Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹87.3 L
EMD Value
₹87,310
Closing Date
26 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engine Division, Koraput
HINDUSTAN AERONAUTICS LIMITED Engine Division, Koraput, Sunabeda- 763002
Supply and Installation of Lightening Arrestor, Surge Protection Devices for Public Buildings at HAL Township
8308
SNC/23ANCWC-1169/2
Works
Mig Complex- Engine Divn
₹1,120
₹87,310
26 Aug 2024
26 Jun 2024
26 Jun 2024
26 Aug 2024
AIR TERMINATION SYSTEM
Supply & Installation of 8mm dia Aluminum alloy Solid Round Conductor of material AlMgSi used in air termination and down conductor system. Cross sectional area of conductor should be 50 mm2. Test Parameter: a.Lightning impulse current of 100kA for 10/350 μs b.Electrical resistivity - 0.036 μΩm, Tensile strength - 120 to 240 MPa or N/mm2, Salt spray - No Sign of Corrosion. Tested as per IEC 62561-2.
Supply & Installation of UV resistance Nylon/PU Conductor Holder for Parapet wall for holding 8 mm dia Aluminium alloy round Conductor.
Supply & Installation of UV resistance Nylon/PU roof conductor holder for flat roof with concrete block for fixing 8 mm dia Aluminium alloy Solid Round Conductor in the terrace flat surface at every 1 mtr.
Supply & Installation of Stainless-steel Cross Connector for 8 mm dia Aluminium alloy round conductor & 10 mm Copper bonded conductor at cross junction. Test Parameter Salt Spray Test ( IEC 62561-1) - No sign of Corrosion
Supply & Installation of Plastic roof conductor holder for solid round aluminium horizontal air terminal above metal sheet (3M tape fixing).
Supply & Installation of 3M adhesive tape for fixing metal roof conductor holder.
Supply & Installation of Expansion Piece with connector to compensate the expansion and contraction of Solid Round Al. Conductor during temperature variations. Expansion piece should be consider at every 20 mtr length of straight horizontal air termination and connected at both the end with use of straight connector conductor. Test Parameter: Electrical Resistivity Test-0.036 μΩm Salt Spray Test - No Sign of Corrosion Tested as per IEC 62561-1
Supply & Installation of Aluminium Straight conductor connector for interconnecting 8mm Aluminium conductor to meets the requirement of IS/IEC 62305.Tested for Electrical, Mechanical and chemical as per IEC 62561.
Supply and installation of air termination rod of 3mtr length of material AlMgSi of diametre o 16/10 mm crimped on both the ends (Tappered Type). The rod shall be mounted with Stainless steel clamp and fixing accessories. Test Parameter: Mechanical Load Test for individual aluminium alloy rods - 120 to 280 N/mm2. Salt Spray Test-No sign of corrosion. Tested as per IEC 62561-1&2
Supply and installation of air termination rod of 3 mtr length of material AlMgSi of diametre o 16/10 mm crimped on both the ends (Tappered Type). The rod shall be mounted with supporting stone and fixing accessories. Test Parameter: Mechanical Load Test for individual aluminium alloy rods - 120 to 280 N/mm2. Salt Spray Test-No sign of corrosion. Tested as per IEC 62561-1&2.
Supply & Installation of air termination rod of 2 mtr length of material AlMgSi of diametre o 16/10 mm crimped on both the ends(Tappered Type). The rod shall be mounted on metal sheet roof with supporting structures & clamps made of Stainless steel. Accessories comprising of 1. VAT2 – Vertical Air Terminal 2000 mm Length2.AMRS-VAT400 – Adjustable Metal Roof Stand for VAT3.ITVAT -Interception Tip4.CPES 8 – Connecting point Test Parameter: Mechanical Load Test for individual aluminium alloy rods - 120 to 280 N/mm2. Salt Spray Test-No sign of corrosion. Tested as per IEC 62561-1&2.
Supply & Installation of SS-304 -Pipe Clamp , with connecting accessories for 8 or 10 Mm Dia Conductor , suitable for mounting the pipe dia of 168 mm
Supply of SS Folding clamp to meet the requirement of IS/IEC - 62305
DOWN CONDUCTOR SYSTEM
Supply & Installation of 8mm dia Aluminium alloy Solid Round Conductor of material AlMgSi used in air termination and down conductor system . Cross sectional area of conductor should be 50 mm2. Test Parameter: a. Lightning impulse current of 100kA for 10/350 μs b. Electrical resistivity - 0.036 μΩm, Tensile strength - 120 to 240 MPa or N/mm2, Salt spray - No Sign of Corrosion. Tested as per IEC 62561-2.
