PROVN OF ONE VVIP CHANGING ROOM AND FOUR NOS TOILET BLOCK AT GRC JABALPUR UNDER GE (P) NO. 1 JABALPUR

Excavating in trenches n.exc. 1.50m wide and n.exc. 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches n.exc. 1.50m wide and exc. 1.50m depth but n exc 3m depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for cutting Ductile iron / Cast iron water mains of size 150/ 100/80 mm dia pipes and reducing to required length for insertion of new tees/branches of pipe before laying including fixing, jointing and testing cast iron fittings such as bends any type radius and angle) tappers, collars, tee, Y junctions, plugs , caps and connected pieces of any other special required at site for the flanged /spigot and socket pipes up to 100 mm bore and connect and joint with existing line complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M&L for Cement concrete type D-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L Fly ash brick with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and fair with out using extra cement complete all as specified and directed.

M&L 5 mm thick cement plaster in CM 1:3 on ceiling /internal surfaces of fair faces of brick work or concrete surfaces with finished surfaces even and fair with out using extra cement complete all as specified and directed.

M&L for RCC (Design mix M-25) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,chajja and in shelves and the like complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately under respective item.

M & L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc. complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately under respective item.

M&L for RCC (Design mix M-25) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately under respective item.

M & L for RCC (Design mix M-25) in foundations, including, rafts, footings, foundation beams, bases for columns, etc , basement slab, under reamed piles and mass concrete complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately under respective item.

Use and waste formwork fair finish surface of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc.complete all as specified and directed.

Use and waste formwork fair finish surface of concrete formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns etc square or rectanguar complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter complete all as specified and directed.

Use and waste formwork to fair finish edges of concrete flats, treads, breaks in

floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacterer/authorized applicator of the manufactrrer incl taking down of existing roof treatment properly cleaning & drying the concrete surface complete all as specified and directed.

M & L for 10mm thick rendering on roof surface/concrete surface in CM 1:4 complete all as specified and directed.

M & L for applying a coat of oxidised bitumen based solvent primer @ 0.3kg/sqm complete all as specified and directed.

M & L for laying APP 3mm thick unrolled over the bitumen coated surface polymeric water proofing membrane Hyperplas standard wt not less than 3kg/sqm with 100mm over laps shall be sealed by flame as per manufactures instruction complete all as specified and directed.

M & L for applying two coat of bituminous base aluminium paint including preparation completely all as specified and directed.

M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm mtr on layers over the plastered wall after scrapping to prepare the surface even and smooth complete and sandind of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surfaces free from dust etc by skilled labour as per following steps:- (1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute. (2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI. (3) Allow 6-8 hrs time to dry the putty surfaces complete all as specified

Material & Labour for preparation of new external surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over a coat of plaster of paris putty .complete all as specified and as directed.

M&L for prepareation of new internal surfaces of wall and applying oil emulsion with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, over layers of putty of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats on new work., over a coat of primer and layers of putty all as specified and directed.

M&L for prepareation of new ceiling and applying oil emulsion with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, over layers of putty of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats on new work., over a coat of primer and layers of putty all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L two coat of synthetic enamel pinting over and including a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth complete all as specified and directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed.

M&L Granite (of any type) tiles 16 to 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed bed in CM 1:4 complete complete all as specified and directed.

S&F for wire gauge i.e. panel will be wire gauge in liew of double side prlam PVC sheet panel the wire gauge shell be wrapped on a additional square 8 mm solid tube and the tube shell be welded tomMS tube the wire gauge shell be stretched to tighten firmly Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) manufactured as per SSR Part I specifications and drawing. consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement manufactured as per SSR Part I specifications and drawings.

S & F Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 complete all as specified and directed.

S&F 150 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 200mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.Note: For uPVC frame and sash extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified. (Note :- Including 4mm Glass,SS wiremess 0.36mm dia and 20mm SS guard bar all other necessary items/fittings)

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing complete in square nexc 0.50sqm each complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F Rim latch of size 150mm with 2 levers, of brass body, polished bright, stove enamelled finish; with brass knob or lever handle etc complete all as specified and directed.

M&L in Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe Make :- Jaquar Cat Part No. URS-WHT-13253N or Equivalent make.

S&F Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make :

- Jaquar Cat Part No. ALD-565 or Equivalent make.

S&F in white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified. Make :- Jaquar Cat Part no. QPS-WHT-7151PM or Equivalent make

S&F in cascade duel flush one peace inbuilt flushing cistern vitreous china wash down water closet pan padestel pattern white including soft seat cover, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified. Make :- Jaquar ITS-Cat Part No. WHT-15753NS250PPZ or Equivalent make

S&F 15 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors incl cutting chasing and making good complete all as specified and directed.

S&F 20 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors incl cutting chasing and making good complete all as specified and directed.

S&F 25 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F in vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap and make good to match with the existing surface of floor complete all as specified and directed.

S&F in Vitreous China, semi-pedestal pattern (Anglo-Indian Type) with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap and make good to match with the existing surface of floor all as specified and directed.

S&F PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed.

S & F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement Complete all as specified and directed.

S&F toughened glass 12mm thickas in hinged doors, partitions, automatic doors , stair case panels and similar work incl all necessary fittings, cutting to shape complete all as specified.

S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified.

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges including taking down the existing towel rail.

S&F Vitreous China wash basin, angle back, white, excluding taps, waste, chain and plug and porcelain stopper but including brackets including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified Make :- Jaquar CNS-WHT-801 and CNS-WHT-301 or Equivalent make

M&L PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .

S&F ovel type counter top Wash hand basin flat back 550x400mm vitreous china (white) including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified. Make :- Jaquar KUS-WHT-35935 or Equivalent make

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20 mm thick screed bed in CM 1:6 to recieve tiles complete all as specified and directed.

S&F Chromium plated toilet paper holder including fixing arrangement complete all as specified and directed. Make :- Jaquar ACN-1153S or Equivalent make

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10 mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed.

M & L Virified Ceramic tiles double charged (light shade)10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20 mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed.

M & L Virified Ceramic tiles double charged (light shade10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, but n exc 1.00 Sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 10mm thick backing coat in CM 1:4 to recieve tiles complete all as specified and directed.

M&L for Machine cut cudappah stone slab 30-35mm thick horizontal/ vertical partion over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F 15 mm dia pillar taps, cast copper alloy with capstan heads chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. Make :- Jaquar Cat Part No. QQT-7011 or Equivalent make.

S&F 15 mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make :- Jaquar Cat Part No. ALI-85037 or Equivalent make.

S&F 15 mm bore angle/ stop cock, cast copper alloy fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed. Make :- Jaquar Cat Part No . COP-057PM or Equivalent make.

S&F Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. Make :- Jaquar Cat Part No . FUS-29281 or Equivalent make.

S&F in Brass Chromium plated sink/basin mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. Make :- Jaquar Cat Part No . FLR-519N or Equivalent make.

S&F brass chromium plated overhead shower/Hand Shower incl all connected fittings ( squar/rectangular) with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed. Make :- Jaquar Cat Part No . HSH-1717/OHS-1639 or Equivalent make.

S&F brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed by Engineer in Charge. Make :- Jaquar Cat Part No.AQN-7711 or Equivalent make.

S&F 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) cowl any radius complete all as specified and directed.

S&F brass chromium plated towel ring 20mm dia, round type, fixed with CP brass screws including wooden/plastic beads complete all as specified and directed by Engineer in Charge. Make :- Jaquar Cat Part No . AQN-7721 or Equivalent make.

S&F in fancy type stainless steel draphery rods with brackets 25mm bore including stop roller lid and knobs etc cut to length as required of colour complete all as specified and directed.

S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and as directed

S&F in Chromium plated soap dish including fixing arrangement complete all as specified and directed. Make :- Jaquar Cat Part No.AKP-35731P or Equivalent make.

S&F in Soap Dispenser with glass bottle including fixing arrangement complete all as specified and directed. Make :- Jaquar Cat Part No.AKP-35731P or Equivalent make.

S&F for 75 mm dia PVC (SWR ) bends and radius complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in position including taking down existing water tank complete all as specified and directed.

S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed.

S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in for Cupboars/Wardrobe of Factory made single extruded WPC (Wood Polymer Composite) 18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread o

f flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed.

Supply and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work and reinforced with G.I. wire mesh complete all as specified and directed.

Material and labour GI frame work seamless ceiling comprising of GI perimeter channel of 00.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre intermediate channel 0.5mm thick having two equal flanges of 15mm each and wed of 45mm suspended from soffit at approx 900mm cemtre to cemtre with GI cleat amd stee; expasoion fasteners with and including ceiling section (not 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

Material and labour Moulding as in cornices ,picture rails and the like exc 6 and n. exc 13 cm complete all as specified and directed.

S & F powder coated (min thickness of powder coating 50 micorn) Aluminium door, window,ventilator frame,Louvers with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and directed.

Returning filling in incl spreading levelling watering and well rammmed in layers n exc 25cm complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4).complete all as specified and as directed.

M&L, 15mm thick rendering on any faces of stone, concrete or brick work in CM 1:4 surface finished even and fair complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.50m for soil complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Excavating in trenches in any type of soil , n exc 1.5 m wide and exc. 1.5 m in deep and n.exc 3.0m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out soil complete all as specified and as directed

Supplying and laying and jointing for (SN 8) DWCPE 180 mm (OD)/ 163 (ID) conforning to IS-16098:2013 part -I with and incl jointing materials complete complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

Supply and laying sand cushioning with dry and clean washed sand over and under the under ground cable in trenches, ducts for cable protection 150 mm below & 80 mm above the cable as protection of cable complete as specified & directed. Note : Punned thickness of sand shall be measured & paid.

Supplying and laying un reinforced precast concrete cable cover, class LV Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed.

Supply and laying & testing and commisioning LT underground cable 16 Sqmm x 4 core, 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed

M&L for cement concrete 1:2:4 type B1 (20 mm graded stone aggregate) as in coping including necessary form work complete complete all as specified and as directed.

M&L Precast cement concrete Type B-1 1:2:4 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and directed.

Supply laying and fixing GI tubing of following sizes medium grade ISI Marked with all necesary fittings laid in trenches complete all as spccified and directed.

(a) 40 mm dia

(b) 25 mm dia

(c) 20 mm dia

M&L for cement concrete type B2 , 1:2:4 using 40 mm gradded stone aggregate in surface channels and drains including necessary formwork complete all as specified and directed.

Dismantling existing valve chambers & Material and labour for construction of valve pit chambers of size 900 X 900 X 900 mm (internal dimensions) as under provided with 10 cm thick PCC 1:4:8 type D-2 as in foundation over 15 cm thick hard core, 23 cm thick brick walls built in cement mortar 1:4, 15 mm thick internal plaster including top of floor, externally upto 150 mm below GL in CM 1:3 finished even and smooth without using extra cement, 3.00 mm thick MS sheet cover with 40 X 40 X 6 mm MS angle frame fixed in PCC 1:2:4 type B1, 50 mm thick coping with 25 X 6 mm flat iron hold fasts, hinges, handles, locking arrangements and applying 2 coats of syntheric enamel paint over acoat of red oxide primer to all steel surfaces and 3 coats of white wash to internal surfaces of chamber including excavation and earth work in any type of soil and removing of surplus soil to a distance not exceeding 50 m complete all as specified and directed.

Supply and and fixing in replacement Gun metal/brass, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as spccified and directed of following sizes :-

(a) 50 mm bore

(b) 25 mm bore

(c) 20 mm bore