Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹28.8 L+₹11,669 (0.41%)Rejected-Finance | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹58,000
Closing Date
21 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli Bangalore 560013
8662WELCOME MAITENANCE TO MD ACCN AND REPAIR WORKS INCLUDING PERIODICAL SERVICES IN PH AREA IN WEST AREA AT AF STN JALAHALLI UNDER GE M AF JALAHALLI BANGALORE
2022_MES_524559_1
8662/E8
Open Tender
Civil Works
Item Rate
333 days
Garrison Engineer M AF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT PUBLIC FUND ACCOUNT
₹58,000
19 Aug 2022
17 May 2022
23 Jun 2022
17 May 2022
21 Jun 2022
1 Jun 2022
17 May 2022 - 24 May 2022
60 days
Amount
Material and labour for Preparation of plastered old decorated surfaces of walls including cleaning by brooming down scrapping down smoke & moulds efflorescent salts,cleaning the drops in the floor/shutters after treatment and applying one coat of white wash on wall surfaces all as specified
Material and labour preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying One Coat of White Wash, complete all as specified and as directed.
Material and labour preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts, treading oil, greasy spots,cleaning the drops in the floor/shutters after treatment etc and applying One Coat of Distemper Oil Emulsion (as approved), complete all as specified and as directed.
Material and labour preparing New Plastered Surfaces of Walls by applying a Coat of Wall Care Putty including rubbing down with Sand Paper to obtain a smooth finish surface and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.
Material and labour complete removal of old decorated wall surfaces of any description ,cleaning the drops in the floor/shutters after treatment and applying two coat oil bound distemper over one coat interior primer and all as specfied and directed by Engg-in- Charge.
Material and labour for preperation of old painted surfaces of wood of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint incl cleaning the drops in the floor/shutters after treatment complete all as specified and directed.
Material and labour preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
Material and labour preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.
Material and labour preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of cement based paint of approved make and all as specified and directed.
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Material and labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc.
Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor.
Material and labour for non skid coloured joint free tiles 7 to 8 mm thick area of Each tile exceeding 0.06 Sqm but not exc 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
Material and labour Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick (Square/rectangular) area of Each tile exceedig 0.06 Sqm but not exceeding 0.11 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
Material and labour for ceramic coloured tiles of size 300x200mmx7mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the surface.
Material and labour Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick (Square/rectangular) area of Each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
All as per item No 18 but vertical surfaces incl 10 mm thick cement plaster in cm 1:4 complete all as specified and as directed.
Material and labour Non-skid Coloured Ceramic joint free Tiles 7.0 to 8.0mm thick in skirting/dado, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Material and labour for pre- polished granite slab machine cut 18 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones complete all as 'specified and as directed.
Dismantling boarding, any description, fixed in any position with nails
Material and labour for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work and all as specified and directed.
Supply and fixing 18/19 mm thick Block boards, grade 2 quality interior grade commercial type, fixed withscrews to timber frame work and all as specified and directed.
Material and labour for 2 class hardwood bull-nosed, fillets of size 3 to 6 sqcm in section splayed, champhered or rounded on one edge or face fixed with nails complete all as specified and as directed.
Supply and fixing 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised.
Supply and fixing Mortice Lock Vertical type, size 100mm, Mild Steel, 4-Lever and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing 40mm dia, brass cupboard knobs fixed with nut, screw and washer
Supply and fixing in repairs aluminium anodised hasp and staple , 125mm safety type hinge pin including bolt type.
Supply and fixing in repairs Al door cill fixed to door bottom complete, all as directed.
Supply and fixing 140 mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed
Supply and fixing in repairs MS peg stay 300 mm long enameled black for steel windows with hindged joints etc
Supply and fixing in repairs Aluminium Handles cast type anodised 150 mm long for steel windows/wooden shutters with necessary fittings
Supply and fixing Aluminium Handle 125mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed.
Supply and fixing Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.
Material and labour for servicing /easing steel windows shutters of size not exceeding 2 Sqm Each including cleaning scrapping hacking oiling replacing welding broken hinges making good disturbed portion painting all as specified as directed by Engr-in –charge
Supply and fix in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and all as specified and directed.
Material and labour Galvanised steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed
Material and labour Galvanised Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and Fixed-in-repairs, complete all as specified and as directed.
Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares/rectangle n.exc. 0.50 Sqm in Each pane including. Necessary new oil putty or with existing metal beadings complete.
All as per item No.41 here-in-before but glass pane exc. 0.5 Sqm in Each pane.
Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and , S/F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in Each pane and securing with new oil putty and providing and fixing new metal beadings complete.
Supply and fixing in repairs MS 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete
Supply and fixing in repairs Stainless Steel Curtain Rod 20mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and as directed.
Supply and fixing in repairs coloured PVC toilet cabinet of size 355x455x90mm with looking mirror in replacement of existing looking mirror/woodencabninet and repairing the disturbed surfaces to match with existing.
Supply and fixing Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing in repairs Stainless steel Plate rack 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete
Resecuring or easing and adjusting wooden shutters of any description area n.exc. 1 Sqm Each without taking down
Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm Each without taking down
Supply and fixing in repairs for 8 feet 4 pipes pulley operatoed cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes).
Supply and fixing Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing Stop valves, fancy type, chromium plated with long shank and cup(concealed type), screwed down, high pressure, with crutch or butterfly handle, Screwed both ends for iron pipe or for unions and fixed
Supply and fixing 15mm bore Brass CP angular stop cock with crutch or butterfly handle complete as fixed in repair.
Supply and fixing in repairs wall mixture incl three joints to steel pipes of 15 mm bore and plugging & screwing to walls and making good the disturbed surfaces of walls to match with existing surfaces all as directed
Supply and fixing in repairs Bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms)
Supply and fixing Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing in repair 15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms))
Supply and fixing in repair shower rose chromium plated 120 mm with or without swirel joints including fixing to steel pipe of 15 mm bore all as specified make.
Supply and fixing in repair 16 inches stainless steel shower shelves heavy duty embedded in the wall complete all as specified.
Supply and fixing Chromium Plated Shower Rose with Shower Arm 100mm, Swival Joint including fixing to Steel Pipe and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing in repairs viterous china wash down water closet (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified make.
Supply and fixing Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces, including jet connections and white seat cover ISI marked with hinging devices etc, and fixed-in-repairs, complete all as specified and as directed.
Supply and fixing Plastic Seat Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed.
Supply and fixing Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed.
Material and labour PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling,waste pipes etc all as specified and directed
Supply and fixing Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.
Supply and fixing Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing in repair waste coupling 32 mm dia of PTMT (half or full threaded) minium weight 45 gram for WHB & Sink
Supply and fixing in repair waste coupling 100 mm top dia of CP (half or full threaded) minium weight 140 gram.
Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.
Supply and fixing in repairs PVC flexible pipe (Connecter) 15 mm dia, 600 mm long with check nut and bolt with washer all as specified
Supply and fixing in repairs grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).
Supply and fixing CP Grating Round 100mm dia jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.
Supply and fixing in repairs for CP brass health faucet alongwith flexible pipe and stay complete all as specified and directed. Make: Cera/Jaquar
Supply and fixing in repairs CP toilet paper holder fixed to walls with chromium plated (CP) brass screws
Supply and fixing in repairs CP soap dish fixed to wall with chromium plated brass screws , all as specified.
Dismantling of existing unserviceable water tank and removing, (Capacity 500 Ltr and n. exc. 1000 Ltr) complete all as specified
Supply and fixing rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 1000 Ltr capacity complete all as specified and directed
Supply and fixing rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 500 Ltr capacity complete all as specified and directed
Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.
Taking down chowkhats or Frame of any description (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.
Supply and fixing PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.
Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.
Supply and fixing Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.
Supply and fixing Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain Colour (Ivory Shade) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails of Mild Steel Frame shall be covered with Heat Moulded Wood Grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width Stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood Grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles & Rails with suitable 5.0mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mmx10mm (90°) and jointed together with Solvent Cement and fixing in the Frame at Site, complete all as specified and as directed.
Supply and fixing Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed.
Supply and fixing for 75mm long butt hinge.
Supply and fixing Alu anoldised barrel tower bolt 125 mm long.
