Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 LAccepted-AOC | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹22.2 L+₹96,420.10 (4.55%)Rejected-Finance | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹22.4 L+₹1.2 L (5.80%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹23.0 L+₹1.8 L (8.46%)Rejected-Finance | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹23.1 L+₹1.9 L (9.04%)Rejected-Finance | L5 | Rejected-Finance HIGH RATE |
| Sl No | Description | Qty | Unit | SUN Enterprises L5 | SANDHYA ENTERPRISES L4 | Sarkar Enterprises L7 | Vikrant Deepak Mate L1 | G V HAGAWANE L2 | DARSHAN ENTERPRISES L6 | Sky Vision Construction L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for complete removal of existing treatment on wall by scrapping (nails, screws if any to be removed properly before sanding) and Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour complete all as specified and directed.
Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer (i) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 1,500 | Sqm | 10 ₹15,000 Lowest | 12 ₹18,000 | 10 ₹15,000 Lowest | 10 ₹15,000 Lowest | 20 ₹30,000 | 10 ₹15,000 Lowest | 25 ₹37,500 |
| 2.00 | M&L for water proof cement based putty @ 0.75 Kg (undiluted) per sq mtr. of average thickness 1 mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-
Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.
Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI
Step 3) Allow 6-8 hrs time to dry the putty surface. Step 4) Cracks of walls to be filled with its filling paste. 5) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 1,500 | Sqm | 25 ₹37,500 | 33 ₹49,500 | 20 ₹30,000 | 20 ₹30,000 | 25 ₹37,500 | 15 ₹22,500 Lowest | 20 ₹30,000 |
| 3.00 | Ditto all as item sl No 01 above but for Ceiling surface complete all as specified and as directed.
Note: (i) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 500 | Sqm | 10 ₹5,000 Lowest | 25 ₹12,500 | 20 ₹10,000 | 20 ₹10,000 | 20 ₹10,000 | 15 ₹7,500 | 20 ₹10,000 |
| 4.00 | Ditto all as item sl No 02 above but for Ceiling surface complete all as specified and as directed. Note: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 500 | Sqm | 25 ₹12,500 | 30 ₹15,000 | 25 ₹12,500 | 25 ₹12,500 | 30 ₹15,000 | 16 ₹8,000 Lowest | 47 ₹23,500 |
| 5.00 | M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
Note: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 4,000 | Sqm | 35 ₹1,40,000 | 40 ₹1,60,000 | 37 ₹1,48,000 | 25 ₹1,00,000 Lowest | 25 ₹1,00,000 Lowest | 25 ₹1,00,000 Lowest | 33 ₹1,32,000 |
| 6.00 | M&L for preparation of old painted surfaces and applying one coat of Oil bound distemper on wall complete all as specified and as directed.
Note: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 5,000 | Sqm | 30 ₹1,50,000 | 25 ₹1,25,000 | 20 ₹1,00,000 | 15 ₹75,000 Lowest | 20 ₹1,00,000 | 15 ₹75,000 Lowest | 27 ₹1,35,000 |
| 7.00 | M&L for preparation of old painted surfaces and applying one coat of Oil bound distemper on ceilling complete all as specified and as directed
Note: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 2,000 | Sqm | 30 ₹60,000 | 25 ₹50,000 | 35 ₹70,000 | 20 ₹40,000 | 20 ₹40,000 | 16 ₹32,000 Lowest | 24 ₹48,000 |
| 8.00 | M&L for preparing old surface with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior emulsion paint on old wall surfaces of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in one coat @ 0.75 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over preparing surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. etc complete all as directed.
Note for Item No 1 to 17
(a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer .
(b) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment as reqd
(c) The contractor shall submit MoU on non judicial stamp paper of Rs 100/- with any manufacturer listed in particular specification/list of manufacturer from which the contractor proposes to carry out the above work.
(d) Copy of MoU shall be uploaded with T-Bid (cover-1) failing which the technical bid shall be disqualified/rejected
. | 1,500 | Sqm | 50 ₹75,000 | 35 ₹52,500 | 55 ₹82,500 | 40 ₹60,000 | 45 ₹67,500 | 30 ₹45,000 Lowest | 45 ₹67,500 |
| 9.00 | M&L for Two coats water based premium acrylic smooth exterior emulsion paint on wall of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. | 8,000 | Sqm | 55 ₹4,40,000 | 40 ₹3,20,000 | 65 ₹5,20,000 | 50 ₹4,00,000 | 38 ₹3,04,000 Lowest | 60 ₹4,80,000 | 40 ₹3,20,000 |
| 10.00 | M & L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specifed and directed
Note: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd. | 2,000 | Sqm | 35 ₹70,000 | 29 ₹58,000 | 60 ₹1,20,000 | 55 ₹1,10,000 | 38 ₹76,000 | 25 ₹50,000 Lowest | 45 ₹90,000 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
2 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Khadakwasla
GE Khadakwasla
EXTERNAL PERIODICAL SERVICES FOR NOV 2025 POP IN ZONE A AREA AT NDA KHADAKWASLA
2025_MES_729529_1
8996/E8
Open Tender
Civil Works
Item Rate
90 days
GE Khadakwasla
As per tender documents
9 documents required · 9 mandatory
₹500
GE Khadakwasla
₹60,000
Yes
17 Oct 2025
4 Sept 2025
4 Oct 2025
4 Sept 2025
2 Oct 2025
20 Sept 2025
4 Sept 2025 - 20 Sept 2025
Amount
M&L for complete removal of existing treatment on wall by scrapping (nails, screws if any to be removed properly before sanding) and Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer (i) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd.
M&L for water proof cement based putty @ 0.75 Kg (undiluted) per sq mtr. of average thickness 1 mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. Step 4) Cracks of walls to be filled with its filling paste. 5) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd.
Ditto all as item sl No 01 above but for Ceiling surface complete all as specified and as directed. Note: (i) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd.
Ditto all as item sl No 02 above but for Ceiling surface complete all as specified and as directed. Note: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd.
M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd.
M&L for preparation of old painted surfaces and applying one coat of Oil bound distemper on wall complete all as specified and as directed. Note: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd.
M&L for preparation of old painted surfaces and applying one coat of Oil bound distemper on ceilling complete all as specified and as directed Note: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd.
M&L for preparing old surface with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior emulsion paint on old wall surfaces of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in one coat @ 0.75 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over preparing surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. etc complete all as directed. Note for Item No 1 to 17 (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer . (b) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment as reqd (c) The contractor shall submit MoU on non judicial stamp paper of Rs 100/- with any manufacturer listed in particular specification/list of manufacturer from which the contractor proposes to carry out the above work. (d) Copy of MoU shall be uploaded with T-Bid (cover-1) failing which the technical bid shall be disqualified/rejected .
M&L for Two coats water based premium acrylic smooth exterior emulsion paint on wall of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.
M & L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specifed and directed Note: Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd.
M & L for one coat of synthetic enamel paint with fully automatic airless spray machine including preparation of old painted surfaces of wood, wood based surfaces, AC sheet in ceiling exc 10 cm width or girth etc in ceiling incl filling of gaps between wooden planks with putty,POP all as specified and as directed.
M&L for preparing the old treated wooden surfaces of any description, with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and apply one or more coats of french polishing till the desired finish is obtained complete all as specified and as directed.
M&L for preparation of old treated wooden Surfaces of any description, over 10cm in width or girth, fill the gap or crack, hole with wood filler or POP, putty etc including cleaning and make the surface smooth and applying One coat Varnishing etc till the surface became fine glosy finish complete all as spd and as directed.
M & L for one coat of aluminium paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed
M & L for one coat of synthetic enamel paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed
M & L for one subsequent coat of cement based paint on wall surfaces incl preparation of old treated surface complete all as specified and directed.
M & L for one coat of cement based paint on Ceiling surfaces incl preparation of old treated surface complete all as specified and directed.
M&L for preparing surfaces of old roof tiles ( manglore tiles/taylor tiles) of pattern as specified and applying ONE coat of water based exterior paint with approved make all as specified and directed. Note: (i) Area measured flat, no addition shall be made for corrugations, offsets, etc (ii) Rates quoted are deemed to inclusive of scaffolding required upto height of 20mtr and safety equipment reqd.
M&L for preparing old surfaces of floor tiles and applying One coat of protective acrylic exterior emulsion paint of approved make ( Asian : Apex floor guard/ Indigo : Floor coat emulsion or equivalent ) as specified and directed. Note: Area measured flat, no addition shall be made for corrugations, offsets, etc
M & L for cleaning of external stone surface of walls/ steps at any height with pressure pump with clean water and by applying one part of cleaning solution of Asian or equivalent or other reputed brand as approved ) as per manufacturer's instructions. After thoroughly cleaning the surface the loose masonry joints to be properly pointed with (1;3) cement sand mortar mixed with W.P.C. complete all as specified and directed. Note: Necessary scafolding shall deemed to be included in the quoted rate. The scafolding shall be having ease of access for inspection purpose
M&L for preparation of old treated wall surfaces and applying one coat of luster paint complete all as specified and directed.
Ditto all as per item ser No 21 above but in ceiling surface etc , complete all as specified and directed
Taking down cement plaster on brick, stone walls, etc., incl racking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed
M&L for rendering 5mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed.
M&L for 10mm thick rendering in CM (1:6) on concrete wall surfaces at any height fnished even & smooth w/o using extra cement complete all as directed.
M&L for 15 mm thick rendering in CM (1:4) on concrete wall surfaces at any height fnished even & smooth w/o using extra cement complete all as directed.
M&L for surface preparation of new plasterd surface and applying two coats of oil bound distemper on ceilling over one coat of primer over applying 2 mm thick(avg) wall care putty to get the desired smooth finished etc, complete all as specified and directed.
M&L for surface preparation of new plasterd surface and applying two coats of oil bound distemper on walls over one coat of primer over applying 2 mm thick(avg) wall care putty to get the desired smooth finished etc, complete all as specified and directed.
M&L for surface preparation of new plasterd surface and applying two coats of cement base paint on wall over one coat of primer omplete all as specified and directed.
M & L for preparation of old concrete surfaces of wall and applying one coat of synthetic enamel paint on surfaces of concrete exc 10 cm width or girth complete all as specifed and directed.
Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superfical area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to distrubed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as directed .
Demolition of Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. Note : Size and shape of kerb stone as shown at site and directed
M & L for preparation of new concrete surfaces of wall and applying two coat of synthetic enamel paint on surfaces of concrete exc 10 cm width or girth complete all as specifed and directed.
Complete Removal of existing Auto line retro reflective thermoplast paint on concrete and bituminous surfaces by brushing with wire brushes for removing cacked mud etc complete all as specified and directed
M&L for providing and Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with thermoplastic paint of approved colour, completed all as specified and directed
S & F in repairs, Cats eye (Road studs), white / red colour reflective type, Metal Body, with both side reflectors and fixed with Nails and as well as epoxy resin as adhesive on bituminous surface, complete all as specified and directed
S & F in repairs solar stud with solar cell LED PCS, Ni-Cd Battery with aluminium main frame bottom frame aluminium, reflective in two opposite direction and fixed in road surface as per manufacturer instructionscomplete all as specified and directed .
S & F in repair 3M Vertical roadway reflective type delinator , one sided white and red ,1/CTN all weather visibility -2 Part constructed of highly engineered plastic that employs highest grade type 11 sheeting high impact strength, robust and light weight elegent eliptical shape, etc to be fixed in PCC 1:2:4 (300 mm X 300mm X 300 mm) type B1 Using 20 mm graded stone aggregate incl necessary excavation all as directed .
Ditto all as per item No. 39 above but except delinator etc complete all as specified and directed
S & F in repair of 3 mm thick aluminium composite pannel (ACP) board of any size fixed on both sides as per site requirement . ACP board fixed (incl removal of old board) on steel frame / grid with SS screw / rivet as directed. The board shall be sheated with high intensity retro reflective sheett of blue colour or as approved, computerised designed writting letter/figures in (Block, Roman,Italic style or in indian languages where required)/index hand (natural size)/arrows/stops/commas/ short lines /dashes/ hyphens /bracket, holograms etc where necessary shall be made high intensity reflective sheet with in white colour ladder, shape and sizes as reqd and approved by GE . letter not exc 200 Nos each face of the ACP Board. Each face to have a boarder line of 25mm wide white /red/golden or colour as specified high intensity retro reflective sheet/tape complete all as specified and directed.
Dismantling of singel layer mangalor pattern tiles in roofing complete all as specified and directed.
Dismantling of battans for tiles of any size including tilting fillets spacing exc. 15 cm complete all as specified and directed.
Dismantling timber scantling 40 Sqcm and over in section and at any position as in unframed work complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as speciifed and directed
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.
S/F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with cranked hook bolts in roofs, walls etc. complete all as specified and directed.
S/F for 0.63mm thick plain galvanised, mild steel sheeting as in ridge,hips,valley gutters ,drip and straight flashings class-2 complete all as specified and directed.
M&L for 2nd class H/W, 20 to 25 mm thick weather boarding clean sawn, rebated on thick edge to give 20 mm laps and fixed, complete all as specified and directed.
All as per above item No 49 but except boarding
M&L for providing roof tiles Mangalore pattern interlocking at side joints, laid dry in patches where required all as specified and directed
All as per above item No 51. but except tiles
M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 all as specified and directed
All as per item ser No 53 here In before but except ridge tiles
M/L for IInd class hard wood in scantling exc 40 Scm in area clean sawn for unframed work complete all as specified and directed.
M/L for IInd class hard wood plain fillets section exc 13 Sqcm and b not exc 25 Sqcm ,square,rectungular or tringular in section ,clean sawn ,secured with nails or brads for unframed work complete all as specified and directed.
Only fixing for IInd class hard wood in scantling clean sawn for unframed work
M/L for 2nd class hard wood clean sawn battens at 30 cm centre, sectional area exc 5 & n.exc 15 sqcm complete all as specified and directed.
All as per item No.58 above but except battens
M&L for preparation surfaces of wood and wood based materials,new or old ,of any description and girth ,not otherwise described and treated with two coat of creosote complete all as specified and directed..
M&L two coats of synthetic enamel painting to wooden surfaces over one coat of pink primer and including preparation of new surfaces complete all as specified and directed..
Dismantling stone slab & tiles of any description or thickness, in floor, aprons etc, laid bedded & pointed complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including cutting chasing in brick work and half rounding of marbel in front face of self including 15 mm screed bed in cement motar complete all as specified and directed.
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
G V HAGAWANE (BID ID -3433489)
Sky Vision Construction (BID ID -3433662)
SANDHYA ENTERPRISES (BID ID -3432945)
SUN Enterprises (BID ID -3431524)
DARSHAN ENTERPRISES (BID ID -3435258)
Sarkar Enterprises (BID ID -3433100)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .