To Supply and Erection of Electrical material for year 2023-24 at Grampanchayat

Electrical Material

Supplying MS pole bracket for guarding/LT OH Line, fabricated from angle iron 50x50x6 mm and 550 mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp complete as per specification no. OH -PL/BKT

Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles)

Supplying Steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 6 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no. OH-PL/STP

Supplying Steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no. OH-PL/STP

Supplying Steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation (weight 147 kg) as per specification no. OH-PL/STP

Supplying Steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia with 4.5 x 4.5 x 3.65 mm. thickness (5 + 2.5 + 2.5 m) length respectively and total 10 m long with pole cap, base plate in provided foundation (weight 160 kg) as per specification no. OH-PL/STP

Supplying Steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation (weight 175 kg.) as per specification no. . OH-PL/STP

Supplying Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m long “B” grade G.I. pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC

Supplying TPMCB 40A to 63A in provided distribution board

Supplying DPMCB 40A to 63A, B- series (for lighting) in provided distribution board as per specification no. SWSWR/MCB

Supplying Insulated D.P. switch surface type/flush type 32A 240Vwith indicator lamp & fuse

Supplying Programmable Digital AlmanacTimer Microcontroller based with real time clock to operate on derived switching “ON” & switching “OFF” street light as per daily sunset and sunrise respectively

1.25 mm CRCA sheet metal enclosures with 20A.

Supplying PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 Kv

Supplying LED street light fitting suitable for 26w To 36w LED Street Light, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded aluminium complete per specification No FGODF/FLS2.

Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FGODF/FLS2.

Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG ODF/FLS-2.

Supplying LED street light fitting suitable for above 70W- 75 lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS2

Supplying LED street light fitting suitable for 90 w LED Street Light, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded aluminium complete per specification bajaj No FG-ODF/FLS-2.

Supplying and erecting LED street light fitting 100W, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2.

Supplying LED street light fitting 120 W, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2.

Supplying LED street light fitting 150 W, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

Supplying LED Flood light fitting of 120W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG ODF/FLS-2

2-5-17 Supplying LED Flood light fitting of 150W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

Supplying Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification No. FG-BKT/BPC(2-9-2)

Supplying and erecting street light Wall bracket made from 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB(2-9-3)

Supplying PVC armoured cable 4core 6sq mm

Supplying PVC armoured cable 4core 10 sq mm 7-1-15

Supplying PVC armoured cable 2core 10 sq mm

Supplying PVC armoured cable 2core 6 sq mm

Supplying PVC armoured cable 4core 16 sq mm

Supplying PVC armoured cable 4core 25 sq mm

Supplying XLPE armoured cable 3½ core 70 sq. mm. aluminium

Supplying XLPE armoured cable 3½ core 95 sq. mm. aluminium

Supplying XLPE armoured cable 3½ core 120 sq. mm. aluminium

Supplying SPMCB 6A to 32A, B- series (for lighting)

Supplying DPMCB 6 A to 32 A Bseries (for lighting)

Supplying TPMCB 6 A to 32Amp in provided distribution board

Supplying FPMCB 40A to 63A in provided distribution board

Supplying crimping type Aluminium lugs for cable upto 16 sq mm

Supplying crimping type Coper lugs for cable upto 1.5 To 6sq mm

Supplying two pole power contactor 250V 32A for time switch complete erected on wooden block/provided box, with necessary materials.

Supplying mains with2x1.5 sq.mm F.R copperPVC insulated wire

Supplying mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: GMA/BW

Supplying mains with ISI mark WP2 x 6 sq. mm. 1100 V. Grade aluminium PVC insulated PVC sheathed wires

Supplying mains with ISI mark WP2 x 2.5 sq mm. 1100 V. Grade aluminium PVC insulated PVC sheathed wires

Supplying mains with ISI mark WP2 x 10.00 sq mm. 1100 V. Grade aluminium PVC insulated PVC sheathed wires

25 Amp, 32 Amp Three Phase L/T Contactor

Insulation Tape

Water Proof Tape

Cable Joint Kit upto 25 Sq. MM Cable

Cable Joint Kit upto 35Sq. MM to 95 sq mm Cable

Cable Joint Kit upto 120Sq. MM to 185 sq mm Cable

Cement Street Light Pole Clamp with Nut Bolt

M.S. Street Light Pole Clamp with Nut Bolt

Servicing And Primary Maintenance of Street Light Pole 1 visit per month pole included and Also Call Basis. Checking All Wire Connections, NuT Bolt Tighting, Lugs Connection. Old Light Changing & Service wire conection Labour Works etc.

Supplying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes(DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Servicing And Primary Maintenance For Street Light Pole.

Light Poles painting in Silver Colour

26W LED Light To 100W LED Light Repairing

Old Pole Shifting, Rework and Foundation Work per Pole etc.

Supply and Installation of Mini Feeder Pillar with Stand

RCC Road Cheasling Charges with Tractor Breaker (1 Hours)

Tree Triming for Overhead Line

Supplying & erecting street light control panel outdoor type, for single phase 2 wire system having in built astronomical adjustable programmable timer with minimum 5 years battery backup, 2 pole contactor upto 60 A, with maintenance mode to switch ON street lights during time of repairs with energy consumption data recording for analysis and LCD display for energy monitoring with numeric key pad in provided box complete.

Supplying & erecting street light control panel outdoor type, for three phase 4 wire system having in built astronomical adjustable programmable timer with minimum 5 years battery backup, 4 pole contactor upto 60 A, with maintenance mode to switch ON street lights during time of repairs with energy consumption data recording for analysis and LCD display for energy monitoring with numeric key pad in provided box complete

Supplying, installing, testing and commissioning solar street light pole comprising of 9 W LED fitting, 12V 18Ah maintenance free lithium battery, min. 40 Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade GI pole of 6 m. height along with brackets, foundation, earthling and necessary accessories complete. Specification no. ESD-SOL-STL ( with 5 years warrantee )

4-3-13 Supplying, installing, testing and commissioning solar street light pole comprising of 12W x 2 nos. LED fittings, 12V min. 100Ah maintenance free lithium battery, min. 120Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade GI pole of 6 m. height along with brackets, foundation, earthling and necessary accessories complete. Specification no. ESDSOL-STL

Providing Rental basis Hydraulic Bucket Vehicle of Highth 9 Mtr. And Weight Capacity 200 Kg with Driver, Oprator and disel etc. for per day basis..

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no.OH-PL/OPL.

Providing & erecting 9 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 155 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Providing & erecting 10 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 175 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Providing & erecting 11 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 210 mm A/F, top 90 mm A/F on provided foundation as per specification no. OH-PL/OPL

Supplying and erecting Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor forautomatic switching of luminaries, 2 nos 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete

Supplying and erecting 12.5 m (clear height) High Mast (Top 150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 6 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification bajaj no. OH-PL/HM (excluding luminaries ).

Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)

Supplying and erecting mini feeder pillar triple pole with 200A FPMCCB as incomer and 2 outgoing circuits with HRC fuse base and cartridge of 100A consists of aluminium bus bar 500 V 200 A complete erected in 14 gauge CRCA sheet box with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation as per specification no.SW-SWR/MFP

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP

36 watt PCB

36 watt Driver

50-60 watt PCB

50-60 watt Driver

70 watt PCB

70 watt Driver

Highmast Repairing 100-200 watt

SERVICE WIRE 4 SQ.MM ISI MARK 2 CORE

SERVICE WIRE 6 SQ.MM ISI MARK 2 CORE

SERVICE WIRE 10 SQ.MM ISI MARK 2 CORE

FRP BOX OF SIZE 300 X200 X125 MM 2.7MM THICKNESS

12W LED BULB

14W LED BULB

18W LED BULB

16 AMP KITKAT FUSE

63 AMP KITKAT FUSE

Servie Reel

RETROFIT T8 LED 18/20 TUBE LIGHT

LAMP HOLDER CHINA CLAY

LAMP HOLDER (PENDENT)

Nut Bolt

GI Wire 10 swg

Pole errection

Conductor errection

V Cros Fixing

MCB Box Metal 4 way

150 watt PCB

120 watt Driver

150 watt PCB

150 watt Driver

200 watt PCB

200 watt Driver