SPL REPAIR REPLACEMENT OF EARTHING OF LT PANEL OTHER CONNECTED ITEMS OF E M INSTALLATIONS R O AVN EQPTS 162 MH OTHER SENSITIVE LOCATIONS ETC INCLUDING POCKET AREA N PROVN OF SOAK WELL SEPTIC TANK NEAR BLDG P07 N T20 AT OUTER POCKET UNDER GE DINJAN

Amount

Excavating over area n.exc 1.5 m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft/loose soil complete all as specified and as directed.

Excavating over area exc 1.5 m and n.exc 3 m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing Excavated material not exceeding 500M and n.exc 1.5 Km and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M&L for PCC 1:4:8 Type D2 (40 mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in C:M 1:6 , complete all as specified and directed.

M & L brick work with sub class -B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4. all as specified and directed

M&L for Providing, cement concrete 1:2:4 B0 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, copings etc complete all as specified and directed

M&L for rendering 20 mm thick on fair faces of external wall of brick work or stone surfaces in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed

M&L for Cement concrete type 1:2:4 B1 (40 mm graded aggregate) in surface channels and drains complete all as specified and as directed.

M&L for Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm graded aggregate) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed.

Use and waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter of flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waster formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished flat surface of concrete complete all as specified and as directed.

M&L for Providing precast cement concrete manhole covers, Type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 complete all as specified and as directed

M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and as directed.

Use and waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished flat surface of concrete complete all as specified and as directed.

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Columns, pillars, piers, posts and struts complete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete complete all as specified and as directed.

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Beams, cantilevers, bressumm?ers, lintels over 1.5m span complete all as specified and as directed.

M&L for loose filling with broken bats of gauge 80 mm to 150 mm in graded in soakage pits, soakage wells complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed

M&L for cement concrete 1:4:8 type D-2 bed to 110 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.

M&L for hard core of broken stones of guage not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor, etc complete all as specified and as directed.

M&L for Chequered cement concrete tiles 20 cm x 20 cm x 25mm thick set jointed and pointed in neat cement slurry 1:4 in floors with white cement and pigment complete all as specified and as directed.

M & L in repair for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire of size 04 mm earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 20mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI wire upto 10m including testing consider in this item). Note : Testing of each earthing should be done on presenece of JE E/M as per IS : 3043 and result should be satisfactory as per IE rules 1956.

M & L in repair for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI earth strip of size 32 x 6 mm earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI strip upto 7.5m including testing consider in this item). Note : Testing of each earthing should be done on presenece of JE E/M as per IS : 3043 and result should be satisfactory as per IE rules 1956.

Supply and fix Chemical Earthing system of Tripod Advance chemical gel earthing system of 03 number of any UL Listed & CPRI Tested copperbonded rod shall be 10 feet long 17 mm dia 250 micron copper bonded steel rod surrounded with 3x50 Kg each or more quantity of resistance lowering grounding minerals, well interconnected with suitable copper strip to form a triangle shape (distance between the rods shall be the length of the rod. The electrode will be Ground enhancing compound which shall be Eco-frendly. Product Material- Copper bonded High Tensile low carbon steel solid Rod Copper purity is 99.9% Copper grade is as per IS 191 Copperbonded Rod with outer surface 254-micron copper bonding in shank area with Arch Welded clamp Rod Arc Duly Welded with Strip Size (175x50x5)mm Copper bonding with 70-micron Copper bonded Rod. Copperboned Rod Dia- 17 mm complete all as per specification and as directed. Note : Testing of each earthing should be done on presenece of JE E/M as per IS : 3043 and result should be satisfactory as per IE rules 1956.

M&L for Pit Chamber- Round Value Box:- Supply of Poly Plastic heavy duty U V resistant, weather proof environment friendly earth pit cover with cover of auto- locking facility with 2 knock-out openings are provided for the easy strips between the earth pits. At Top (Dia)- 162 mm At Bottom (Dia)- 242 mm Height - 230 mm Tested from NABL Lab in 9 Ton weight carrying capacity complete all as specified and directed and as directed.

M & L in repair for Earthing complete with Copper earth plate electrode of size 60x60cm 3.15 x mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to copper earth strip of size 20 x 3 mm earth lead by means of nuts, bolts, check nuts, washers of copper as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke , salt and Earth enhancing compound 50 kg in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( Copper strip upto 7.5m including testing consider in this item). Note : Testing of each earthing should be done on presenece of JE E/Mas per IS : 3043 and result should be satisfactory as per IE rules 1956.

Supply and lay earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to distribution board or any other indicated situation for loop earthing etc. as required 25x3mm aluminium strip complete by removing the roken/damaged ones complete all as specified and as directed

Supply and lay earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to distribution board or any other indicated situation for loop earthing etc. as required 20x3mm copper strip and connected by copper nut and bolts complete by removing the broken/damaged ones complete all as specified and as directed

Supply and lay earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to distribution board or any other indicated situation for loop earthing etc. as required 32x6mm galvanised iron strip complete by removing the broken/damaged ones complete all as specified and as directed

Supply and lay earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to distribution board or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete by removing the broken/damaged ones complete all as specified and as directed

Supply and fix GI tubing light grade 15 mm bore fixed on walls, floors,in ground etc for GI wire protection including dismantling of the unserviceable all as directed.

Supply & fix single pointed air termination Aluminium rod, 12 mm dia, 300 mm long complete all as specified and as directed.

M&L in replacement for test point terminal block made of gun metal or phophores bronze size 75x75x25mm, drilled and screwed including 3 Nos, 8 mm dia 25 mm long hex head screw complete all as specified and directed.

M&L in replacement of broken chambers with construction of PCC foundation with (1:2:4) type B-2 using 20 mm graded stone aggregate of size 300 x 300 x 40 mm internal dimentsions with necessry frame work to be embedded with MS Angle iron frame complete complete all as specified and directed.

Supply ,laying & testing in trenches / pole cable XLPE insulated screened PVC bedded galvanised steel strip or wire, armoured electric power cable (heavy duty) with stranded aluminium conductor 11000 volts earthed grade of cross sectioal area wth all fitting accessories size . 25 sqmm 3.5 core Complete all as specified and directed.

Discription all as per Ser item No. 50 here-in-before but size 16 sq mm 4 core Complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cable all as specified and directed at site.

Discription all as per Ser item No. 51 here-in-before but but depth exceeding 1.5 metre but n. exc 3.0 metre all as specified and directed

Returning, filling in including spreading, leveling, watering and well ramming excavated soft/loose soil in layers , all as specified and directed.

Removing excavated material surplus (soil ) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

M&L for sand cushioning to under ground cable using locally available fine clean dry river sand over,under ground UG cable laid in treches and gently punning to cushioning to cable complete all as directed.

Supplying and laying un-reinforced precast concrete cable cover, classClass LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

Material and labours for spray painting only external and internal surfaces of dimension n.exc 1.8 m x 1.4 m x 0.6 m to 1.0m x 0.9m x 0.6 m without taking down pannel accessoriesone and apply two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete including preparation of old surfaces of steel surfaces by scrapping, rubbing all as specified and directed.

Material and labours for panel reparing by welding/brazing etc making door to opening properly for any existing electrical panal all as specified and directed.

Material and labours for panel reparing by proving MS plates of thickness 3.15mm of different sizes for gap filling of panels and proving cable gland of different sizes for any existing electrical panal all as specified and directed. Note : Cable gland to be measured and paid seprately.

Material and labours for providing metal cable gland Nickel plated Brass suitable for cable of size upto 35 sqmm by opening existing cable and refixing the same from any existing electrical panal all as specified and directed. Note : This item is only for existing LT cables

Material and labours for providing metal cable gland Nickel plated Brass suitable for cable of size 50 sqmm to 70 sqmm by opening existing cable and refixing the same from any existing electrical panal all as specified and directed. Note : This item is only for existing LT cables

Material and labours for providing metal cable gland Nickel plated Brass suitable for cable of size 95 sqmm to 150 sqmm by opening existing cable and refixing the same from any existing electrical panal all as specified and directed. Note : This item is only for existing LT cables

Supply and fix aluminium lugs ISI marked suitable for 95-150 sqmm size complete all as specified and directed. Note : This item is only for existing LT cables

Supply and fix aluminium lugs ISI marked suitable for 35-70 sqmm size complete all as specified and directed. Note : This item is only for existing LT cables

Supply only for Aluminium lugs ISI marked suitable for 10-25 sqmm size complete all as specified and directed. Note : This item is only for existing LT cables

Supply and install microcontroller based Automatic Power Factor Correction (APFC) Panel for 3 Phase, 415 V & 50 Hz system of capacity 20 KVAR ( 03 steps of 1 x 10 + 2 x 5) with incoming MCCBs of suitable capacity as incomer with MPP-H capacitor. Panel shall CPRI approved fabricated out of 3.15mm thick PGI sheet totally enclosed. dust/ water and vermin proof mounted on angle iron frame duly painted with powder coated complete all as specified and directed.

Supply & fix single pointed air termination copper rod, 12 mm dia, 300 mm long all as specified and directed

Supply and fix steel tubular swaged poles type 410 SP-64 (12 Meter long) complete with CI base plate including painting (aluminium paint) over a coat of red primer , complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed for the poles and stay complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C1, (using 20mm graded stone aggregate) for coping of poles and stay including necessary form work complete all as specified and as directed.

Supply and fix 50 sqmm Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables Havells Single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volt Conforming to IS 694 including PVC conduit of 25 mm complete all as specified and directed.

S&F Tubes 50mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M H KHAN (BID ID -3437852)