Supply & Installation of Stainless steel Conductor Holder for fixing the 8 mm dia Aluminium round conductor on the side wall . Test Parameter: Salt Spray Test - No Sign of Corrosion. Tested as per IEC 62561-1
Supply & Installation of Aluminium Straight conductor connector for interconnecting 8mm Aluminium conductor to meets the requirement of IS/IEC 62305.Tested for Electrical , Mechanical and chemical as per IEC 62561.
Supply & Installation of Lightning counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, Complies with IEC/EN 62561-6.
Supply of Stainless Steel Test Joint with enclosure to interconnect between 8 mm Al. round conductor to 10 mm copper bonded round conductor Test Parameter: Salt Spray Test for test joint plate -No sign of Corrosion. Tested as per IEC 62561-1
EARTHING SYSTEM
Supply & Installation of Rust resistant non corrosive 10 mm dia Copper bonded round conductor used for Earth termination inside the concrete and soil. Test parameter: Short circuit current test for copper bonded conductor: Test 6 kA ratings, as per cross sectional area for 1 sec(IS3043/IEEE80); Electrical Resistivity before & after salt mist spray test: 0.25μΩm max. Tensile Test 290 to 510 N/mm2. Adhesion no peel or crack & Bend test no separation of Cu, Cu Coating thickness min. 70μm. Tested as per IEC 62561-2.
Supply & Installation of Stainless steel Conductor Holder for fixing the 10 mm dia round conductor on the side wall. Test Parameter: Salt Spray Test - No Sign of Corrosion. Tested as per IEC 62561-1
Supply & Installation of Stainless steel Cross Connector for 8 mm dia Aluminium alloy round conductor & 10 mm Copper bonded conductor at cross junction. Test Parameter: Salt Spray Test ( IEC 62561-1) - No sign of Corrosion
Supply of stainless steel Straight Connector , tested for electrical resistivity, mechanical load to meet the requirement for IS/IEC - 62305 and IEC 62561-1&2.
Supply & Installation of UL Listed Maintenance Free Copper coated Earth rod of 3 mtr length having the dia of 20 mm with copper coating thickness of 250 microns. The rod has been tested for Dimension, Marking, Tensile Strength, Salt mist, coating thickness, Electrical resistivity test before and after corrosion test as per IEC 62561-2 & UL 467. a) Supply of earth enhancing mineral compound tested for leaching and TCLP with NABL accredited Lab as per IEC 62561-7 -25 kg. b) Supply of Universal Clamp made up of stainless steel for terminating cable / flat conductor with 2 nos of connecting point to connect with copper bonded ring conductor. c) Supply of GLASS FIBER PLASTIC- Earth Pit chamber, Used for maintenance free earthing d) inspection. Outer Size: 290(L) x 290(W) x 209(H) mm, Inner working Size: 212(L) x 212(W) x 153(H) mm, Load test conducted up to 60 kN (6116 kg),Class: Heavy duty, Meets the requirement for IS/IEC 62305 and IEC 62561-5, Tested as per IEC 62561-5.
Supply & installation of exothermic welding joints between ring earth & down conductors, suitable for 10mm dia copper bonded steel conductors.
SURGE PROTECTION DEVICE as per IS/IEC 62305-4 & NBC 2016
Supply & Installation of Din Rail SPD For Main incoming Panel (Three phase)
Supply & Installation of Din Rail SPD For Sub DB Panel (Three phase)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
1GeneralConditionsofContract.pdf
TENDER_DOCUMENT • 0.96 MB
ENIT.pdf
TENDER_DOCUMENT • 1.50 MB
BOQ-View.pdf
TENDER_DOCUMENT • 0.66 MB
FormatTurnoverExp.pdf
TENDER_DOCUMENT • 0.15 MB
Checklist.pdf
TENDER_DOCUMENT • 0.08 MB
EPSMandateFormat.pdf
TENDER_DOCUMENT • 0.12 MB
EBOQupload.xlsm
TENDER_DOCUMENT • 0.02 MB
UndertakingFormat.pdf
TENDER_DOCUMENT • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .