COMPREHENSIVE REPAIR OF BLDG UNDER AOR OF AGE BR DETT-III OF GE 862 EWS

Amount

M&L for preparation of old decorated brick / concrete plastered / un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of lime white wash on walls, pillars, cornices etc, complete all as specified and directed.

All as per srl item No 1 above but on ceiling complete all specified and directed.

M&L for preparation of old decorated brick / concrete plastered / un-plastered surfaces on walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil bound distemper, complete all as specified and directed.

All as per srl item No 3 above but on ceiling complete all specified and directed.

Complete removal of existing treatment over walls, perparation of surface to receive the treatment and applying two coats of distemper oil emulsion over a coat of wall care putty 1.5mm thick and a coat of alkali resistance primer, complete all as specified and directed.

M&L for preparation of old painted wooden and wood based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.

M&L for preparation of old painted steel surfaces of any description (including old tress & roof sheet) exc 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old decorated plastered / un-plastered wall surfaces and applying one coat of cement base paint complete all as specified and directed.

Complete removal of existing treatment over walls, perparation of surface to receive the treatment and applying two coats of cement base paint over a coat of white cement primer, complete all as specified and directed.

Taking down cement plaster on brick walls or concrete surface etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work / concrete/ stone surface, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work/ concrete/ stone surface, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surface of chajjas, roof facias, finished even and smooth without using extra cement, complete all as specifed and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces on walls, pillars, cornices etc and applying two coats of oil emulsion distemper, over a coat of alkali resistant primer including one coat of wall care putty 1.5mm thick, complete all as specified and directed.

M&L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of weather proof exterior emulsion paint, complete all as specified and directed by GE.

S&F for 12mm thick gypsum board in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed.

M&L for GI frame work for seamless ceiling compresing of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding well using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flanges of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including taking down old ceiling board, complete all as specifie and directed

S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per instructions including dismantling of existing board etc, complete all as specified and directed.

S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at wall/ceiling, including 5mm thick PVC sheet fillet of width 35mm for wall/ceiling paneling on PVC/wooden frame as per specification and drawing complete after dismantling of old unserviceble PVC lining, including fillets complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, including dismantling old unserviceable of tiles, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm or 450x350x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4 including dismantling old unserviceable tiles, complete all as specified and as directed.

M&L for vitrified tiles light shade (premium quality) 9-10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling old unserviceable tiles, complete all as specified and directed.

M&L for vitrified tiles light shade (premium quality) 9-10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in dados / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 10 mm thick rendering in cement mortar 1:4 including dismantling old unserviceable tiles, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level and removal of debris from site, complete all as specified and directed.

M&L for 50mm thick plain cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in path / sub base to receive tiles, complete all as specified and directed.

M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.

M&L for Machine cut kota stone slab (mirror polished) flooring 20-22mm thick as in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar 1:4 including demolition of old kota stone, complete all as specified and directed.

S&F in repair overhead PVC water tank lid/ cover threaded or plug type suitable for tanks of capacity 500/1000 ltr, complete all as specified and directed.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and 20mm bore ball brass valve with union screwed for iron pipe and fixed including dismantling of old unserviceable tank, complete all as specifed and directed.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and 20mm bore ball brass valve with union screwed for iron pipe and fixed including dismantling of old unserviceable tank, complete all as specifed and directed.

M&L for overhead PVC tank cleaning of any capacity including dismantling and setting aside or lowering if required for repairs, cleaning, etc and hoisting if required reconnecting and re- fixing in same position after cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc, including replacement of required fittings such as PVC ball valve with brass rod, tank nipple etc, complete all as specified and directed.

S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares not exc 0.50 sqm in each pane including hacking out old broken glass, complete all as specified and directed.

M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors including taking down existing GI tubing, complete all as specifed and directed.

M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors including taking down existing GI tubing, complete all as specifed and directed.

S&F for PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints , fixed to wall with MS clamps of suitable size after dismantling of old unserviceble PVC pipe, complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge.

