Construction of Boundary wall for Rajkiya Mahavidhalaya at Padiyapaar, Jaiswali Distt. Deoria

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttening, finishing and reinforcement with 1:1.5:3 (1 cernent: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). (Lintel/Beam)

Up to Plinth level

Up to Plinth level

Above Panth level

As in item 3 above but in_R.C.C. Rant

stone ballast (Using 1:1.5:3 Mix concrete)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding ali complete upto plinth level or above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common bumt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work it super-structure above plinth level including necessary cutting and moulding of brick work as required and also including honeycombod binck work in thickness of wall more than 12cms. (1:6 coment : coarse sand).

15 mm cement plaster in single coat on rough side of single or hait brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm; in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand,

Finishing wat's with water proofing cement paint of required shade : New work (Two or more coats oppbed @ 3.84 kg/10 sqm)

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1,7kg per square metre on damp proof course after cleaning the: surface with brushes and finally with apiece of cloth lightly soaked In kerosene oil.

Providing and fixing M.S. grills of required pattem in frames of windows etc. with M.S. Flats, square or round bars etc. all complete. Fixed lo Steel windows by welding

(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/stoel works.

(b) Painting with synthetic enamel paint of approved brand and manufacture to give an event shade: Two or more coals on new work

Centering and shuttering including strutting, propping etc, and removal of form for :

Lintels, bearna, plinth beams, girders, bressumers and cantilevers with water proof ply; 12 mm thick

Foundations, footings, bases of columns, etc for mass concrete,

Columns, Pillars, Piers, Abutments, Posts and Struts

Construction of 4.50 MTR WIDE M.S. GATE (1 Nos)

Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.

Providing and laying cement concrete in 1:4:8(1 Cement : 4 Coarce sand : 8graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. but in 1:4:8 in coarse sand

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

RCC Work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (TMT Bars) Fe-500

12 mm cement plaster in single coat on rough side of single or half brick wall for exterior plastering up to floor two level including brick wall level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive. in 1:4

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade : Two or more coats on new work over an under coat of suitableshade with ordinary paint of approved brand and manufacture