PROVISION OF CERTAIN MINOR WORKS IN HQTC AND CHAFB UNDER GE (AF) BANGALORE

Amount

Supply, install and testing of wall split units indoor/ outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating inverter model capacity 2.0 TR complete all as directed.

Supply and fix voltage stabilizer for authomatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5% and of capacity 5.0 KVA

M&L for submain wiring with two runs of PVC insulated multistranded copper conductor 4.0 Sqmm and one run of earth continuity conductor with PVC insulated multistranded 4.0 Sqmm copper conductor drawn in and including PVC casing & capping accessories laid on surface of wall/ roof etc complete all as directed and specified.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete.

Cutting hole into stone masonry wall not exceeding 450mm thick, built in cement mortar, using stone drilling machine for inserting 65mm dia (50.24 sqcm) PVC pipe including making good the disturbed surfaces all as specified and as directed.

S&F copper tubing for suction/ discharge line, for split type AC suitable upto 2.0TR capacity with cable complete all as specified and directed.

S&F wall mounting bracket, for split type AC suitable upto 2.0TR capacity out door unit complete all as specified and directed.

S&F drain pipe for split type AC complete all as specified and as directed

S & F point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.5 Sqmm 1100 volts grade in and including in stove enamelled steel conduit pipe ISI marked with all accessories and fixing arrangements on wall/ ceiling/ floor etc. Including fixing top cover/ steel junction boxes fixing on wall surface for housing switches/ sockets/ regulators etc. with and including 2.5 Sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :- (a) One light controlled by one single pole switch

Supply and fixing switch flame proof rotary type with termination box in LM6, 16A, single pole 250V

Supply and fixing LED light fitting 1X16 watt flame proof, CMRI certified recommended for gas/ vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up three core flexible copper conductor cable with suitable size.

Design supply and install at site of the TRAY PANEL SCREW type system with aluminium composite panel of approved colour on exterior walls, columns. MS structure, ceiling, coping, slab, projections at all heights and elevation including necessary aluminium framework. The aluminium composite including panel with 4mm thick consist of 3mm thick thermoplastic core of anti toxidant LDPF sandwitched between 2 skins of 0.5mm thick aluminium alloy sheet making a total panel thickness of 4mm, the external surface shall be finished with PVDF based coating on the top side and service coating on the reverse side shall be with a polymer paint. Note : The system shall be designed to withstand a wind pressure of 190 Kg/ Sqm with necessary Alu, sub frames, cleats and shall be fixed to the masonry/ RC wails/ MS structure with necessary clamps, galvanized M.S brackets and anchor fasteners. All clams and brackets shall be Hot dip galvanized minimum 80micorns thick and shall confirm to IS : 4759-1996. Any other accessories such as fastening straps, nuts, bolts, rivets, washers etc other than anchor system shall be in Indian standard grade. All joints of ACP must be sealed with approved sealent of approved colour sealant make DOW CORNING 789 weather sealant. Rate shall include to provide open cell polyethylenen backer rods. Weather sealant etc. all materials and labour complete.

Removing of sign glow letters with electric connection and refixing with rearranging electric connection and making good damage if any

Removing of emblem with electric connection and refixing with rearranging electric connection and making good damage if any

S & F Fire Door of Size 1220 X 2135mm single door profile with 100 X 57 X 1.2mm frame shutter, 0.8 Hardware Doorset, SS single ball bearing butt hinges 101 X 76 X 3mm, clear glass of size 200 X 300mm Normal single door closure, FR 80 pull handle, TGDI D type 250mm Dead lock, ML 103 ET bolt in fill by material, honey comb finish, complete all as specified and directed.

S & F Fire door of Size 915 X 2135mm single door profile, 100 X 57 X 1.2mm frame shuttter, 0.8 Hardware Doorset, SS single ball bearing butt hinges 101 X 76 X 3mm clear glass of size 200 X 300mm Normal single door closure, FR 80 pull handle, TGDI D type 250mm Dead lock, ML 103 ET bolt in fill material honey comb finish, complete all as specified and directed.

M & L for removing old door and finishing the wall with plastering and filling the gaps complete all as specified and directed.

M & L for packing server room with plastic sheet and bubble sheet complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water, etc. all as specfied and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth with out using extra cement, all as specified and directed.

M & L for 2 coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of new surface all as specified.

GKR and CO

SRI GANESH ENTERPRISES

mahadevi Enterprises

M/s BHOOMI ELECTRICALS

SB CONSTRUCTIONS

M/S J S PRAKASAM

raashi constructions