CERTAIN REPAIR TO WOODEN FURNITURE AT MILITARY STATION SRI GANGANAGAR

Amount

S&F in replacement Ply wood 4mm thick ISI marked with teak face on inner side (front portion) and commercial face on outer side (back portion) of the head board and 4mm thick plywood ISI marked commercial face on both side of the head board (back portion) of Bed Ply wood (Hard Bed) along with Teak Wood beading 4mm thick & 30mm wide to sides and top of head board complete all as specified and directed by Engineer - in – Charge Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Ply wood 4mm thick ISI marked with teak face on inner side (front portion) and commercial face on outer side (back portion) of the foot board and 4mm thick plywood ISI marked commercial face on both side of the foot board (back portion) of Bed Ply wood (Hard Bed) along with Teak Wood beading 4mm thick & 30mm wide to sides and top of head board complete all as specified and directed by Engineer - in – Charge Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement long rail made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement short rail after making the same from long rail complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable Note:- Short shall be from with long rail obtained from srl item No '3' .

S&F in replacement Plywood top (Cover) 12 mm thick plywood BWR ISI marked, of size 1800mm x 900mm complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Legs made out of Ist class Hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Plywood top (cover) 12mm thick plywood BWR ISI marked of size 1980 x 850mm complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Head board made out of 18 thick prelaminated particle board ISI marked alongwith PVC beading to sides and top of head board complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Foot board made out of 18mm thick prelaminated particle board ISI marked alongwith PVC beading to sides and top of foot board complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement PVC Shoes for legs of bed hard map complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable

S&F in replacement Top of tables dining 6 persons made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak Wood beading alround complete all as specified & directed by Engineer-in-Charge. Drg No. FD-239, FD-273

S&F in replacement Top of tables dining 8 persons made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak Wood beading alround complete all as specified & directed by Engineer-in-Charge. Drg No. FD-239, FD-273

S&F in replacement Legs of table dining 8/6 persons made out of Ist class Hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273

S&F in replacement front rail of dining 6 persons made out of Ist class Hard Wood Shisham complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273

S&F in replacement front rail of dining 8 persons made out of Ist class Hard Wood Shisham complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273

S&F in replacement side rail of table dining 8/6 persons made out of Ist class hard wood Shisham complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273

S&F in replacement Top of the table writing made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer-in-Charge Drg No. FD-275

S&F in replacement shutter of cup board of the table writing made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275

S&F in replacement side and back of cup board of the table writing made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275

S&F in replacement drawer table writing made out of 6mm thick ply wood commercial face both sides ISI marked at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275

S&F in replacement leg table writing made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg No. FD-275

S&F in replacement Top of side board made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge. Drg : F-241

S&F in replacement Side of side board made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : F-241

S&F in replacement Back of side board made out of 6mm thick ply wood commercial face both sides ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : F-241

S&F in replacement Drawer of side board made out of 6mm thick plywood commercial face both side ISI marked at bottom and 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg : F-241

S&F in replacement leg of side board made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : F-241

S&F in replacement Top of peg table made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement leg of peg table made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement short rail of peg table made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement Long rail of peg table made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384

S&F in replacement Top of Teapoy verandah made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge

M & L for applying one coat of synthic enamel paint wihite to teapoy Verandha including preparation of surfaces complete all as specified and directed by Engr-in-Change

S&F in replacement mirror of table dressing Gents complete all as specified and directed by Engineer-in-Charge. Drg No -FD-230, FD-379

S&F in replacement back ply of table dressing made out of 6mm thick ply wood ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379

S&F in replacement Top of table dressing made out of 12mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379

S&F in replacement drawer of table dressing made out of 6mm thick plywood commercial face both side ISI marked at bottom & 12mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge.Drg No -FD-230, FD-379

S&F in replacement mirror frame of table dressing made out of Ist class hard shisham complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379

S&F in replacement mirror of table dressing ladies complete all as specified & directed by Engineer-in-Charge. Drg : FD-251, FD-378

S&F in replacement 5mm thick sliding glass with aluminium channel (anodised) of table dressing ladies complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378

S&F in replacement Drawer of table dressing ladies, made out of 6mm thick ISI marked plywood commercial face both sides at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378

S&F in replacement back ply of table dressing ladies 12mm thick ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378

S&F in replacement mirror frame of table dressing ladies, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378

S&F in replacement back ply of mirror table dressing ladies 6mm thick ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378

S&F in replacement top of table centre, made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg :FD-231, FD-274, FD-232, FD-278, FD-382

S&F in replacement Leg of table centre, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge

S&F in replacement Top of Teapoy made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg : FD – 235, FD-382

