SPECIAL REPAIRS TO BLDG No 65 GWS BAY OF FEL AT MCEME UNDER GE MCEME SECUNDERABAD

Amount

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as spd and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mPa as in roof covering/cladding to wall, fixed with self tapping screws completed all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mPa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc completed all as specified.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n. exc 4 sqm each and romoving to store yard

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n. exc. 1.5 sqm and romoving to store yard

S&F factory made 100% teerite & borer proof, moisture proof, fire retardant, eco-friendly product made from 100% virgin PVC resin solid wood plastic composite (WPC) door frames of cross section 90x45 mm made from wood plastic composite (single extruded process) material having minimum density of 780 kg/cum, single rebate 30x10 mm to receive shutter of 28-30 mm thickness.

S&F of 28-30 mm thick factory made rigid WPC plain/pre laminated door shutter made with 100% solid PVC flush door shutter made from co-extruded three layer PVC foam sheet (single extruded) with density not less than 600 kg/cum, outer layer min. 1 mm thick shall be of rigid PVC with density not less than 1400 kg/cum.

S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21

S&F of extruded aluminium alloy handles fabricated type anodised 125mm

S&F of aluminium anodised barrel tower bolts of extruded section and fixed 150mm

S&F for for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded, etc complete all as spd and directed.

S&F for for Steel windows or ventilators, fixed type, with glazing bars, etc complete all as spd and directed.

M&L for 3 mm thick, figured glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane, etc completed all as specified.

S&F 4.8 mm thick float glass ordinary quality and glazing with wooden beads or oil putty in square exc. 0.50 Sqm in each pane complete.

S&F in repair for for Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type,but gear operated type with chain wheel and hand chain, thickness of laths in 1.25 mm etc complete all as spd and directed.

Ball bearing for rolling shutters, etc complete all as spd and directed.

Taking down of steel window shutters of any description n. exc. 1 Sqm each and re fixing into the same opening after welding, easing complete all as specified.

S&F of Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties complete all as specifed and directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, band including formed work complete all as specifed and directed.

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described over 10 cm in width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F MS butt hinges medium weight cold rolled of size 100mm complete all as directed.

S&F in repair MS butt hinges medium weight cold rolled of size 100mm complete all as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), cement concrete (un reinforced), etc complete all as spd and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, finished even and smooth with out using extra cement.

M&L for 40 mm thick, Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finishes, etc completed all as specified.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub bases, floors and pavings etc.,

Dismantling cast iron work of any description, etc complete all as specified and directed.

M&L for hardcore using broken stone or boulders n exc 63mm deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface at road cuttings

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store.

S&F 20 mm bore GI Tube, ‘Medium grade’ with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store

S&F 15 mm bore GI Tube, ‘Medium grade’ with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F sinks (matt finish) with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to pipe overall size 915x460 mm and bowl size 410x352x178 mm and PVC waste coupling 40 mm dia with check nut, complete all all as specified and directed. Make: Jayna Cat No. SBSD 05 or equivalent in Nirali, Franke, Neelkant, Diamond, Blue Star.

S&F in repairs vitreous China wash basin half pedestal, 500x400x185 mm size, white, including fixing accessories set, rack bolt and 32 mm dia bottle trap with waste coupling complete all as specified and as directed. Make: Parryware Cat No. C0460, C0316, C8302, T9911A1, T3201A1 or equivalent in Hindware, Neycer, Cera, Johnson.

S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) (EWC) white, including fixing bolts, plastic water closet seat, white, closed pattern, solid type with flat bottom and cover and mild steel chromium plated hinging device, & connection to P/S trap, including brackets, and flushing pipe 32 mm dia etc complete all as specified and as directed. Make: EWC and Flushing cistern - Parryware cat No. C 0297/78 and C 8094 (for WC & seat cover) or equivalent in Hindware, Neycer, Cera.

S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors etc.,, bore of pipes in 32mm, etc completed all as spd and directed.

S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors etc.,, bore of pipes in 40 mm, etc completed all as spd and directed.

S&F in repairs 15 mm bore Swan neck pillar taps, brass chromium plated, with left hand operating knob with 450 mm long braided hose complete all as specified and directed. Make: Essco No. MQT 510 KN or an equivalent series/model in Marc, Parryware, Neycer, Johnson, Hindware, Aluminium Udyog (Kunchal).

S&F in repairs 15 mm bore, bib tap with wall flange, long body, fancy type, brass chromium plated, with crutch handle, screwed down for iron pipe and fixed etc. complete all as specified. Make: Essco MQT 512KN or equivalent series/model in Marc, Johnson, Hindware, Parryware, Aluminium Udyog (Kunchal).

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

S&F 15mm dia brass Stop valves screwed down, high pressure, screwed both ends for iron pipe or for union.

S&F 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling old RCC tank of any capacity.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe.

S&F 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as in repairs

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests, connection to trap, and to flushing pipe, antisphonage pipe, etc. complete all as specified and directed. Make: Parryware cat No. C0117 or equivalent in Hindware, Neycer, Cera.

S&F in repair PVC valveless, 10 litre capacity, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle etc., complete all as specified and directed. Make: Parryware cat No. E8090/E8055 or equivalent in Hindware, Neycer, Cera.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundation.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6

M&L for cement mortar 1:4, flush pointing to squared rubble masonary coursed or uncoursed etc completed all as specified.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping/bed block including framed work complete all as specifed and directed.

S&F for PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specifed and directed.

Cutting holes into or through brick walls built in cement mortar for removing/refixing PVC/CI fittings and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, superficial area n exc 150 sq cm each

M&L for salt glazed stone ware gully traps square or rounded mouthed type 'P' of size 150x150 mm fixed in cement concrete complete in repairs

M&L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm dia SWG pipe.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .

M&L for screed bed or bedding layers of cement mortar 1:6, 15 mm thick for laying floor finishes all as specified and directed.

M&L for glazed digital coloured ceramic tiles in vertical surfaces 300x450x7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the colour of the tile all as specified and directed.

M&L for non skid digital coloured ceramic tiles 400x400x7 to 8 mm thick (min size) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tile complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed.

M&L for brickwork with fly ash bricks in CM 1:6 straight or curved on plan exc 6 m mean radius all as specified and directed.

Taking down of cement plaster on brick or stone walls, ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.,

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface on wall, finished even and smooth without using extra cement with water proofing compound Note : WPC will be measured and paid separately

M&L Rendering 10mm thick in CM 1:3 on brick work or concrete surface on ceiling, inclusding chiken wire mess fixing to existing slab steel complete finished even and smooth without using extra cement.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface on wall, finished even and smooth without using extra cement.

M&L for screed bed 10 mm thick (average thickness to maintain desired slope) in cement mortar CM 1:3 on roof concrete surfaces mixed with water proofing compound (WPC) @ 3% by weight of cement all as specified and directed. Note: WPC will be measured and paid separately.

M&L for priming plastered roof surfaces with solvent based bituminous primer @ 0.4 kg/sqm (min) solid content of 59% density 0.8 to 1.2 gm/cc and providing APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) laid on primed surface by forced application complete over and with 10 cm minimum lap, longitudinal strength not less than 700 N/5cm & transverse strength not lessthan 450 N/5 cm (as per BSEN-12311), including application of two coats of solar reflective aluminium paint on both the directions (min 0.2 kg/sqm for two coats), complete all as directed and as specified and the whole process has to be done by manufacturer's authorised applicator and contractor has to submit material test certificates alongwith original invoice from the manufacturer.

Supply only integral water proofing compound complete all as specified. Note: i) For the purpose of guarantee and security deposit, the amounts quoted under SI item Nos 74-75 above shall be considered. ii) The whole process under SI item Nos 74-75 shall be recorded digitally by Contractor and AGE during execution and shall be submitted to GE in the form of CD at the time of claiming RAR .

Complete removal of wall finishes of wall surfaces and applying two coats of OBD on internal wall surfaces on 2.5mm thick wall care putty & after preparation priming plastered and other surfaces with alkali resistant primer.

Complete removal of finishes of ceiling surfaces and applying two coats of OBD on internal ceiling surfacesafter preparation priming plastered and other surfaces with alkali resistant primer.

Complete removal of existing treatment on walls and applying two coats of cement base paint over one coat of alkali resistantprimer compelete all as directed.

preparation of new wall surfaces of walls and applying two coats of cement base paint over one coat of alkali resistantprimer compelete all as directed.

M&L for two coats of cement based paint over a coat of cement primer on newly plastered surfaces of walls including preperation

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165, etc complete all as spd and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for 3 mm thick, figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, etc completed all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, etc completed all as specified.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M&L for Point wiring on surface conduit with 1.5 Sq mm copper conductor single core PVC insulated unsheathed 1100 V grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS, duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly as specified for one light point, ceiling fan, bell point controlled by One, one way switch 5/6 A SP, bell push.

All as per SI item No 88 above but one 3 pin 6 A switch socket point controlled by one switch on independent board.

All as per SI item No 88 above but one 3 pin 6 A socket point on same board with other switch.

All as per item No 88 above but for one 3/5 pin 5/15 Amp multipurpose socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board complete all as specified and directed.

S&F switch piano type, 6 A, 230 V AC, single pole, one way.

S&F bell push 5 Amps SP one way.

S&F Bell ding dong/buzzer type AC 230 Volts SP.

S&F switch socket combination 2/1 multipurpose 5 Amps flush type, 230 Volts all as specified.

S&F switch socket combination 2/1 multipurpose 3/5 pin 5/15 Amps flush type, 230 Volts all as specified.

S&F Ceiling rose, 3 terminal, PVC polycarbonate, insulated body ISI marked.

S&F angle lamp holder pin type PVC / Poly carbonate body with back plate all as directed.

S&F stepped type (5 steps) electronic fan regulator, AC, 230 V, flush type, suitable for 1200/1400 mm sweep complete all as specified and directed.

S&F sheet metal enclosure for MCB DB SPN 8 way, 240 Volts, single phase, double door with IP-43 protection suitable for 200 Amps rated bus bar complete all as specified and directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F MCB SPN, 240 Volts, 6-32 A, C curve, all as specified and directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F sheet metal enclosure vertical type MCCB DB TPN 4 Way with 200 Amps rated bus bar 415 Volts suitable for and including 125 Amps TP MCCB 16 kA as incommer complete al as specified. Note : MCB SP shall be measured and paid seperately.

S&F MCB SP 240 Volts "C" series, suitable for fixing on MCB DB's of capacity 5 to 32 Amps complete all as specified. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F MCB SP 240 Volts "C" series, suitable for fixing on MCB DB's of capacity 40 Amps complete all as specified. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F (on 2 Nos PVC round boxes) LED tube light fitting 1x20 W, 230 V including LED tube rod T8 1200 mm alongwith LED tube having system efficacy of 2100Lm and CCT-6500k, THD must be <15%, housing made of CRCA, LED life hours should not be less than 25k hours as per LM80 report, BIS mark is mandatory, supplier has to provide LM79/80 report, connecting upwith PVC copper conductor from ceiling rose complete all as specified and directed. Make: Philips Cat No. TMC 501 P 1xT LED 22W P 3241 & 20 W 865 T8 IND I, or equivalent in CG, Bajaj, Wipro

M&L for sub main wiring in concealed conduit including cutting, chasing, complete with 2 runs of 6 Sqmm single core HRFR, PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through in and including 25mm dia PVC conduit of medium grade and conduit accessories of suitable size fixed on walls / roofs / floors etc with provision of one run of 6 Sqmm HRFR, PVC insulated unsheathed cable with multistranded copper conductor as earth continuity., including dismantling old sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note: Three runs of 6 sq.mm copper cable and one run of PVC conduit and required conduit accessories shall be measured as one unit length.

S&F medium grade GI tubing of 40 mm dia for hanging the ceiling fan complete all as specified and as directed

M&L for Earthing complete with GI earth plate electrode 600x600x6 mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth wire 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'light grade', watering pipe 20mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, and connected to earth plate including necessary excavation & earthwork, PCC 1:3:6 type C-1 earth chamber, 40mm thick RCC cover 1:2:4 type B1 mix with 8mm dia TMT bars @ 100mm c/c both ways etc complete all as shown in electrical Plate No.3 connected to earthing test point, complete including testing on completion all as speciified and as directed. Note: Quoted rate shall deemed to include the cost of excavation and earth work in any type of soil.

Supply, lay, test and commissioning ISI marked XLPE insulated, screened, armoured, electric power cables (heavy duty) with aluminium conductor, 1100 Volts, grade cross sectional area 35 sq mm, 3.5 core complete all as specified and as directed.

Supply and spread approved dry river sand/M sand for cable laying /foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as directed. Note:- Punned thickness will be measured for payment purpose

Supply & Lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40 mm (ISI marked)

S&F sheet metal enclosure with 2 pole and earth metal plug & Socket including 20A SP MCB "C" series complete including taking down unserviceable enclosure all as directed. .

S&F highbay LED luminair, with presssure die cast aluminium housing of capacity not lessthan 80W, with all accessories including necessary electrical connection complete Make : Philips Model No. BY 225P LED 100S CWWB PSU or equivalent model of Wipro, Bajaj, CG.

S&F 20 W high efficient LED Street light fixture (as security light) with aluminium pressure die cast housing for long life, system efficiency ≥120 lm/W, system Lumens 3000 lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP65 protection, IK07, in built electronic driver with 4 kV surge protection has features of constant current with low/over Voltage protection with phase to phase 440 V protection for 8 Hrs, duly wired up to terminal block, surge protection in 4 kV, driver efficiency >88%, power factor > 0.95, THD <10% LED Make : Nichia/ Cree/ Osram/ Lumiled, colour rendering index CRI >70, temp range 0 to 45 degree centigrade, CCT 5700k-6500K, LED life 50000 burning hrs (min) as per L70 B50, photo biological safety report as per IEC 62471 & electrical insulation class 1, Voltage range 110-270 V AC and safety on low Voltage/high Voltage. LM79 & LM 80 certification. BIS R No. is mandatory for LED light fixtures/drivers and fixture shall be fitted to GI bracket 40 mm dia, light grade, min 1.5 m length, bent to shape required as per site and quoted rate is deemed to be included pron of GI pipe with brackets, nuts and bolts. Make:- Philips model No. BRP042 LED 19 CW MR S1 PSU GR or equivalent model of Wipro, Bajaj, CG

S&F exhaust fan 230 mm sweep, iron body heavy duty single phase 50 Hz, 1400 rpm AC with louver and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.019, 3 core from ceiling rose to connection of exhaust fan complete all as specified.

S&F 1200mm sweep, energy efficient ceiling fan with blades and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.019, 3 core from ceiling rose to connection of ceiling fan complete all as specified.

SHAH ENTERPRISES

Sri Associates

SAI RUPA CONSTRUCTIONS

M/s GM Constructions

Srinivasa Consructions

M/S B.SHRAVAN KUMAR

BHATNAGAR ASSOCIATES

BUILDWEL