Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹83.9 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹1.1 Cr+₹18.1 L (20.1%)Rejected-Finance | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | Rejected-Technical | - | Rejected-Technical Not fulfilled the NIT criteria | |
| 4 | Rejected-Technical C O HILL HARDWARE STORE P R HILL KOHIMA NAGALAND | PHEK | NAGALAND | 797104 | - | Rejected-Technical Not fulfilled the NIT criteria |
Tender Value
₹96 L
EMD Value
₹1.7 L
Closing Date
19 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col N K Chaudhary
HQ 137 Wks Engr PIN 914137 c/o 99 APO
SPL REPAIR FOR REPLACEMENT OF EXISTING CI WATER SUPPLY PIPE LINES INTO DI PIPE LINES AND ITS ALLIED WORKS AT ZAKHAMA MILITARY STATION
2024_MES_639044_2
8878/E8
Open Tender
Civil Works
Item Rate
180 days
Zakhama
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
AGE (I) Zakhama
₹1.7 L
Yes
7 Jun 2024
28 Mar 2024
26 Apr 2024
28 Mar 2024
19 Apr 2024
5 Apr 2024
Amount
Excavation in trenches not exc 1.5 m in depth and not exc 1.5 m wide for taking out/laying CI/GI pipes and getting out in hard/dense soil complete all as specified and as directed.
Removing excavated soil to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed.
Returning, filling in, of hard/dense soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed
Taking up unserviceable 100mm bore CI pipes from trenches/ floors of including necessary fittings and valves etc complete all as specified and as directed.
Material and labour for cutting the existing pipe line and insertion of required length of DI pipe of dia 100 mm bore with necessary jointing sockets, unions,elbows, bend, gaskets, flanges etc for making connection leakproof and necessary PCC for support of joints etc, complete as specified and as directed. Note:-Payment for PCC shall deemed to be included in the quated rate.
Supply, laying and jointing of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with Spigot & Socket end of Dia 100 mm, Class K-9 conforming to IS:8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with Sulphur Resistant Cement and external Metallic Zinc Coating with a finishing layer of Black Bitumen coating on external surfaces , duly ISI marked and making joints using EDPM/ nitrile rubber gaskets in trenches/under road/surface/ UG etc. complete all as specified and directed. Rates are inclusive of EPDM rubber gaskets. Note : Excavation and earth work will be paid seperately.
Supply, laying and jointing of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with Flange end (WELDED) of Dia 100 mm, Class K-9 conforming to IS: 8329/2000 with inside cement mortar lining and outside finishing layer of Black Bitumen duly ISI marked and making joints using EDPM/ nitrile rubber gaskets in trenches/under road/surface/ UG etc. complete all as specified and directed. Rates are inclusive of EPDM rubber gaskets. Note : Excavation and earth work will be paid seperately
Supply and fixing Specials for Spigot and socketed DI pipes as per IS 9523/2000, class K-12, PN-10, inside cement mortar lining with internal zinc mettalic coating and external black biuminous coating for replacing the damaged /unsv CI/GI fittings ,bends(any type any radius/angle) straight,bend,increasing or decreasing double sockets) Tee pieces single branch, cross(all sockets and spigot collars etc) for the 80 to 200 mm dia of pipes complete all as specified and as directed.
Supply and fixing Specials for Flanged DI pipes as per IS 9523/2000, class K-12, PN-10, inside cement mortar lining with internal zinc mettalic coating and external black biuminous coating for replacing the damaged /unsv CI/GI fittings ,bends(any type any radius/angle) straight,bend,increasing or decreasing double sockets) Tee pieces single branch, cross(all sockets and spigot collars etc) for the 80 to 200 mm dia of pipes complete all as specified and as directed.
Material and labour CI Double Orifice Kinetic Air Valve, Rubber Float, IS:14845, ISI Marked, Type DK, Flanged End with necessary connection with existing 100 mm size pipe ,Complete all as specified and directed.
Supply and fixing for 100 mm dia DI. resilient (soft) seated gate valve with pocket less body, ss stem (AISI 410), epdm coated di wedge 100% vaccum tight design with toroidal sealing rings and over 250 micron epoxy coating in PN16 designed to BS:5163/IS:14846 non-rising/rising stem type with hand wheel operation with flanges if required and connnection with existing pipeline with flanges or thread work etc including taking down old unserviceable one complete all as specified and as directed.
Supply and fix 100 mm dia DI non-return valve, flanged end in swing type design with EPDM door and with over 250 micron epoxy coating including all necessary items including taking down old unserviceable complete all as specified and as directed.
Material and labour for construction of valve pit of size 1.2 m x 1.2 m x 0.9 m (internal dimension) one brick thick wall, rendering 15 mm thick in CM 1:4 internally & externally (15cm depth below GL) finished even & smooth without using extra cement and applying three coat of white wash, mild steel sheet cover made of mild steel sheet, 3 mm thick and 40 mmx 40 mm x 6mm thick mild steel angle iron frame including locking arrangement,handle etc and painting with two coats of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces including demolition of existing brick masonry for valve pit complete all as specified and as directed.
Material and labour for Carry out Labortary analysis water sample test of treated/untreated drinking water in respect of Bacteriological, Chemical (Lead etc) and Physical property and the report to be submitted to department same as received from labortary. Note:- The Labortary test shall be carried out to RRL Jorhat/ Govt testing lab in Kohima/ Nagaland/any Govt college of nagaland and or as directed by Engr-in-Charge. Water sample to be collected in glass bottle duly sealed and stampted, bottle shall be provided by the contactor.complete all as specified and as directed.
Material and labour for cutting the existing hard standing/PCC/WBM road at a depth not less than 45cm and 25cm wide for passing of DI pipe returning filling in complete including finishing the surfaces by providing cement concrete (1:2:4) type B2 using 40mm grade stone aggregate) upto 20cm depth,finishing to a uniform smooth surface to match the existing surface complete all as specified and directed. Note:-Payment for PCC shall deemed to be included in the quoted rate.
Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Material and labour for Solution preparation tank fitted (plain bottom) with PVC agitator cap. 100 ltrs with lid, port hole, inlet / outlet / drain connection, level gauge etc and fitted with 900 RPM motor and PVC agitator with dozing pump Electromagnetic and Diaphragm Type with capacity of 05 ltrs / hrs @ 04 kg back pressure digital type, Lid shall have port hole for pouring chemicals and water when necessary and provision for mounting Decrine dosing pump on Lid/wall etc, complete all as specified and directed. (Note : Necessary pvc pipe with fittings incl in the quoted rate with cutting/threading/welding the existing pipe lines for connection)
Supply only Corrosion Inhibition and anti-scaling solution for drinking water treatment Appearance: Clear Liquid Viscosity @40 degree Celsius: 55-95cst Water content (max): 3.5 percent PH of 1% solution: 7.2 Color: Yellow to amber Flash Point (max): 52 degree Celsius Pour Point,degree Celsius (max): -18 Specific Gravity: 1.00-1.15 Storage temperature, degree Celsius Sailent Features: Non Toxic, Non Flammable, Eco-Friendly, Low foaming Shelf Life: 9 month Packaging Type: HDPE Carboys Packaging size: 25 liter OEM must possess the following valid certificates: FSSAI, ISO 9001, ISO 14001, ISO 45001 Note- Necessrary certificates to be submitted to the AGE(I) before procurement.
commercial enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .