Vidhayak Nivas-2 (Naya) sthit Awas No.-106B me 02 bathroomon ke poorn naveenikaran karne, shatigrast fittings avem fixtures badalne, kitchen top badalne, deemak dwara shatigrast darwazon ko badalne va anya avashyak vibhinn civil sambandhi marammati

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. D.A.R No-15.23.1

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (D.A.R No-15.56)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In Lime mortar. D.A.R No-15.7.3

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 25 mm nominal dia Pipes D.A.R No- 18.7.3

Providing and fixing Clorinate Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DAR No- 18.8.2

Providing and fixing of CPVC gate valve of 25mm dia nominal size of approved quality as per directed by Engineer-in-Charge.

Providing and fixing SWR pipes as per IS: 13592 110mm dia for drain & sewer system with trenching refilling & testing of joints complete including labour T&P etc.

Providing and fixing SWR pipes as per IS: 13592 90mm dia for drain & sewer system with trenching refilling & testing of joints complete including labour T&P etc.

Providing and fixing of PVC Door bend of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm DAR No- 12.42.3.2

Providing and fixing of Nahani Trap of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge.

12 mm cement plaster of mix: 1:4 ( 1 cement 4 coarse sand) (DAR No- 13.4.1)

Brick work with common burnt clay (non modular) brick of class-150 in superstructue above plinth level up to floor V level in all shapes and sizes in. Cement mortar 1:4 ( 1 cement 4 coarse sand) (DAR No- 6.4.1)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.A.R No- 11.40)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.( dsr. 8.31)

Providing and fixing of white glazed earthen ware Wash Hand Basin with pedestal Sepia, Size- 565x450x175mm, Cat No- C8872 with C.P jali, C.P angle valve, pvc waste pipe, C.P basin mixture, PVC connection 15mm dia 400mm long including supply of all materials labour T&P etc. required for proper completion of the work.

Providing and fixing of white glazed earthen ware Wash Hand Basin without pedestal Cera Make (Cornet Size, 630x450x225 mm) Cat No- S2040104 with C.P jali, C.P angle valve, pvc waste pipe, C.P Piller cock, PVC connection 15mm dia 400mm long including supply of all materials labour T&P etc. required for proper completion of the work.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. DSR No- 17.81

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cost Iron P or S trap 10 litre low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors whever required. White Vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. D.A.R No-17.1.1

Providing and fixing C.P. Brass Two way bibcock heavy code No-0257 L&K or Equivalent make including supply of all material, labour T&P etc. complete.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality& make as approved by Engineer in charge. 15 mm nominal dia. Dsr 17.22b

Supply and Fixing C.P. brass bib cock 15mm. dia. Short body L&K 0057 including supply of all materials, labour, T&P etc. required for proper completion of the work.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore dsr 18.53.1

Providing and fixing of glass shelf 22" Acrylic make with C.P. Guard standard size and bracket including supply of all material labour T&P required for proper completion of the work.

Providing and fixing of glass corner Acrylic make, including supply of all material labour T&P required for proper completion of the work.

Providing and fixing C.P. brass OVER HEAD shower with arm heavy quality L&K 0668) with 15mm inlet:100 mm diameter

Providing and fixing C.P. Brass Two way angle valve 15 mm dia ( L &K 0327 make) with wall flange including supply of all material, labour T&P etc. complete.

Supply and fixing C.P. Health Faucet with 8mm Dia 1.00 mtr. Long Flexible tube & wall hook L&K Make including supply of all material, labour T&P etc. complete.

Providing and fixing CP towel Rod OF L&K Make 600x20mm together with pair of CP brass brackets to fit the towel rail complete

Providing and fixing CP towel ring L & K or equivelent fittings arrangement of approved quality.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (D.A.R No-17.31)

Providing and fixing C.P. Soap Dish l&k make including supply of all material , labour T&P etc. complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl depth 200 mm Kitchen sink without drain board DSR 17.10.2.1

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore DSR 18.51.1

Providing and fixing fly proof wire gauze to windows, celestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. ( DAR No- 10.29.2)

Providing and fixig ISI marked flush door shutters conforming to IS : 2202 (Part-1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matches commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shulters. 30 mm thick including ISI maked Stainless Steel bolt hinges with necessary. (D.A.R No-9.21.2)

Providing and fixing 18 mm thick gang saw cut mirror polished, premoulded and prepolished machine cut for kitchen platforms, vandy counters. Window sills facias and similar locations of required size, approved shade colour and texture laid over : 20 mm thick base cement mortar 1:4 ( 1 cement 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, Area of slab over 0.50 sqm DAR. No- 8.2.2.2

Supply and Fixing of Stainless Steel Curtain rod including fancy knob and brackets including supply of all material, labour, T&P etc. required for proper completion of the work.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, rallings, brackets, gates and similar works. DAR No- 10.25.2

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers fillied with white lead, incuding a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces) excluding the coast of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275gm/m2. D.A.R No- 12.1.1

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. D.A.R No- 15.60

Please Enable Macros to View BoQ information