Supply and fixing Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed.
Supply and fixing Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and as directed.
Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.
Refixing old Steel Tubing 15mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 94 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required/ordered at Sites), complete all as specified and as directed.
Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.
Refixing old Steel Tubing 20mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 97 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required/ordered at Sites), complete all as specified and as directed.
Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Material and labour for 100mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate) in pavings, path complete all as specified and directed by Engr in Charge.
Material and labour Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth using Extra Cement, complete all as specified and as directed.
Material and labour Cement Concrete 1:3:6 (20mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide upto total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and as directed.
Material and labour Vitirified Ceramic Tiles 9-10mm thick (Square/ Rectangular), Light shade, Polished, area of Each Tile not exc. 0.36 Square Metre in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.
Material and labour Vitirified Ceramic Tiles 9-10mm thick (Square/ Rectangular) Light shade, Polished, area of Each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.
Supply and fixing for Cement concrete chequered pre polished any coloured tiles 30cm x 30xm x20mm to25 mm thick, machine pressed; set, jointed and pointed in net coloured pigment in floors,incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes incl dismantling.
Material and labour Machine cut Cuddapah Stone Slab 20-25mm thick in cooking platform and in similar work, laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab and sides including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
Demolition Cement Concrete (Reinforced) of any description and in any position complete and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Material and labour Reinforced Cement Concrete 1:2:4 (20mm gradded stone aggre-gate) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Item.
Material and labour TMT Bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
Material and labour TMT Bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.
Material and labour Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Material and labour Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Stone Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
Material and labour Rendering (ceiling)5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.
Material and labour for 25 mm thk (average thickness) plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding cocrete on roof after thoroughly cleaning the roof with water and finishing the surface even and smoth when concrete is green complete all as directed.
Material and labour for water proofing treatment, 10mm thick rendering in CM 1:3 over padding with WPC, horizontal and vertical surfaces with applying of oil bound bituminous primer @0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4.00 kg/Sqm reinforced with non woven polyester matt weighing not less than 160 gms/Sqm including minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded as per detailed procedure on note No 6 of TD drawing No AFB/TD/260/06 sheet No 1/1(R) and applying a coat of blown grade @1.2 kg per Sqm hot bitumen 90/15 over and below the membrane finished with solar reflective bituminous aluminium paint/primer @0.1 Kg per Sqm all as specified and as directed including Removing complete existing treatment on roof surfaces surfaces by picking , sweeping clean and washig down with water to remove dust, etc. (Note:- WPC will be measured and paid separately)
Material and labour for taking down of existing sunken slab treatment from the sunken portion and removing of existing filling of sunken, cleaning the surfaces washing down with water and rubbish off the primises, cleaning and filling cracks with sealing compound, brushing neat cement [email protected]/Sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) (using 12.5mm graded stone aggregate) on sunken slab portion including filling of brick bats and finishing the top surfaces even and smooth without using extra cement . (b) Material and labour for two coat of acrylic cementitious water proofing coating (Dr FIXIT pidfin 2K manufactured by M/S Pidilite industries Ltd or equivalent) and followed by a overlay protective screed 15mm thick CM(1:3) alongwith liquid water proofing compound approved make on top surfaces of sunken slab after prepration as mentioned above method of application for acrylic cementitious water proofing coating and applying APP based polymeric membrane minimum weighing 4kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/Sqm) land on primed surface by forced application is followed as per manufacturers instruction complete all as specified and directed.
Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.
Supply and fixing Pressed Steel Frame for door of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.
Supply and fixing Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.
Supply and fixing for 35 mm thick 2nd class HW factory made panelled shutters with panel of 12 mm thick veneered commercial plywood kiln seasoned chemically treated with 15 x 6 mm edging all around the panels.
Material and labour Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.
Supply and fixing Aluminium Sliding Door Bolts having length of Bolt 300mm, plate type, stove enamelled black, with bright Bolt not less than 12mm dia with and including a minimum of 6 Bolts and Nuts, 4 on Bolt Plate and 2 on Staple Plate and fixed, complete all as specified and as directed.
Supply and fixing Mild Steel Sliding Door Bolts having length of Bolt 300mm, plate type, stove enamelled black, with bright Bolt not less than 12mm dia with and including a minimum of 6 Bolts and Nuts, 4 on Bolt Plate and 2 on Staple Plate and fixed-in-repairs, complete all as specified and as directed.
Supply and fixing mild Steel Butt Hinge 100mm long (weight not less than 80 Gram) and fixed, complete all as specified and as directed.
Supply and fixing Floor Door Stopper 150mm in size, Aluminum alloy Body and Tongue with Hard Drawn Steel Spring (weight not less than 90 Gram), complete all as specified and as directed.
Supply and fixing Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.
Supply and fixing Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed-in-repairs, complete all as specified and as directed.
Taking down Steel Window Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, complete all as specified and as directed.
Material and labour Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, steel peg stay, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under appropriate Item.
Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old Glazing Pins/Spring Clips, complete all as specified and as directed.
Supply and fixing Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.
Supply and fixing Sheet Glass 4.0mm thick, Frosted quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.
Dismantling Structural Steel or Mild Steel Work of any description not otherwise provided for, complete all as specified and as directed.
Material and labour Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.
Material and labour Running Welding Work exc. 2.5 Cm but not exc. 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/Guard Bars/ Gate/ Grills etc. Guard Bars in repairs, providing new Hinges to make the Steel Members Functional (as required) including painting the Steel Member to match the existing, complete all as specified and as directed.
Material and labour Complete Removal of existing Surface Treatment from Walls, applying a Coat of Wall Care Putty 1.5 minimum thick including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.
Material and labour preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of Weather Coat Exterior Paint with approved Tint as per manufacturer's instructions, complete all as specified and as directed.
Supply and fixing Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing Water Storage Lead (cover) suitable for water tanks of capacity 500 Litre or 1000 Litre capacity, including suitable hinging device complete all as specified and as directed.
Supply and fixing PVC Waste Pipe 32mm dia (bore) having 600mm long and fixed complete to Walls, Ceilings or in Floors, etc.and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing Bath Wall Mixer with 15mm bore (dia) Spout, Chromium Plated with long Bend Pipe for Over Head Shower including Flanges and fixing-in-repairs, complete all as specified and as directed.
Supply and fixing in repairs corner Glass Shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket for holding/hinging complete.
Supply and fixing Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete.
Supply and fixing PVC (SWR) Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) and fixed-in-repairs, complete all as specified and as directed.
Supply and fixing PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors/walls incl clamps and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors/walls incl clamps and Fixed-in-repairs, complete all as specified and as directed.
Demolition and bracking up drain pipes 100 mm dia (salt glazed ware, AC or PVC, reinforced concrete) set in cement mortar incl bend and dimension piece etc. Complete.
All as per item No 152 but 75 mmdia of pipes.
Supply and fixing in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.
Supply and fixing PVC (SWR) 75mm bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with Access Door, etc., jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.
Supply and fixing PVC (SWR) 110mm bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with Access Door, etc., jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.
Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets, , etc., Making Good disturbed surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.
Taking down/out unserviceable Sub-main Wiring from Batten/ Conduit/ PVC Casing Capping of any description, Making Good disturbed Portion/ Surfaces of Walls/ Floor/ Ceiling, etc. by using Cement Mortar 1:3 including providing Surface Treatment to match the Existing Treatment/ Finishes on Ground, complete all as specified and as directed.
Material and labour Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed cable 1100 volts grade, FRLS with multistranded copper conductor drawn through and including PVC Conduit medium grade 20 mm dia and all accessories in surface PVC conduit/existing concealed conduit/PVC casing-caping ets as per site requirement on walls / roofs / floors / ceiling etc. and including provision of 1.5 Sqmm copper cable as earth continuity conductor and connected to common earth dolly,existing/ new terminal box including fabricated steel terminal box made out of 1.60 mm thick MS sheet concealed in walls and suitable for modular type top cover for housing modular type fixtures such as switches, socket outlets, fan regulators etc., all as specified and as directed for One light point /fan point controlled by one switch. Make of wire-Havells/Finolex/Polycab. Make of coduit - Avon Plast/ Precision/Finolex.
All as per item No 159 here-in-before but for One ceiling fan point controlled by one switch and one regulator.
All as per item No 159 here-in-before but FOR One exhaust fan point controlled by one switch.
All as per item No 159 here-in-before but for One socket outlet 5 Amps on same board controlled by one switch.
All as per item No 159 here-in-before but for One socket outlet 5 Amps on independent board controlled by one switch.
All as per item No 159 here-in-before but for One light point controlled by two , two way switch.
All as per item No 159 here-in-before but for One call bell point controlled by one bell push.
All as per item No 159 here-in-before but using 2.5 Sqmm copper conductor multi stranded for power point.
Supply and fixing in repair modular switch 1 way 10 amps,1 module .
Supply and fixing in repair modular switch 1 way 16 amps,1 module
Supply and fixing in repair Modular switch 2 way 10 amps, 1 module
Supply and fixingin repair modular socket 6/10Amps,2/3 pin combined 2 module
Supply and fixing in repair modular socket 6/16 Amps,2/3 pin combined 2 module
Supply and fixing in repair fan regulator,120 W,2 module
Supply and fixing in repair Modular Bell push 6A 1 module
Supply and fixing in repair metal flush box 1 module
Supply and fixing in repair metal flush box 2 module
Supply and fixing in repair metal flush box 3 module
Supply and fixing in repair metal flush box 4 module
Supply and fixing in repair metal flush box 6 module
Supply and fixing in repair metal flush box 8 module
Supply and fixing in repair metal flush box 12 module
Supply and fixing in repair white cover plate with frame 1 module
Supply and fixing in repair white cover plate with frame 2 module
Supply and fixing in repair white cover plate with frame 3 module
Supply and fixing in repair white cover plate with frame 4 module
Supply and fixing in repair white cover plate with frame 6 module
Supply and fixing in repair white cover plate with frame 8 module
Supply and fixing in repair white cover plate with frame 12 module
Supply and fixing in repair Switch Piano Flush type, 6 Amp, Single Pole, 1-way, 230 Volt AC and connecting up, complete all as specified and as directed.
Supply and fixing in repair Bell Push, Flush type, 6 Amp, Single Pole, 230 Volt AC for operating Bell/ Buzzer and connecting up, complete all as specified and as directed.
Supply & fix in repair ceiling rose, 3 terminal ,PVC/polycarbonate body complete all as directed.
Supply and fixing in repair Switch Socket Combination 2-in-1, 3 Pin, 6/16 Amp, Flush type, Universal, 230 Volt AC and connecting up, complete all as specified and as directed.
Supply and fixing in repair Socket Outlet 2-in-1, 3 Pin, 6 Amp, Flush type, 230 Volt AC and connecting up complete all as specified and as directed.
Supply and fixing in repair Switch Socket Combination 2-in-1, 3 Pin, 6 Amp, Multi-Plug, Flush type, 230 Volt AC and connecting up complete all as specified and as directed.
Supply and fixing in repair Ceiling Fan Regulator Dimmar Switch type, 230 Volt AC, Rotary Stepped, Electronic type 120/280 Volt and connecting up, complete all as specified and as directed.
Supply and fixing in repair Bell Multi Music type 230 V.
Supply and fix Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge.Make- Philips/CG or equivalent.
Supply and fix Supply and fixing LED lights fitting 1 x 20 W, 4' long, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge.Make- Philips/CG or equivalent.
Supply and fixing round shape 18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge.Make CG/Bajaj/Philips.
Supply and fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with two core flexible copper conductor cable of suitable size including taking down old/unsv fittings all as specified and directed by Engr-in-charge.Make CG/Bajaj/Philips.
Supply and fix Bldg LED street light fitting 20 W, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having TOP Opening separate driver compaetment with IP-66 Protection and complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge.Make- Philips/CG or equivalent.
Supply and fixing Switch & socket and combined with twin USB Multistandard Socket type A, 3100mA , white including taking down any type of unsv switch socket complete all as specified and directed by Engr-in-charge.Make-Havells/Legrand/Anchor.
Supply & fix electronic LED FTL rod 4 with inbuilt driver, feet long, capacity 20 W comlete including taking down any type rod.
Material and labour for replacement of unsv LED driver up to 20 W matching with existing fitting complete all as specified and directed by Engr-in-charge.
Supply and fixing MCB Single Pole 6 to 32 Amp, 'C' Series 10 kA Breaking capacity, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed.
Supply and fixing MCB Single Pole & Neutral 40 Amp, 'C' Series 10 kA Breaking capacity, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed.
All as per item No 205 but 63 A.
Supply and fixing RCCB 40 A, DP, 30 mA, 240 V including taking down unsv/defective RCCB of any type complete all as specified and directed. Make-Schineder/ Siemens/ Legrand
All as per item No-207 but of size 63 A.
Supply and fixing Vertical , TPN DB 8 way, factory made out of steel sheet duly powder coated comrising with 200 amp , 415 Volt bus bar, neutral linh , erath bar and Din rail double door complete including taking down unsv TPN DB of any type and size. Make-Indo Asian/Legrand/ Schenider/Siemens.
Supply and fixing MCCB 100 A, 16 KA, 4P, 415 V , 50 Hz complete including taking down any type of unsv/defective MCCB all as specified and directed by Engr-in-charge. Make-Indo Asian/Legrand/ Schenider/Siemens.
Supply and fixing Switch Piano Flush type, 6 Amp, Single Pole, 1-way, 230 Volt AC and connecting up including Taking down/ out unserviceable Switch Piano, complete all as specified and as directed.
Supply and fixing Socket Outlet 2-in-1, 3 Pin, 6 Amp, Flush type, 230 Volt AC and connecting up including Taking down/out unserviceable Socket Outlet, complete all as specified and as directed.
Supply and fixing Switch Socket Combination 2-in-1, 3 Pin, 6 Amp, Multi-Plug, Flush type, 230 Volt AC and connecting up including Taking down/out unserviceable Switch Socket Combination, complete all as specified and as directed.
Supply and fixing Switch Socket Combination 2-in-1, 3 Pin, 6/16 Amp, Multi-Plug, Flush type, 230 Volt AC and connecting up including Taking down/out unserviceable Switch Socket Combination, complete all as specified and as directed.
Supply and fixing Ceiling Fan Regulator Dimmar Switch type, 230 Volt AC, Rotary Stepped, Electronic type 120/280 Volt and connecting up including Taking down/out unserviceable Fan Regulator, complete all as specified and as directed.
Supply & fix Boxes junctions, plastic, round, four terminals including Taking down/out unserviceable juction box of any type, complete all as specified and as directed..
Supply and fixing Bell, AC, 230 volts, single poleincluding taking down unsv bell of any type. Make-Anchor/ Leader/ Indoasian/ Universal/Legrand/Havells.
Supply & fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A. Make-Indo Asian/Legrand/ Schenider/Siemens.
Material and labour for wiring for circuit /sub main wiring with earth wire of size 2x 4.0Sqmm + 1 x 4.0 Sqmm of FRLS, PVC insulated copper conductor, single core cable in recessed , drawing in and including rigid PVC cunduit concelled complete all as specified and as directed.
Material and labour for wiring for circuit /sub main wiring with earth wire of size 2x 6.0Sqmm + 1 x 6.0 Sqmm of FRLS, PVC insulated copper conductor, single core cable in recessed , drawing in and including rigid PVC cunduit concelled complete all as specified and as directed.
Supply and fixing Distribution Board Sheet Metal Enclosure, Factory made fixed Flush with Wall inside the Nitches or Outside on Wall surface suitable for mounting Isolators & MCB's 240 Volts suitable rated Bus-bar capacity SPN 8-way, Double Door Front Openable and connecting up including Taking down/out unserviceable DB Sheet Metal Enclosure, complete all as specified and as directed. Make-Indo Asian/Legrand/ Schenider/Siemens.
All as per item No-221 but 12 Way.
Material and labour Taking down/Lowering unserviceable Water Heater of any capacity, any Make and type from any Height by disconnecting all Water and Electric Connections, Opening & Checking to ascertain the quantum of Defects and Repair works involves, Repairing/ Replacing of unserviceable Accessories, removing all rusted Nuts, Bolts, de-scaling Inner Tank & Inter Connection Assembly, cleaning thoroughly with diluted Acid, Brazing/Gas welding of Inter Connection Assembly, checking of Inner Tank to make Fully Leakeage Proof and Testing the same with Water Filling/Air Pressure, Re-fixing/ Re-mounting the same in Original Position and providing necessary Water/Electric Connection and Testing on Completion, complete all as specified and as directed.
Supply and fixing Heating Element 1.5/2.0 KW 230 Volt suitable for Water Heater (Geyser) of any capacity, any Make including Taking down/out unserviceable Heating Element, complete all as specified and as directed.
Supply and fixing Indication Lamp Rounded type 230 Volt suitable for Water Heater (Geyser) of any capacity, any Make including Taking down/out unserviceable Indication Lamp, complete all as specified and as directed.
Supply and fixing Pressure Release Valve Dead Weight type suitable for Water Heater (Geyser) of any capacity, any Make including Taking down/out unserviceable Pressure Release Valve, complete all as specified and as directed.
Supply and fixing Thermostate Switch with Thermal Setting 40 °C to 90 °C capacity and Relay 230 Volt including Taking down/out unserviceable Pressure Release Valve, complete all as specified and as directed.
Material and labour Repairs to Water Heater of any capacity and type by Taking out Unserviceable Water Tank (Inner Shell), brazing to leaking Portion or Patching Work as required with using Copper Plate 1.5mm thick including shaping to Original size, complete all as specified and as directed.
Supply and fixing PVC Pipe 15 mm bore (dia), 300 to 450 mm long as per site requirement, heavy duty for Inlet and Outlet Connections suitable for Water Heater (Geyser) including Taking down/out unserviceable PVC Pipe, complete all as specified and as directed.
Supply and fixing bib tap cast copper alloy screwed down with butter fly handle screwed both ends for iron pipe 15 mm bore chromium plated, fancy type.
Material and labour Taking down unserviceable Ceiling Fan, Exhaust Fan, Wall Mounted Fan, Air Circulator Fan of any Make & Size after disconnecting and removing to AGE E/M Store Yard for Opening & Checking to ascertain the quantum of Defects and Repair works involves, Re-hanging the same in Original Position after repaired and providing Electric Connection, complete all as specified and as directed.
Supply and fixing Ball Bearing (size as per existing one/ as approved) suitable for Ceiling Fan 1200/1400mm Sweep including Taking down/out unserviceable Ball Bearing, complete all as specified and as directed.Make : FAG/ NBC/ SKF
Supply and fixing Condenser 2.5 mfd suitable for Ceiling Fan & Wall Mounted Fan of any Make and Size including Taking down/out unserviceable Condenser, complete all as specified and as directed.
Supply and fixing Condenser 4.0 mfd suitable for Exhaust Fan/ Air Circulator Fan of any Make and Size including Taking down/out unserviceable Condenser, complete all as specified and as directed.
Supply and fixing Gun Metal Bush (size as per existing one/ as approved) suitable for Ceiling Fan of any Make and Size including Taking down/out unserviceable Bush, complete all as specified and as directed. MAKE : FAG/ NBC/ SKF
Supply and fixing Mild Steel Down Rod 15mm nominal dia and 250mm to 450mm long, heavy duty, duly painted in matching Colour of Fan, necessary drilling, etc. for hanging of Ceiling Fan including Taking down/out unserviceable Down Rod, complete all as specified and as directed.
Supply and fixing Rubber Bush (Reel type) standard size and type duly fixed with suitable size Mild Steel Bolt, Nuts, etc. including Taking down/out unserviceable Rubber Bush, complete all as specified and as directed.
Material and labour Transporting Ceiling Fan 1200/1400 mm Sweep from AGE E/M Store Yard to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.
Material and labour Transporting Exhaust Fan 250/ 300/ 350mm Sweep from AGE E/M Store Yard to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.
Supply and fixing PVC Stranded Copper Conductor Flexible Cable 1.5 Sqmm 2 Core for Electric Connection including Taking down unserviceable Cable, complete all as specified and as directed.
Supply and fixing PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.
SRI LAKSHMI VENKATESHWARA ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .