Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 LAccepted-AOC CB 288 RING ROAD NARAINA NEW DELHI NEW DELHI 28 | NEW DELHI | DELHI | 110028 | ₹11.2 L | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹11.9 L+₹70,040 (6.26%)Rejected-Finance | ₹11.9 L+₹70,040 (6.26%) | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹12.0 L+₹79,540 (7.11%)Rejected-Finance WZ 346 E IIND FLOOR NEAR SALVAGE PARK NANGAL RAYA NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | ₹12.0 L+₹79,540 (7.11%) | L3 | Rejected-Finance Other than lowest |
| 4 | L4₹13.2 L+₹2.0 L (17.9%)Rejected-Finance RZ 212F D BLOCK RAJ NAGAR PART II PALAM COLONY NEW DELHI 110077 | SOUTH WEST | DELHI | 110077 | ₹13.2 L+₹2.0 L (17.9%) | L4 | Rejected-Finance Other than lowest |
| 5 | L5₹13.4 L+₹2.3 L (20.2%)Rejected-Finance | ₹13.4 L+₹2.3 L (20.2%) | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | MV Engineers And Contractors L4 | M/s ELECTROSHINE ENGINEERS L6 | Surjit and Sons L2 | Shiv Enterprises L9 | BLUE HILL ELECTRICAL AND ELECTRONICS L10 | ANAND ASSOCIATES L3 | VOLINA ELECTRONICS PRIVATE LIMITED L7 | PRABHAT ENGINEERING SOLUTION AND SERVICES L5 | Electro Tech Systems L1 | Aulten Digital Private Limited L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply Installation, testing and commissioning of servo voltage stabilizer 500 KVA (Confirming to BIS 9815 : Part 1 : 1994) outdoor/ indoor type for automatic operation three phase 50HZ naturally oil cooled indoor type unbalance type, copper wound, metallic body duly power coated with lifting hooks two No digital dispaly type relay free smooth and silent operation with lst filling of transformer oil upto level having following specification :-
(a) Input voltage 360V-480V
(b) output voltage stabilizer at any designed/ desired voltage 415V+-1%
(c) Rated frequency-50HZ
(d) No distortion in wave form
(e) Response time not to be exceed 20 mili seconds
(f) Sensitivity -(+/-) 1%
(g) Rate of correction 8 vol per second for single phase and 13 V/ second for phase to phase
(h) Efficiency -more than 95%
(j) Type of load : three phase, unbalanced type.
(k) Digital display voltmeter/ Ammeter with multi- functional meter
(l) Operating temperature- For indoor use upto max ambient temp + 550C
(m) Class of insulatin - Class F
(n) Mode of operation Automatic/ Manual
(o) Winding Temperature rise - Max 550C (100C above operating temp)
(p) Transformer oil-IS 335 marked
(q) Core- CRGO M4 Grande/ CRNO (Cold Roll Grain Oriented)/ (Cold Rolled Non- Oriented)
(r) Auto transformer (Variac)-100 percent coper wound Electrolytic Grade
(s) Losses - As per IS Norms
(t) Standard Fitting & Accessories e.g marking plate, lifting lugs, CI rollers, Earthing Terminals etc cable Box
Protection :
(a) Overload load/ short circuit protection.
(b) High/ Low voltage cut off.
(c) By pass arrangement i n case emergency.
(d) Single phase sequence change/ Phase fail protection.
