable for CFL wall/ ceiling light fittings. Make-Crompton or equivalent of Philips/ Bajaj

Supply and fix in repair POLARIS I 36W LED 5700K Recessed full open 2x2 Tile, Glare free unifrom illumination with longer life and less maintenance..For armstrong/ grid/ POP ceiling complete with separate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting, complete all as specified and directed by Engineer-in-charge. MAKE : CROMPTON , Model No. LCTLSNE--36-FO-CDL or equivalent in Wipro./Philips.

Supply and fix suspended 40 watt CONSTA LED linear lighting system suitable for continous mounting, frosted PMMA diffuser and high reflective aluminium reflector provided with surge compressor of 2.5kv to perform an erratic power condition, IP 20 CLASS I, 5700 K complete with connecting accessories & driver duly pre-wired and connecting up with 0.5 sq mm 3 core flexible copper cable cord from fitting, with suspension system as per site requirement complete all as specified and as directed by engineer in charge. Make: Havells Model No. CONSTA1144LP40WLED830SPCWH or equivalent in Crompton/ wipro

Supply and fix in repair decorative ultra slim square profile linear Laser Ray lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 20W LED 6000K, complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No. LDLSR20-CDL or equivalent in Havells./Bajaj.

Supply and fix in repair decorative ultra slim square profile linear Laser Ray lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 10W LED 6000K, complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No.LDLSR 10-CDL or equivalent in Wipro./Philips.

Supply and fix in repair decorative ultra slim square profile linear Laser Ray lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 5W LED 6000K, complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No.LDLSR 5-CDL or equivalent in Wipro./Philips.

Supply & Fix in repair Post top lantern decorative HERITAGE LED suitable 1X20 Watt retro LED with opel deffuser including LED 20 Watt of Make Crompton Cat Part No LPTH-20-CDL or equivalent in Phillips/ Wipro.complete all as specified and directed by Engineer- in-charge.Note:-Warranty for light fitting should be three yrs.Note:-Warranty for light fitting should be three yrs.

Supply & fixing FLP - WP LED Tube Light Fitting suitable for for 2 x 20W x 4' T8 tube with LED tube , spring loaded bipin holders, connector block etc complete with all the accessories, suitable cable entries but without cable gland, painted with epoxy powder coating paint, SS hardware, 1No. internal & 2Nos. external earthing screw of M6 size with 2Nos. plain washer and heat resistance clear toughened type 'A' glass of Borosil make, complete all as specified and directed by Engineer-in-Charge. Make :-Crompton as per Cat. No. EXTN2LT8-16/20.

Supply & fixing FLP - WP LED Tube Light Fitting suitable for for 1 x 20W x 4' T8 tube with LED tube , spring loaded bipin holders, connector block etc complete with all the accessories, suitable cable entries but without cable gland, painted with epoxy powder coating paint, SS hardware, 1No. internal & 2Nos. external earthing screw of M6 size with 2Nos. plain washer and heat resistance clear toughened type 'A' glass of Borosil make, complete all as specified and directed by Engineer-in-Charge. Make :-Crompton as per Cat. No. EXTN1LT8-16/20.

Diconnection/Removing & Isolating the existing electric supply of 250/400 watt highway light fitting from roof structure carefully including arranging necessary T&P and safety devices for carrying out work at a hight of 15 to 20 mtr from floor level and taking down the same for repair and refitting at its original location including connecting testing complete all as directed by Engr-in- Charge

Labour only for opening of 250/400 watt highway light fitting for repair work accessaries such as ballast, ignitor, lamp and lamp holder etc and checking and testing for their servicablity status and reassembling after replacement following UNSV spare parts and testing complete all as directed. (Note- supply only spare parts shall be measured saperatly under sl item No. 65 to 70 here in after)

Supply only Open construction heavy duty (OC) copper ballast suitable 250 watt HPSV/Metal Halide lamps, Cat No. HDBL25S/MH of Crompton Make or equivalent Modle of Havells/Bajaj.

Supply only Open construction heavy duty (OC) copper ballast suitable 400 watt HPSV/Metal Halide lamps, Cat No. HDBL40S/MH of Crompton Make or equivalent Modle of Havells /Bajaj.

Supply only Metal halide lamp suitable for highway light fitting of capacity 250 watt, 230/240 volts, 50 HZ type MH SEE - 400K Cat No MHL 250W SE ELLIPTICAL E-40 Crompton Make or equivalent Model of Havells/Bajaj,

Supply only Metal halide lamp suitable for highway light fitting of capacity 400 watt, 230/240 volts, 50 HZ type MH SEE - 400K Cat No MHLM 400W SE ELLIPTICAL E-40 Crompton Make or equivalent Model of Havells/Bajaj,

Supply only Ignitors suitable for HPSV/MH lamp fittings 70/150/250/400 watts , cat part No. IGN112S/MH of Crompton Make or equivalent modle of Havells/Bajaj,

Taking down existing copper/aluminum point wiring (light/ fan/ socket or power points) complete including (fittings such as switches, ceiling roses, pendents, regulators, sockets etc including wooden battens /casing /capping and conduit etc and making good disturbed surface of walls, ceilings and floors etc. complete all as specified & as directed by Engineer-in-Charge.

M&L for Point wiring with 1.5 Sqmm (nominal area) PVC FRLS insulated sheathed copper stranded conductor cable run in and including on surface of wall/ celling/ floor ,PVC casing caping as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets, fan regulators etc for one light/ fan/ call bell point controlled by one 1- way switch, complete all as specified & as directed by Engineer-in-Charge.

All as per item No 115 but for One 5 Amps socket point on same board / below board with other switches.

All as per item No 115 but for One 5 Amps switch socket on independent board.

M&L for Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run in wall/floor PVC medium grade conduit not less than 20 mm as per IS with all fittings such as bends, tee, junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge. Note - Cutting and making good of chasis in wall/roof/floor is included in the qtd rates.

All as per item no 118 but for One 5 Amps socket point on same/below board with other switches.

All as per item no 118 but for One 5amps switch socket point independent.

Supply & fix Ceiling rose surface type, PVC/ Polycarbonate isolated body size 50 x28 mm three terminals. Make : Anchor/Haveiis Rio, complete all as specified & as directed by Engineer-in-Charge.

Supply & Fix Socket outlet 6 Amps 2/3 pin combined 2 module Make : Anchor/ Roma/ Legrand, complete all as specified & as directed by Engineer-in-Charge.

Supply & fix Modular switch one way 6 Amp,1 Module , Make Anchor/ Legrand/ Crabetree, complete all as specified & as directed by Engineer-in-Charge.

M&L for Point wiring with 2.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run in wall/floor PVC medium grade conduit not less than 20 mm as per IS with all fittings such as bends, tee, junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge. Note - Cutting and making good of chasis in wall/roof/floor is included in the qtd rates.

Supply & fix Modular switch one way 16 Amp, 1 Module , Make Anchor/ Legrand/ Crabetree ,complete all as specified & as directed by Engineer-in-Charge.

Supplying and fixing Modular socket, 6/16 amps-2/3 pin combined, 2 Module, complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair Modular Fan regulator electronic step type 230 V, 2 Module. Make : Anchor Roma/ Legrand

Supplying and fixing in repairs Modular white cover plate with frame, 3 Module, Make Legrand /Anchor Roma/Crabetree.

Supplying and fixing in repairs Modular white cover plate with frame, 6 Module, Make Legrand /Anchor Roma/Crabetree.

Supply & fix metal fiush mounting box 3 module.

Supply & fix metal fiush mounting box 6 module.

Supply & fix rigid non metalic PVC conduit medium grade 20mm dia exclusive of boxes (junction / terminal) but inclusive of all required fittings such as tee, bends, elbow, reducer, bell mount, tube ends and fixing accessories such as coupler, lock nuts saddles, pipe hooks etc in surface in wall/ celling/ floor etc. complete all as specified & as directed by Engineer-in-Charge.

M&L for wiring for circuit/ sub main wiring of 2x2.5 Sqmm + 1x1.5 Sqmm earth wire, alongwith earth wire PVC (FRLS) insulated copper conductor, single core, 1100 V grade cable in surface/ in PVC conduit, complete all as specified & as directed by Engineer-in-Charge.

M&L wiring for circuit/ sub main wiring of 2x4 Sqmm + 1x2.5 Sqmm earth wire, alongwith earth wire PVC (FRLS) insulated copper conductor, single core, 1100 V grade cable in surface/ in PVC conduit, complete all as specified & as directed by Engineer-in-Charge.

Supply only PVC insulation tap 8 mtr Make :-Anchor/prss fit/MLH

Supply & Fixing Plug top 3 pin 5 Amps Make Anchor/Leader/Cona

Supply & fixing Plug top 3 pin 15 Amps Make Anchor/Leader/Cona

Supply & Fix Decorative wall mounting, FLORETINE WL 1LS B22 SS light Fitting made up of brushed nickel finish fixture with Opal Glass diffuser suitable foe 10 W LED lamp B22 base. including LED ADDRE LAMP 10 Watt of Make Havels Cat Part No LHFOAJE1TZ1I060 or equivalent in Bajaj/ Wipro. complete all as specified and directed by Engineer- in-charge.

Supply & fixing Plug top 3 pin 15 Amps Make Anchor/Leader/Cona

MAHIMA CONSTRUCTION

K R Electricals

Kedar Electricals

DIAMOND ENTERPRISES