SPECIAL REPAIR TO WASHROOMS OF TRAINING BLOCK P-19, CAMP AREA , PROVISION OF ALUMINIUM GRILL WITH FRAME FOR WINDOWS IN BUILDING NO 73 AND PROVISION OF METALLIC SLIDING GATE NEAR 48 POS ACCDN AT INS AGRANI, COIMBATORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M/L Non skid ceramic tiles, coloured, 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06Sqm but not exc 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and directed.

M/L Coloured glazed ceramic tiles in verticle surfaces 300x450x7mm, set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles complete all as specified and directed.

M/L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4.(Backing coat) complete all as specified and directed.

M/L cement concrete type B-0 1:2:4, using 12.50mm graded aggeregate, 25mm thick as in base concrete to tile flooring complete all as specified and directed.

M/L screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness(below or abover ground level) complete all as specified and directed.

M/L cement concrete type C2,1:3:6 using 40mm graded aggregate, as in plinth protection, 100mm thick complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M/L rendering 5mm thick on fair face of concrete surfaces in cement mortar 1:3 as in ceiling plaster , finished even and smooth without using extra cement complete all as specified and directed..

M&L for rendering 10mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished een and smooth without using extra cement with using water proofing compound complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M/L preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M/L preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over a coat of alkali resistant priming coat complete all as specified and directed.

M/L preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant priming coat.

Taking down chowkhats or frames n exc 1.5 sqm with shutters, without taking off shutters from the frames complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S& F Sheet glass ordinary quality,4mm thick and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS squre tube complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S/F Butt hinges medium weight, cold rolled, mild steel 100mm complete all as specified and directed.

S/F aluminium handles cast type,anodized 150 mm long complete all as specified and directed.

S/F aluminium anodized barrel tower bolt of extruded section, 150mm long complete all as specified and directed.

S/F aluminium alloy, anodized, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving exc 15cm thickness above ground level. (Sunken floor)complete all as specified and directed.

M/L Rendering 15 mm thick in cement mortar 1:3 on concrete surfaces of wall/floor as in sunken floors , finished even and smooth without using extra cement, including application of two coats of water proofing chemical paste of brush bond powder and Nito bond liquid manufactured by MS FOSROC as per manufacturers instruction.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

M/L Cement concrete type C2 , 1:3:6 , using 40mm graded stone aggregate, as in sunken floor treatment etc complete all as specified and directed.

Taking up or down UPVC/steel tubing and connections, including cleaning for refixing or removal to store 20/25mm bore complete all as specified and directed.

M&L 3 payer PP-RC (Polypropylene random copolymer) pipes outer dia 16mm SDR 7.4 & PN 16 UV stalilised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete fixed /concealled on wall floor ceiling all as specified and directed.

All as per ser Item No 34 but of size 20mm outer dia complete all as specified and directed.

All as per ser Item No 34 but of size 25mm outer dia complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required fixed on wall,110/75/50mmdia, including all fittings.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, 50mm dia, fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, 75mm dia, fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, 110 mm dia, fixed to walls complete all as specified and directed.

S&F PVC (SWR) Bends 50mm bore complete all as specified and directed.

S&F PVC (SWR) Bends 75mm bore complete all as specified and directed.

S&F PVC (SWR) Bends 110 mm bore complete all as specified and directed.

PVC (SWR) branch piece, single (single Y) equal or unequal, with access door 75mm bore complete all as specified and directed.

PVC (SWR) branch piece, single (single Y) equal or unequal, with access door 110mm bore complete all as specified and directed.

PVC (SWR) branch piece, double (double Y) equal or unequal 75mm bore complete all as specified and directed.

PVC (SWR) branch piece, double (double Y) equal or unequal 110mm bore complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore complete all as specified and directed.

PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore complete all as specified and directed.

PVC (SWR) junction double, (double T), equal or unequal 75mm bore complete all as specified and directed.

PVC (SWR) junction double, (double T), equal or unequal 110mm bore complete all as specified and directed.

S/F PVC(SWR) floor trap,plain with grating, including jointing with solvent cement, 75mm complete all as specified and directed.

S/F PVC(SWR) floor trap,plain with grating, including jointing with solvent cement, 63mm complete all as specified and directed.

S/F PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed..

PVC (SWR) vent cowl 75mm complete all as specified and directed.

PVC (SWR) vent cowl 110mm complete all as specified and directed.

S&F PVC (SWR) "P" trap 110mm dia complete all as specified and directed.

S&F PVC (SWR) "S" trap 110mm dia complete all as specified and directed.

Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all as specified

S&F Pillar taps,fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. Bore of pipe 15mm, fixed in repairs complete all as specified and directed.

S&F Tubular towel rail,brass chromium plated, 20mm dia, D type, 60cm long between flangesetc, fixed in repairs complete all as specified and directed.

S&F brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, 32mm dia complete all as specified and directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),complete, fixed in repairs.

S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, for wash down water closet, fixed in repairs complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern,10Ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets, PVC flush pipe 32mm dia complete, fixed in repairs complete all as specified and directed.

S&F Chromium plated fancy type brass Stop valves/ Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,15mmdia, fixed in repairs complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Health faucet , brass , chromium plated suitable for 15mm bore pipes, length of pipe 1.50m, in repairscomplete all as specified and directed.

S&F in repairs Bib taps, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore complete all as specified and directed.

S&F in repair Grating doom 125mm dia of PTMT(Minimum weight 25gms) complete all as specified and directed.

S& F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair Toilet paper holder of brass, chromium plated (CP) brass screws complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed .

M&L for concealed point wiring with multistranded colour code copper conductor in FRLS PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new MS boxes of 1.6 mm thick including one coat of synthetic enmelled black paint and providing new 3mm thick ISI marked laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for one light point/fan point/bell point controlled by one switch. Note : Red/Blue/Yellow for phase, black for Neutral and Green for Earth.

All as per item No. 77 here in before but one three pin socket outlet 5 Amps, on independent Board complete all as specified and directed.

All as per item No. 77 here in before but one 3 pin socket outlet 15 amps independent with cable 2.5 Sqmm complete all as specified and directed.

Taking down of old unsv sub main wiring aluminium/copper of any capacity and making the good disturb surfaces complete all as specified and directed.

M&L for concealed sub main wiring with 3 run of 4 sq mm for phases, neutral and earth using single core multistranded copper conductor as per IS 694 PVC (FRLS) insulated, unsheathed ,multistrandard copper conductor drawn in and including concealed 20mm PVC rigid conduit ISI marked with all accessories etc and earth conductor connected to common earth dolly complete all as specified and directed. Note:- 3 runs of 4 Sqmm cable and one run of PVC conduit measured as one unit

Supply & Fixing switch piano, flush type single pole one way 5 Amps,230V complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 5 and 15 amp ,230V flush type complete all as specified and directed.

Supply & Fixing switch piano, flush type single pole one way 15 Amps,230V complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 3 pin 5 A complete all as specified and directed.

Supply and fixing Ceiling rose 3 terminal Polycarbonate, isolated body complete all as specified and directed.

Supply and fixing sheet metal enclosure single pole and neutral 8 way double door with 200 amps rated bus bar complete all as specified and directed.

S&F Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) SP 5 to 20 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

All as per item No. 88 above but for as above but SPN 32 Amps complete all as specified and directed.

Supply and fixing LED lights fitting 1x 22W, 220V, lumen 6500K sleek and seamless profiled extruded aluminium battern with efficient diffuser including driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet 10 watt 220V AC decorative type with driver holder lumen 6500K sleek and seamless profiled extruded aluminium/polycarbonate battern with efficient diffuser and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and direced.

S&F anodised aluminium grill of opening size 3"x3" and thickness not less than 6mm all as specified. Note:- Fixing of frame of grills shall be done with SS screws/bolts of grade as complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.complete all as specified and directed.

M/L PCC 1:4:8 type D2 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat and rough finished surface complete all as specified and directed.

M&L for Reinforced Cement Concrete(Nominal mix) 1:2:4 type B-1(20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surface complete all as specified and directed.

M& L for Reinforced Cement Concrete(Nominal mix) 1:2:4 type B-1(20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Returning, filling in soil/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated materials to outside MOD Land and deposited where directed at a level n. exc. 1.50m above the starting point complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No.101 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. complete all as specified and directed.

M&L for Mild steel in Framed work as in doors or Sliding gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410W(Gde E-250) quality-A, complete all as specified and directed.

S&F Guide Roller for providing to Stand vertical possition, balancing and smooth functioning of Sliding Gate, complete all as specified and directed.

M&L for Mild steel in Framed work as in Drain Grill Covers including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surface of any description over 10cm in width or girth, not otherwise described.complete all as specified and directed.

M&Lfor Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Machine pressede precast concrete interlocking pavor block any shape and size confirming to IS 15658-2006 of 80mm thick , M-40 Grade all as specified fixed with grey cement and pigment complete all as specified and directed.

Providing, cement concrete 1:2:4 type B-1(20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, complete all as specified and directed.

M&L for Pre-cast cement concrete Type C1 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in CM 1:4 complete. complete all as specified and directed.

M/L PCC 1:2:4 type B1(20mm graded agg) as in coping, band, filling of hold fast etc including formwork complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S/F second class hard wood plain solid straight chowkats and frames, wrought, frames rebated on the solid rounded on chamfered , put together with glue, pinned at joints complete all as specified and directed.

S&F 40 mm thick, Second class hard wood Plain, framed, panelled shutters (02 Number of panels, 01 No partical board and 01 No Glass as per directed by Engr in Charge), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers:

S&F 35 mm thick Second class hard wood Glazed and skeleton shutters( 04 Number of panels as per directed by Engr in Charge), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars,any numbers complete all as specified and directed.

M&L 5.5mm thick sheet glass exc 0.5 sqm each pane ordinary quality fixed with beads, complete all as specified and directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S/F floor door stopers of aluminium alloy body and tounge, anodized with hard drawn steel spring, fixed in floor, 150mm long complete all as specified and directed.

S/F aluminium alloy, anodized, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.

S&F cast iron Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and repair complete all as specified and directed.

S&F Bands , straps, supports or straps for rainwater, ventilating pipes , including bolts , if required ; hooks (stay), heavy , for large gates; hook and pintle hinges; large hasps and staples ; chains;hand made sliding bolts ; clampls ; hold fast ; wall ties ; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

M/L preparation of new wooden surfaces exc10cm widht or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified and directed.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 4 Sqmm 2 core complete all as specified and directed.

S&F post top lantern LED type 20W 230 volts AC 5700 K lumen pure polyester UV resistant powder coated die cast aluminium housing with PMMA clear diffuser outdoor type with decorative post outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant with driver and lamp complete all as specified and directed.

S&F rigid non metallic PVC conduit exclusive of boxes 20mm (junction/terminal) but inclusive of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers ,lock nuts,saddles,pipe hooks etc.complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of antifungal paint over a coat of primer complete all as specified and as directed.

S&F for stainless steel peg set of three complete all as specified and as directed.

Vidya constructions