Make – AE/Andrewyule/Sinetrac/Volina/Vinitec/ /APLAB/Microtech. | 1 | Each | 7,69,000 ₹7,69,000 | 7,69,900 ₹7,69,900 | 6,50,000 ₹6,50,000 | 8,49,500 ₹8,49,500 | 10,00,000 ₹10,00,000 | 7,50,000 ₹7,50,000 | 8,15,000 ₹8,15,000 | 7,59,999 ₹7,59,999 | 6,19,000 ₹6,19,000 Lowest | 8,74,500 ₹8,74,500 |
| 2.00 | Supply and Laying , jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 400 sqmm 04 core laid in trenches, ducts, pipes complete all as specified and directed. | 50 | RM | 1,900 ₹95,000 | 3,109 ₹1,55,450 | 1,950 ₹97,500 | 3,000 ₹1,50,000 | 5,495 ₹2,74,750 | 800 ₹40,000 Lowest | 3,150 ₹1,57,500 | 2,149 ₹1,07,450 | 3,150 ₹1,57,500 | 3,000 ₹1,50,000 |
| 3.00 | Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre below normal ground level ) connected to and including galvanized iron strip 32x6mm as earth lead by means of bolts nuts check nuts and washers of galvanized iron or steel including charcoal dust, common salt and 20 mm GI mediumgrade watering pipe with funnel and wire mesh,40mm GI light grade pipe for protection of GI strip upto test point including PCC pit in PCC 1:2:4 type B-1 (using 20 mm grade crushed stone aggregate) frame 40mm thick RCC cover reinforced with 8 mm steel bar 100C/c bothways with MS handle complete including excavation and earthwork all as specified and shown on electrical plate No 3 of MES Sch 2009 (Part-I) | 4 | Each | 4,500 ₹18,000 | 7,300 ₹29,200 | 4,600 ₹18,400 | 6,000 ₹24,000 | 5,500 ₹22,000 | 2,800 ₹11,200 Lowest | 6,750 ₹27,000 | 6,499 ₹25,996 | 6,000 ₹24,000 | 4,000 ₹16,000 |
| 4.00 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to pole or any other indicated situation for loop earthind etc as required with 32X6mm galvanized iron strip all as specified and directed. | 20 | RM | 120 ₹2,400 | 189 ₹3,780 | 220 ₹4,400 | 150 ₹3,000 | 170 ₹3,400 | 90 ₹1,800 Lowest | 150 ₹3,000 | 179 ₹3,580 | 245 ₹4,900 | 5,000 ₹1,00,000 |
| 5.00 | Supply and fix GI tubing light grade of 100mm dia for protection of under ground cable fixed on pole/ cross arms with MS clamp with nut,bolt,washer etc
NOTE - clamps,nuts,bolts,washers etc measured and paid separately . | 10 | RM | 230 ₹2,300 | 1,109 ₹11,090 | 1,200 ₹12,000 | 800 ₹8,000 | 180 ₹1,800 Lowest | 600 ₹6,000 | 800 ₹8,000 | 899 ₹8,990 | 1,700 ₹17,000 | 5,000 ₹50,000 |
| 6.00 | M&L for providing plain cement concrete in Type 1:3:6 C2 Type (using 40mm graded stone aggregate) in foundations, filling & mass concrete las in foundation of pole complete all as specified | 2 | Cum | 3,600 ₹7,200 | 6,669 ₹13,338 | 4,000 ₹8,000 | 5,000 ₹10,000 | 200 ₹400 Lowest | 9,000 ₹18,000 | 6,000 ₹12,000 | 4,499 ₹8,998 | 3,230 ₹6,460 | 10,000 ₹20,000 |
| 7.00 | M&L for construction of plinth for servo Voltage stabilizer 2.5 m x 2.5 with x1.5 incl moorum filling and PCC at top 10 cm thick (1:2:4) and foundation with 1:4:8 (2.7 m length in square foundatiion 25 cm height ) all as per drawing provide by the departmernt including plastering to exposed walls and white wash , providing MS channel on top of size 75x40x 8mm of 1.5 m length for rolling to servo Voltage stabilizer, including chain link fencing of wire mesh 150x100 size made out 4 MM dia GI wire of height 1.5 m fixed with the help of MS strip 25x6 mm on and including MS angle iron75x45x6 mm thick12 Nos post by the means of drilling holes at the distance of 30 cm and fixed with the help of suitable nut, bolt and washe the length of MS angle iron not less than 2.25m top of post bend to the shape of 60 dgree including 03 Nos cuts for inserting barbed wire including 03 run of barbed wire and including provision of gate of size 1.5m x0.9m made out of MS angle iron 50x50x6mm and MS bar 12 mm dia for meshing to the gate and locking arrangement including PCC foundation 1:3:6 for posts all as specified and PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in plate form etc complete all necessary from work complete, all as specified and directed by Engr- in - charge. | 1 | JOB | 69,000 ₹69,000 | 1,09,900 ₹1,09,900 | 1,00,000 ₹1,00,000 | 1,05,000 ₹1,05,000 | 15,000 ₹15,000 | 70,000 ₹70,000 | 1,12,500 ₹1,12,500 | 74,999 ₹74,999 | 7,900 ₹7,900 Lowest | 70,500 ₹70,500 |
| 8.00 | Supply and Fixing , on Load Changeover Switch 04 pole 400 Amp 415 Volt | 1 | RM | 28,000 ₹28,000 Lowest | 35,490 ₹35,490 | 40,000 ₹40,000 | 48,500 ₹48,500 | 45,000 ₹45,000 | 70,000 ₹70,000 | 48,000 ₹48,000 | 48,899 ₹48,899 | 29,000 ₹29,000 | 35,000 ₹35,000 |
| 9.00 | Supply and fixing Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size. | 10 | Each | 120 ₹1,200 Lowest | 199 ₹1,990 | 320 ₹3,200 | 200 ₹2,000 | 450 ₹4,500 | 1,500 ₹15,000 | 200 ₹2,000 | 298.9 ₹2,989 | 250 ₹2,500 | 5,000 ₹50,000 |
| 10.00 | Supply Installation, testing and commissioning of servo voltage stabilizer 25 KVA (Confirming to BIS 9815 : Part 1 : 1994) outdoor/ indoor type for automatic operation three phase 50HZ naturally oil cooled indoor type unbalance type, copper wound, metallic body duly power coated with lifting hooks two No digital dispaly type relay free smooth and silent operation with lst filling of transformer oil upto level having following specification :-
(a) Input voltage 360V-480V
(b) output voltage stabilizer at any designed/ desired voltage 415V+-1%
(c) Rated frequency-50HZ
(d) No distortion in wave form
(e) Response time not to be exceed 20 mili seconds
(f) Sensitivity -(+/-) 1%
(g) Rate of correction 8 vol per second for single phase and 13 V/ second for phase to phase
(h) Efficiency -more than 95%
(j) Type of load : three phase, unbalanced type.
(k) Digital display voltmeter/ Ammeter with multi- functional meter
(l) Operating temperature- For indoor use upto max ambient temp + 550C
(m) Class of insulatin - Class F
(n) Mode of operation Automatic/ Manual
(o) Winding Temperature rise - Max 550C (100C above operating temp)
(p) Transformer oil-IS 335 marked
(q) Core- CRGO M4 Grande/ CRNO (Cold Roll Grain Oriented)/ (Cold Rolled Non- Oriented)
(r) Auto transformer (Variac)-100 percent coper wound Electrolytic Grade
(s) Losses - As per IS Norms
(t) Standard Fitting & Accessories e.g marking plate, lifting lugs, CI rollers, Earthing Terminals etc cable Box
Protection :
(a) Overload load/ short circuit protection.
(b) High/ Low voltage cut off.
(c) By pass arrangement i n case emergency.
(d) Single phase sequence change/ Phase fail protection.
Make – AE/Andrewyule/Sinetrac/Volina/Vinitec/ /APLAB/Microtech. | 3 | Each | 1,09,000 ₹3,27,000 | 1,10,000 ₹3,30,000 | 85,000 ₹2,55,000 | 1,50,000 ₹4,50,000 | 1,80,000 ₹5,40,000 | 72,000 ₹2,16,000 Lowest | 1,20,000 ₹3,60,000 | 1,00,999 ₹3,02,997 | 83,400 ₹2,50,200 | 94,500 ₹2,83,500 |
Tender Value
₹16.6 L
EMD Value
₹33,226
Closing Date
27 Nov 2025, 6:00 pmClosed
GE UTILITY PLANT AND MACHINERY DELHI CANTT-10
GE UTILITY PLANT AND MACHINERY KIRBY PLACE DELHI CANTT-10
PROVN OF 500KVA STABILIZER FOR CENTRAL AIR CONDITIONING PLANT AT WARDEC UNDER GE (U) PM DELHI CANTT10
2025_MES_731003_3
GE(U)/PM/D-37/2025-26
Open Tender
Miscellaneous Works
Item Rate
180 days
Delhi Cantt
MES contractor enlisted under class E cat b(i) having deposited standing security of Rs 50000 with department. Contractor not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class an
6 documents required · 6 mandatory
₹500
GE UTILITY PLANT AND MACHINERY DELHI CANTT-10
₹33,226
Yes
5 Jan 2026
13 Nov 2025
29 Nov 2025
13 Nov 2025
27 Nov 2025
20 Nov 2025
Amount
Supply Installation, testing and commissioning of servo voltage stabilizer 500 KVA (Confirming to BIS 9815 : Part 1 : 1994) outdoor/ indoor type for automatic operation three phase 50HZ naturally oil cooled indoor type unbalance type, copper wound, metallic body duly power coated with lifting hooks two No digital dispaly type relay free smooth and silent operation with lst filling of transformer oil upto level having following specification :- (a) Input voltage 360V-480V (b) output voltage stabilizer at any designed/ desired voltage 415V+-1% (c) Rated frequency-50HZ (d) No distortion in wave form (e) Response time not to be exceed 20 mili seconds (f) Sensitivity -(+/-) 1% (g) Rate of correction 8 vol per second for single phase and 13 V/ second for phase to phase (h) Efficiency -more than 95% (j) Type of load : three phase, unbalanced type. (k) Digital display voltmeter/ Ammeter with multi- functional meter (l) Operating temperature- For indoor use upto max ambient temp + 550C (m) Class of insulatin - Class F (n) Mode of operation Automatic/ Manual (o) Winding Temperature rise - Max 550C (100C above operating temp) (p) Transformer oil-IS 335 marked (q) Core- CRGO M4 Grande/ CRNO (Cold Roll Grain Oriented)/ (Cold Rolled Non- Oriented) (r) Auto transformer (Variac)-100 percent coper wound Electrolytic Grade (s) Losses - As per IS Norms (t) Standard Fitting & Accessories e.g marking plate, lifting lugs, CI rollers, Earthing Terminals etc cable Box Protection : (a) Overload load/ short circuit protection. (b) High/ Low voltage cut off. (c) By pass arrangement i n case emergency. (d) Single phase sequence change/ Phase fail protection. Make – AE/Andrewyule/Sinetrac/Volina/Vinitec/ /APLAB/Microtech.
Supply and Laying , jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 400 sqmm 04 core laid in trenches, ducts, pipes complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre below normal ground level ) connected to and including galvanized iron strip 32x6mm as earth lead by means of bolts nuts check nuts and washers of galvanized iron or steel including charcoal dust, common salt and 20 mm GI mediumgrade watering pipe with funnel and wire mesh,40mm GI light grade pipe for protection of GI strip upto test point including PCC pit in PCC 1:2:4 type B-1 (using 20 mm grade crushed stone aggregate) frame 40mm thick RCC cover reinforced with 8 mm steel bar 100C/c bothways with MS handle complete including excavation and earthwork all as specified and shown on electrical plate No 3 of MES Sch 2009 (Part-I)
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to pole or any other indicated situation for loop earthind etc as required with 32X6mm galvanized iron strip all as specified and directed.
Supply and fix GI tubing light grade of 100mm dia for protection of under ground cable fixed on pole/ cross arms with MS clamp with nut,bolt,washer etc NOTE - clamps,nuts,bolts,washers etc measured and paid separately .
M&L for providing plain cement concrete in Type 1:3:6 C2 Type (using 40mm graded stone aggregate) in foundations, filling & mass concrete las in foundation of pole complete all as specified
M&L for construction of plinth for servo Voltage stabilizer 2.5 m x 2.5 with x1.5 incl moorum filling and PCC at top 10 cm thick (1:2:4) and foundation with 1:4:8 (2.7 m length in square foundatiion 25 cm height ) all as per drawing provide by the departmernt including plastering to exposed walls and white wash , providing MS channel on top of size 75x40x 8mm of 1.5 m length for rolling to servo Voltage stabilizer, including chain link fencing of wire mesh 150x100 size made out 4 MM dia GI wire of height 1.5 m fixed with the help of MS strip 25x6 mm on and including MS angle iron75x45x6 mm thick12 Nos post by the means of drilling holes at the distance of 30 cm and fixed with the help of suitable nut, bolt and washe the length of MS angle iron not less than 2.25m top of post bend to the shape of 60 dgree including 03 Nos cuts for inserting barbed wire including 03 run of barbed wire and including provision of gate of size 1.5m x0.9m made out of MS angle iron 50x50x6mm and MS bar 12 mm dia for meshing to the gate and locking arrangement including PCC foundation 1:3:6 for posts all as specified and PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in plate form etc complete all necessary from work complete, all as specified and directed by Engr- in - charge.
Supply and Fixing , on Load Changeover Switch 04 pole 400 Amp 415 Volt
Supply and fixing Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size.
Supply Installation, testing and commissioning of servo voltage stabilizer 25 KVA (Confirming to BIS 9815 : Part 1 : 1994) outdoor/ indoor type for automatic operation three phase 50HZ naturally oil cooled indoor type unbalance type, copper wound, metallic body duly power coated with lifting hooks two No digital dispaly type relay free smooth and silent operation with lst filling of transformer oil upto level having following specification :- (a) Input voltage 360V-480V (b) output voltage stabilizer at any designed/ desired voltage 415V+-1% (c) Rated frequency-50HZ (d) No distortion in wave form (e) Response time not to be exceed 20 mili seconds (f) Sensitivity -(+/-) 1% (g) Rate of correction 8 vol per second for single phase and 13 V/ second for phase to phase (h) Efficiency -more than 95% (j) Type of load : three phase, unbalanced type. (k) Digital display voltmeter/ Ammeter with multi- functional meter (l) Operating temperature- For indoor use upto max ambient temp + 550C (m) Class of insulatin - Class F (n) Mode of operation Automatic/ Manual (o) Winding Temperature rise - Max 550C (100C above operating temp) (p) Transformer oil-IS 335 marked (q) Core- CRGO M4 Grande/ CRNO (Cold Roll Grain Oriented)/ (Cold Rolled Non- Oriented) (r) Auto transformer (Variac)-100 percent coper wound Electrolytic Grade (s) Losses - As per IS Norms (t) Standard Fitting & Accessories e.g marking plate, lifting lugs, CI rollers, Earthing Terminals etc cable Box Protection : (a) Overload load/ short circuit protection. (b) High/ Low voltage cut off. (c) By pass arrangement i n case emergency. (d) Single phase sequence change/ Phase fail protection. Make – AE/Andrewyule/Sinetrac/Volina/Vinitec/ /APLAB/Microtech.
Surjit and Sons (BID ID -3481196)
ANAND ASSOCIATES (BID ID -3483896)
MV Engineers And Contractors (BID ID -3478619)
PRABHAT ENGINEERING SOLUTION AND SERVICES (BID ID -3481916)
M/s ELECTROSHINE ENGINEERS (BID ID -3480738)
VOLINA ELECTRONICS PRIVATE LIMITED (BID ID -3480226)
Aulten Digital Private Limited (BID ID -3481992)
Shiv Enterprises (BID ID -3483613)
BLUE HILL ELECTRICAL AND ELECTRONICS (BID ID -3484137)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
D37TENDER.pdf
Tender Documents • 1.30 MB
BOQ_828089.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .