Provision of balance work in Community Hall in Lower Chaulanthi in ward No 19 Sanjauli

Amount

Brick work using common burnt clay building bricks in foundation and plinth in :-Cement Mortar 1:3 (1 Cement : 3 Sand) Second Class Bricks including carrage of material in all lead's and lift's

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position. 2nd class deodar wood.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enameled iron butt hinges with necessary screws – 40mm thick – 2nd class deodar wood.

Providing and fixing anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 250x16mm

Providing and fixing aluminum tower bolts (barrel type) anodized trans parent or dyed to required shad and colour with screws etc. complete. 250x10mm

Providing and fixing 150mm aluminum handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete

Providing and fixing 100mm aluminum handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 (1Cement:4 Sand).

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1 cement: 6 sand)

Providing and fixing8mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete

P/F 8mm thick virified tiles in skurtings

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign sand papering and knotting. Readymixed paint brushing wood primer pink

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping. i) With enamel paint other than white

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. With ready mixed priming paint brushing red lead, Red-oxide/zinc oxide chrome.

Painting two coats (excluding priming coat on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters Enamel paint other than white

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in gratings framed guard bars, ladders, railing, brackets and similar works

Providing 40x3 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 (1 cement: 3sand: 6 graded stone aggregate 20mm nominal size)

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete

Providing and fixing 300mm bright finished hard drawn hooks and eyes.

Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor twolevel

Beams,cantilivers, girders and lintels Sides and Soffits of beams, beam haunchings, contiliver girders, bressumers and lintels not exceeding 1 Metre in depth:

Providing mild steel/ Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor all level-tor steel

Durgesh Singh

suresh jagta