S&F in replacement Leg of teapoy, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD – 235, FD-382

S&F in replacement Long rail of table centre, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-231, FD-274, FD-232, FD-278, FD-382

S&F in replacement Short rail of table centre, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-231, FD-274, FD-232, FD-278, FD-382

S&F in replacement Top of table size 900 x 600 x 760 mm, made out of 18mm thick prelaminated particle board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge. Drg : FD-223,FD-224, FD-283, FD-284

S&F in replacement leg of table size 900 x 600 x 760 mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284

S&F in replacement Drawer of table size 900 x 600 x 760 mm, made out of 6mm thick ISI marked plywood commercial face both sides at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284

S&F in replacement long rail of table size 900 x 600 x 760 mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284

S&F in replacement short rail of table size 900 x 600 x 760 mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284

S&F in replacement Stiffener long and short of table size 900 x 600 x 760 mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284

S&F in replacement Top of table bed side, made out of 18mm thick prelaminated partical beading board ISI marked alongwith 4mm Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement Side of table bed side, made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement shelf of table bed side, made out of 12mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement back ply of table bed side made out of 6mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248

S&F in replacement Top of table size 900 x 900 x 760 mm, made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick teak wood beading alround complete all as specified & directed by Engineer-in-Charge. Drg : FD-291

S&F in replacement leg of table size 900 x 900 x 760 mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-291

S&F in replacement rails of table size 900 x 900 x 760 mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-291

S&F in replacement Top of table Draftsman made out of 18mm thick prelaminated particle board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge. Drg No- FD 04(M)

S&F in replacement Drawer large of table Draftsman made out of 6mm thick ISI marked plywood commercial face both side at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg No- FD 04(M)

S&F in replacement Leg of table Draftsman made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg No- FD 04(M)

S&F in replacement short and long rail of table Draftsman made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg No- FD 04(M)

S&F in replacement Glass Pane (4mm thick) of Notice board (2440x1220mm) complete all as specified & directed by Engineer-in-Charge. Drg : FD-99(m)

S&F in replacement soft board of notice board 12mm thick ISI marked with green baize cloth complete all as specified and directed by Engineer - in – Charge. Drg : FD-99(m) Note : Baize Green cloth should not be less than the rate of Rs. 175/- per RM.

S&F in replacement aluminium Hasp & stapple (anodised) of size 75x35x3mm of notice board complete all as specified and directed by Engineer - in – Charge. Drg : FD-99(m)

S&F in replacement butt Hinges 75mm long medium weight mild steel cold rolled of notice board complete all as specified and directed by Engineer - in – Charge. Drg : FD-99(m)

S&F in replacement Top of table size 2135x1065x19mm conference/Library, made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading complete all as specified & directed by Engineer-in-Charge. Drg : FD-08, FD-287(m)

S&F in replacement Leg of table size 2135x1065x19mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-08, FD-287(m)

S&F in replacement short rail of table size 2135x1065x19mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-08, FD-287(m)

S&F in replacement long rail of table size 2135x1065x19mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-08, FD-287(m)

S&F in replacement mirror of Hat Stand complete all as specified & directed by Engineer-in-Charge. Drg : FD-235, FD-361

S&F in replacement Front teak face ply of Hat Stand made out of 4mm thick plywoodteak face at one side and commercial face at other side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361

S&F in replacement Back Ply of Hat Stand made out of 4mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361

S&F in replacement Beading 35mm wide, 6 mm thick alround the hat stand made out of teak wood complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361

S&F in replacement Copper oxide steel pegs 120 mm long of Hat Stand complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361

S&F in replacement Top of Book case size 1065x300x19mm, made out of 19mm thick block board ISI marked with 1mm thick laminated sheet and complete all as specified & directed by Engineer-in-Charge. Drg : FD-45(m), FD-237

S&F in replacement shutter of Book case size 1065x300x19mm, made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237

S&F in replacement shelf of size 380x205x18mm of Book case made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237

S&F in replacement back ply of Book case made out of 6mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237

S&F in replacement shelf (size 735x275x18mm) of Book case made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237

S&F in replacement Leg of Book case made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237

S&F in replacement MS Hinges medium weight cold rolled of size 50mm long of book case complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237

S&F in replacement Top of table card size 900x900x19mm, made out of block board ISI marked covered with baize green cloth complete all as specified & directed by Engineer-in-Charge. Note : Baize green cloth should not be less than the rate of Rs. 175/- per (RM) Drg : FD- 91, FD-352

S&F in replacement Long rail of table card size 900x900x19mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD- 91, FD-352

S&F in replacement Drawer of table card size 900x900x19mm, made out of 12mm thick plank of Ist class hard wood shisham for sides & 6mm thick ply wood commercial face both side ISI marked at bottom complete all as specified and directed by Engineer - in – Charge. Drg : FD- 91, FD-352

S&F in replacement Leg of table card size 900x900x19mm, made out of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD- 91, FD-352

S&F in replacement Top of Almirah Mess utensils size 1065x434x19mm, made out of block board ISI marked covered with 1mm thick laminated sheet along with 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge. Drg : FD-93

S&F in replacement Shelf of Almirah Mess utensils size 1025x420x19mm, made out of planks of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

S&F in replacement Shelf of Almirah Mess utensils size 1025x270mmx19mm thick, made out of planks of Ist class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

S&F in replacement Back Ply of Almirah Mess utensils size 1065x1570x10mm, made out of 10mm thick plywood commercial face both sides ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

S&F in replacement Shutter of Almirah Mess utensils made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

S&F in replacement Aluminium handle anodised 100mm long complete of Almirah Mess utensils complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

S&F in replacement hasp & staple 75mm long of aluminium anodised of Almirah Mess utensils complete all as specified and directed by Engineer - in – Charge. Drg : FD-93

M & L for French polishing on Teak wood one or more coats to exposed surface including preparing the surface of bed ply wood top complete all as specified & directed by Engineer-in-Charge. Drg : FD-214, FD-215, FD-245, FD-246,

M & L for French polishing on Teak wood one or more coats to exposed surface including preparing the surface of table dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge Drg : FD – 273/ 239

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table writing complete all as specified and directed by Engineer - in – Charge. Drg : FD – 275

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of side board complete all as specified and directed by Engineer - in – Charge Drg : FD – 241

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table peg complete all as specified and directed by Engineer - in – Charge Drg : FD – 236, FD – 277, FD – 284, FD-383 & 384

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table dressing gents complete all as specified and directed by Engineer - in – Charge Drg : FD – 230, FD-379

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table dressing ladies complete all as specified and directed by Engineer - in – Charge Drg : FD – FD – 251, FD-378

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table centre / teapoy complete all as specified and directed by Engineer - in – Charge Drg : FD – 232, FD – 278. FD – 235, FD-382

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table 900 x 600 X 760 MM with or without drawer complete all as specified and directed by Engineer - in – Charge Drg : FD – 223, FD – 224, FD – 283, FD – 284

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table bed side complete all as specified and directed by Engineer - in – Charge Drg : FD – 276, FD-248

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table 900 X 900 X 760 MM complete all as specified and directed by Engineer - in – Charge Drg :FD – 291

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of Table Drafts man complete all as specified and directed by Engineer - in – Charge Drg : FD – 4 (M)

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of Notice board complete all as specified and directed by Engineer - in – Charge Drg : FD – 99 (M)

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of table Conference/Library complete all as specified and directed by Engineer - in – Charge. Drg : FD – 8 AND FD-287 (M)

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of Hat Stand complete all as specified and directed by Engineer - in – Charge Drg : FD – 233 FD-361

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of Book Case complete all as specified and directed by Engineer - in – Charge Drg : FD – 45 (M) , FD-237

M & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of Table Card complete all as specified and directed by Engineer - in – Charge Drg : FD- 91, FD-352

AM & L for French polishing on Teak wood, one or more coats to exposed surface including preparing the surface of Almirah Mess Utensils complete all as specified and directed by Engineer - in – Charge Drg : FD – 93

S&F in replacement knob of CP Brass as per existing design and size to various wooden furniture where as required complete all as specified and directed by Engineer - in – Charge

S&F in replacement receptacle PVC made out of 22 gauge PVC sheet complete all as per drawing complete all as specified and directed by Engineer - in – Charge Drg : FD/E6/MAP/13

S&F in replacement bath mat PVC made as per drawing complete all as specified and directed by Engineer - in – Charge Drg : FD/E6/MAP/07

S&F in replacement of mirror of dressing mirror Gents complete all as specified and directed by Engineer - in – Charge Drg : FD/E6/MAP /16

S&F in replacementof 100 mm thick foam rubber cushion of size 530x560 mm , 32 density duly covered with tapestry cloth for seat and back complete all as specified and directed by Engineer-in-Charge. Note : Tapestry cloth should not be not less than the rate of Rs 175/- per mtr Drg : FD-258 , FD-281 and FD -373

S&F in replacement of arm of sofa set single or 3 seater made out of 1st class hard wood (Shisham) duly french polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement leg of sofa set single or 3 seater made out of 1st class hard wood (Shisham) duly french polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement side rail/front rail (size 100 mm x 35 mm) of sofa set single or 3 seater made out of 1st class hard wood (Shisham) duly french polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement front rails of sofa set 3 seater made out of 1st class hard wood (Shisham) duly french polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement (seat and back) batten of sofa set single or 3 seater made out of 1st class hard wood (Shisham) duly french polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement bottom rail of seat and back of sofa set 3 seater made out of 1st class hard wood (Shisham) duly french polished complete all as specified and directed by Engr-in-Change Drg : FD-258 , FD-281 and FD -373

S&F in replacement top (size 1900 x 685 mm) of table dining ORs made out of 19mm thick block board commercial type ISI marked covered with 1mm thick laminated sheet including 4mm thick teak wood beading complete all as specified and directed by Engr-in-Change Drg : FD-165 (M)

S&F in replacement members of frame of table dining ORs/Forms with or without back such as legs, stiffeners etc made out of M.S. pipe 25 Sqmm (16 gauge wall thickness) including cutting, welding, bending etc providing one coat of red oxide primer complete all as specified and directed by Engr-in-Change Drg : FD-165 (M) 77 (M) 78 (M)

M & L for applying one coat of synthetic enamel paint including preparation of previously treated/old steel surface of mild steel tube frame of table dining ORs complete all as specified and directed by Engineer -in- Charge. Drg : FD-165 (M)

M & L for applying one coat of synthetic enamel paint including preparation of previously treated/old steel surface on frame of form without back complete all as specified and directed by Engineer -in- Charge. Drg : FD-77(M)

M & L for applying one coat of synthetic enamel paint including preparation of previously treated/old steel surface on frame of form with back complete all as specified and directed by Engineer -in- Charge. Drg : FD-78(M)

S&F in replacement seat plank (size 1525x255x25mm) of form without back made out of 1st class hard wood (Shisham) including GI nuts, bolts and washers etc and french polishing complete all as specified and directed by Engr-in-Change Drg : FD-77(M)

S&F in replacement seat plank (size 1900x255x25mm) of form without back made out of 1st class hard wood (Shisham) including GI nuts, bolts and washers etc and french polishing complete all as specified and directed by Engr-in-Change Drg : FD-77(M)

S&F in replacement seat plank (size 1800x255x25mm) of form without back made out of 1st class hard wood (Shisham) including GI nuts, bolts and washers etc and french polishing complete all as specified and directed by Engr-in-Change Drg : FD-78(M)

S&F in replacement seat plank (size 1800 x 150 x 25mm) of form without back made out of 1st class hard wood (Shisham) including GI nuts, bolts and washers etc and french polishing complete all as specified and directed by Engr-in-Change complete all as specified and directed by Engineer-in-Charge Drg : FD-78(M)

S&F in replacement of Seat cushion of chair dining cushioned, 75mm thick of 32 density duly covered with tapestry cloth complete all as specified and directed by Engr-in-charge. Drg : FD/E6/MAP-II/04 Note :- Tapestry cloth should not be less than the rate of Rs. 200/- per RM.

S&F in replacement Front leg of chair dining made out of 1st class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04

S&F in replacement Rear leg of chair dining made out of 1st class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04

S&F in replacement Front/side/back rail of chair dining made out of 1st class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04

S&F in replacement Stiffener of chair dining made out of 1st class hard wood shisham complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04

M & L for French polishing one or more coats to surface exposed to view including preparing the surface of Sofa Set 4/5 seater complete all as specified and directed by Engineer - in - Charge . Drg : FD – 258, FD – 281, FD – 373

M & L for French polishing one or more coats to surface exposed to view including preparing the surface of chair dining cushioned complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04

S & F in replacement of shutter of TV trolley with glass pane 5.5 mm thick, hinges and catcher complete all as specified & directed by Engr-in-Charge. Drg : FD/E6/MAP/04®

S & F in replacement of coster of TV trolley complete all as specified & directed by Engr-in-Charge. Drg : FD/E6/MAP/04®

S & F in replacement top and bottom of TV trolley made out of 18mm thick prelaminated particle board ISI marked alongwith 4mm thick Teak wood beading alround and bottom made out of 8mm thick plywood commercial face both side ISI marked complete all as specified & directed by Engr-in-Charge. Drg : FD/E6/MAP/04®

S & F in replacement back and side of TV trolly made out of 6mm thick plywood commercial face both side ISI marked and side made out of 18mm thick prelaminated particle board ISI marked complete all as specified & directed by Engr-in-Charge. Drg : FD/E6/MAP/04® Note :- French polishing shall be carried to the parts of the furnitures to the surfaces exposed to view only.

Note : Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

vardhman traders

JAIN TRADERS