S&F for PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints, laid in trenchs or in floor or fixed in wall complete after dismantling of old unserviceble PVC pipe all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge.

S&F in repair for vitreous china wash hand basin white, flat back, size 550x400mm size including pedestal, cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed.

S&F in repair vitreous China coloured, counter top wash hand basin, ovel type, size 550mm including cutting for and pinning in but excluding waste pipe, complete all as specified and directed.

S&F in repair for viterous china wash down water closet pan, white (pedestal pattern), including PVC flushing cistern 10 ltr capacity and fixed in floor with brass screw, plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, and inlcuding set of CP jet spray with flexible PVC pipe of superior quality, complete all as specified and directed.

S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe including trap set in concrete and removing debries from site, complete all as specified and directed.

S&F in repair plastic water closet seat cover, black, closed pattern with flat bottom , including mild steel chromium plated or aluminium hinging device fixing with screws or bolts etc, complete all as specified and directed.

S&F in repair for vitreous china half stall type urinals, aqua seal, premium quality, white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe CP brass spreader etc, complete all as specified and directed.

M&L in repair for urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms), complete all as specified and directed.

M&L in repair for towel rack 600mm long with lower hangers by replacing the existing towel rail etc, complete all as specified and directed.

S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repair 15mm CP brass health faucet (hand shower) inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc, complete all as speicified and directed.

S&F in repair for copper alloy chromium plated jet spray suitable for padestal pattern WCs including decorative choice flexible pipe fixed to iron pipe with and inclduing cover plate, complete all as specified and directed.

S&F repair for PVC connection 15 mm x 450 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed.

S&F in repair for PVC waste pipe 600/900mm long suitable for wash hand basins and urinals including connecting, complete all as specified and directed.

S&F in repair for 15mm bore swan neck, pillar cock, cast copper alloy, with capstan heads, chromium plated, fancy type, screwd down high pressure , with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair for 15mm bore brass chromium plated brass wall mixer 2 in 1 two for hot and cold water mixing and one for shower rose, complete all as specified and directed.

S&F in repair for 15 mm bore brass chromium plated wash hand basin mixer hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repair for rectangular glass shelf (with SS bracket) of size 300 x 100 mm long, complete all as specified and directed.

S&F in repair for chromium plated brass shower rose of size 125 mm with swivel joints fixing to steel pipes etc, Complete all as specified and directed.

S&F in repair for 15mm bore Stop valve (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair for 15mm bore bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair for 15mm bore bib tap chromium plated, elbow wrist operated long handle for use in medical/ Lab, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair for 15mm bore Angle valve, cast copper alloy, fancy type, chromium plated suitable for iron pipe and one end and PVC connector on other, complete all as specified and directed.

S&F in repair for gun metal globe or brass gate valve with iron wheel screwed both ends for iron pipe of 15mm bia, complete all as specified and directed.

S&F in repair for gun metal globe or brass gate valve with iron wheel screwed both ends for iron pipe of 20mm bia, complete all as specified and directed.

S&F in repair for CP grating suitable for 75/100mm bore floor trap and fixed with white cement with or without waste hole, complete all as specified and directed.

S&F in repair for shelf of PTMT 300mm including chromium plated brass screw and wooden/ plastic cleat, complete all as specified and directed.

S&F in repair for 18mm dia, 600mm long tubular towel rail made of stainless steel tubes of min thickness 0.75mm, decorative type fixed with and including screws and wooden / plastic cleats, complete all as specifed and directed.

S&F in repair for 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 32mm-45gms, complete all as specified and directed.

S&F in repair for stainless steel sink for hospital (scrub station) with with plugs, washers and waste pipe, including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410mm x 330mmx 160mm complete all as specified and directed.

S&F in repair for assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3-4 shelves, enclosed four sides by SS plain sheet, 0.6 mm squre support pipes, dedicated holes for spoon, pegs etc cover all size 600mmx750mmx250mm of standard pattern, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each and removing from site including making good to disturbed portion, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) exc 1.5 Sqm and n. exc 4 Sqmm each and removing from site including making good to disturbed portion, complete all as specified and directed.

Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each and removing from site, complete all as specified and directed.

S&F for factory made 100% solid WPC door frame 90mm x 45mm single rebated made from polymer composite (single extruded process) material comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 kg/cbm & certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 990N), min compressive strength of 58N/Sqmm, modulus of elasticity 900 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant & fixed in position with SS dash fastener / hold fast of required dia and length, all as per specification, drawing and as directed by Engineer-in-Charge, Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

S&F for factory made 30mm thick 100% solid WPC laminated moulded door shutter of required size comprising of virgin PVC resin of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives, made from extrusion process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg/cbm & certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 2000N face & 1100N Edge), minimum compressive strength of 50N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as per specification, drawing and as directed by Engineer-in-Charge, Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed.

S& F for GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18m and fixed with tinned tacks, or galvinsed wire staples including cutting, welding etc for steel window / ventilators, complete all as specified and directed.

S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and and as directed and as shown on drwaing.

S&F for factory made solid panel PVC door shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F for 100mm long butt hinges medium weight stainless steel (ISI Marked) , complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.

S&F for extruded aluminium alloy handles size 150 mm fabricated type anodised (ISI marked), complete all as specified and directed.

M&L for aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, (ISI Marked), complete all as specified and directed.

S&F for powder coating of any colour (thickness of powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F for powder coated (thickness of powder coating not less than 50 micron) anodised aluminium door shutters, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM /neoprene gasket required (fittings shall be paid for separately) with extruded built up standart tubular section /appropriate Z-sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws all complete as per architectural drawings, complete all as specified and directed.

S&F in repairs door closer hydraulically regulated, aluminium (extruded section body) designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg (ISI Marked), Complete all as specified and directed.

S&F in repair 140mm long floor door stopper of aluminium medium weight colled rolled, complete all as specified.

S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.

S&F for sheet glass 5.5 mm thick, ordinary quality and fixed with aluminum & rubber beading in square n. exc 0.5 sqm in each pane, complete all as specified and directed.

M&L in repair for 18/19mm thick block board Grade-II, interior grade commercial type with decorative face veneer on both faces fixed with screws including 6mm thick teak wood lipping as in cub board including builder hardware fittings, complete all as specified and directed.

S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed (ISI Marked), complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 , complete all as specified and directed.

Description all as per Serial item No 98.00 above but as in half brick thick wall built in cement mortar 1:4. Note : Brick retrieved from demolition will be re-used

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings, complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheeting in roof covering including ridges, complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/ cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.

Dismantling structural steel work including welded fabriks frames, doors, gates, grills grating and framed truss etc, complete all as specified and directed.

M&L for rolled section as in main and cross beams / columns, hip and jack, rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates (Fe-410 W Gde E-250 Quality A) complete all as specified and directed.

S&F for stainless steel tubular railing 50mm bore, SS 316 grade fixing by cutting through the existing wall and attaching the fasteners of railing to the existing reinforcement by welding, vertcal members, including making good the disturbed portion to match with existing specification, complete all as specified and directed.

M&L in repair for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, cooking platforms, in steps, pillars, window cills, etc, laid over 20mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges cutting, polishing etc, complete all as specified and directed.

S&F in repair for 15 mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in repair for door botom sealing strip guard with double sdied insulation for doors, which are equally able to keep wind, dust and soun or poluted air out side of door (anti Lizard strip) fixed to aluminium or wooden door complete all as specified and directed.

MEHTA OM PARKASH (BID ID -3173571)

J. PRO BUILDERS (BID ID -3167537)

VIJAY KUMAR SURI AND SONS (BID ID -3172526)

M/s Anil Engineers & Builders (BID ID -3173159)