Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.2 LAdmitted-Finance 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | ₹25.2 L | L1 | Admitted-Finance |
| 2 | L2₹29.4 L+₹4.1 L (16.3%)Admitted-Finance RZ 18 260 WEST SAGARPUR NEAR MCD SCHOOL NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | ₹29.4 L+₹4.1 L (16.3%) | L2 | Admitted-Finance |
| 3 | L3₹31.0 L+₹5.7 L (22.7%)Admitted-Finance WZ 576 577 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | ₹31.0 L+₹5.7 L (22.7%) | L3 | Admitted-Finance |
| 4 | L4₹32.3 L+₹7.1 L (28.0%)Admitted-Finance | ₹32.3 L+₹7.1 L (28.0%) | L4 | Admitted-Finance |
| 5 | L5₹32.8 L+₹7.5 L (29.9%)Admitted-Finance 1 225 5 6 SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | ₹32.8 L+₹7.5 L (29.9%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Iconic Engineers L6 | A B K Enterprises L4 | SANJEEV ENTERPRISES L1 | Shiv Enterprises L3 | P S TRADERS L2 | M P TYAGI ENGINEERS AND CONTRACTORS L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply, installation, testing, and commissioning in renewal of centrifugal end suction pump set complete with electric motor and all necessary accessories, designed for a capacity of 220 m³/hr at a total head of 15 meters, with NPSH required not exceeding 2 meters and pump efficiency not less than 80%; the pump shall be coupled with a 415 V, 50 Hz, IE3 ,1450RPM efficiency class motor suitable for direct coupling, and the material of construction shall comprise cast iron casing, CF8M (SS316 equivalent) impeller, and SS410 shaft, including base plate, flexible coupling with guard, foundation bolts, and all standard accessories required for safe and efficient operation, along with submission of performance curves and technical datasheets for approval and compliance with relevant industry standard.Old seviceable pump and motor assembly to be deposited in MES Store
Note: Rate quoted by the contractor shall be incusive new foundation of pump complete pcc, brick work, cement work etc as per standard specification recommendation with also dismentling of old foundation complete all as specified and directed
Approved Make - Kirloskar/Grundfos/Ebara/Amrstrong | 2 | Each | 2,18,000 ₹4,36,000 | 2,65,000 ₹5,30,000 | 2,10,000 ₹4,20,000 Lowest | 2,70,000 ₹5,40,000 | 2,37,770 ₹4,75,540 | 6,99,999 ₹13,99,998 |
| 2.00 | Supply, installation, testing, and commissioning in renewal of a centrifugal end suction pump set and all necessary accessories, designed for a capacity of 110 m³/hr at a total head of 45 meters, with NPSH required not exceeding 2 meters and pump efficiency not less than 70%; the pump shall be coupled with a 415 V, 50 Hz, IE3 , 1450RPM efficiency class motor suitable for direct coupling, and the material of construction shall comprise cast iron casing, CF8M (SS316 equivalent) impeller, and SS410 shaft, including base plate, flexible coupling with guard, foundation bolts, and all standard accessories required for safe and efficient operation, along with submission of performance curves and technical datasheets for approval and compliance with relevant industry standard.Old serviceable pump to be deposited in MES store Note: Rate quoted by the contractor shall be incusive new foundation of pump complete pcc, brick work, cement work etc as per standard specification recommendation with also dismentling of old foundation complete all as specified and directed
Approved Make - Kirloskar/Grundfos/Ebara/Amrstrong | 3 | Each | 3,42,000 ₹10,26,000 | 4,00,000 ₹12,00,000 | 3,18,000 ₹9,54,000 | 4,05,000 ₹12,15,000 | 4,00,000 ₹12,00,000 | 2,99,999 ₹8,99,997 Lowest |
| 3.00 | Supply, installation, testing, and commissioning of a globe valve suitable for throttling and isolation service, with a nominal size of 250 mm, designed for reliable operation under specified service conditions; the valve shall be of robust construction with (cast iron) body, Flnged Ends to DIN 2533 PN 16 RF SS410/SS310 disc, and SS410 stem, with soft sealing components (rubber parts such as seat insert/packing) selected as per service suitability and operating conditions; the valve shall be designed to ensure tight shut-off, smooth operation, and long service life, and shall be complete with handwheel/actuation mechanism, bolting, gaskets, and all standard accessories; the valve shall conform to relevant international standards (such as ASME/API/BS as applicable), suitable for the specified pressure and temperature ratings, and shall be supplied with necessary test certificates, material test certificates (MTC), and inspection reports for approval.
Approved Make - KSB/L&T/BDK/Zoloto | 2 | Each | 70,000 ₹1,40,000 | 58,500 ₹1,17,000 | 50,000 ₹1,00,000 | 45,000 ₹90,000 | 76,000 ₹1,52,000 | 19,999 ₹39,998 Lowest |
| 4.00 | Supply, installation, testing, and commissioning of a globe valve suitable for throttling and isolation service, with a nominal size of 125 mm, designed for reliable operation under specified service conditions; the valve shall be of robust construction with (cast iron) body, Flnged Ends to DIN 2533 PN 16 RF SS410/SS310 disc, and SS410 stem, with soft sealing components (rubber parts such as seat insert/packing) selected as per service suitability and operating conditions; the valve shall be designed to ensure tight shut-off, smooth operation, and long service life, and shall be complete with handwheel/actuation mechanism, bolting, gaskets, and all standard accessories; the valve shall conform to relevant international standards (such as ASME/API/BS as applicable), suitable for the specified pressure and temperature ratings, and shall be supplied with necessary test certificates, material test certificates (MTC), and inspection reports for approval.
Approved Make - KSB/L&T/BDK/ZOLOTO | 3 | Each | 66,000 ₹1,98,000 | 19,500 ₹58,500 | 24,000 ₹72,000 | 15,000 ₹45,000 | 19,890 ₹59,670 | 14,999 ₹44,997 Lowest |
| 5.00 | Supply, installation, testing, and commissioning of a globe valve suitable for throttling and isolation service, with a nominal size of 100 mm, designed for reliable operation under specified service conditions; the valve shall be of robust construction with (cast iron) body, Flnged Ends to DIN 2533 PN 16 RF SS410/SS310 disc, and SS410 stem, with soft sealing components (rubber parts such as seat insert/packing) selected as per service suitability and operating conditions; the valve shall be designed to ensure tight shut-off, smooth operation, and long service life, and shall be complete with handwheel/actuation mechanism, bolting, gaskets, and all standard accessories; the valve shall conform to relevant international standards (such as ASME/API/BS as applicable), suitable for the specified pressure and temperature ratings, and shall be supplied with necessary test certificates, material test certificates (MTC), and inspection reports for approval.
Approved Make - KSB/L&T/BDK/KIRLOSKAR | 7 | Each | 53,500 ₹3,74,500 | 15,800 ₹1,10,600 | 15,000 ₹1,05,000 | 12,500 ₹87,500 | 13,500 ₹94,500 | 4,999 ₹34,993 Lowest |
| 6.00 | Supply, installation, testing, and commissioning of a 3-way control valve of nominal size 100 mm, suitable for mixing/diverting service in fluid systems, designed for smooth and precise flow control under specified operating conditions; the valve shall be of robust construction with body material in cast iron/WCB (as per application requirement), with stainless steel (SS304/SS316/SS410 CF8M) internal trim, including plug/disc and stem, and suitable soft sealing elements (PTFE/rubber) based on service conditions; the valve shall be provided with a compatible actuator (manual/electric/pneumatic as specified) ensuring reliable modulation and tight shut-off, and shall be complete with all standard accessories such as positioner (if actuated), flanges, fasteners, and gaskets; the valve shall be designed in accordance with relevant industry standards (ASME/API/BS) and suitable for the required pressure and temperature conditions, and shall be supplied with performance data, test certificates, and material test certificates for approval.
Approved Make - BDK/ Advance/KSB/KIRLOSKAR | 2 | Each | 25,500 ₹51,000 | 42,500 ₹85,000 | 27,000 ₹54,000 | 41,000 ₹82,000 | 24,000 ₹48,000 | 5,999 ₹11,998 Lowest |
| 7.00 | Supply, Laying, jointing and testing of under electric cable of size 3.5 core 95 sqmm XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor laid in trenches /duct /pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed. | 110 | RM | 700 ₹77,000 | 830 ₹91,300 | 648 ₹71,280 Lowest | 800 ₹88,000 | 1,240 ₹1,36,400 | 699 ₹76,890 |
| 8.00 | -Ditto- all as per srl item No. 7.00 here-in-before but 3.5 core 35 sqmm. | 30 | RM | 300 ₹9,000 | 360 ₹10,800 | 282 ₹8,460 Lowest | 350 ₹10,500 | 555 ₹16,650 | 299 ₹8,970 |
| 9.00 | M&L for taking out old MS pipes and Supplying & laying , testing & commissioning mild steel (Heavy) 'C' class pipe of dia 65 mm on exposed surface including welding works, connections with existing chiller/condenser water line, chiller/condenser pump, fabrication of bends, MS flange, tees, reducers, shoe, support ( brick masonry block & wooden support for underground / MS angle- clamp & wooden support for exposed surface ) along with priming coat of steel primer as per standard specification complete all as specified and directed.
Note:- (i) The rates quoted by the contractor shall deemed to include the cost of MS fittings required during laying of MS Pipes.
(ii) The Pipes of sizes 150 mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150 mm shall be heavy class of thickness min. 7mm as per IS: 3589
(iii) Necessary wall cutting and making the wall its good and its cost should be included in quoted rate.
(Make:- JINDAL/TATA/PRAKASH/SURYA) | 8 | RM | 800 ₹6,400 | 950 ₹7,600 | 700 ₹5,600 Lowest | 800 ₹6,400 | 700 ₹5,600 Lowest | 999 ₹7,992 |
| 10.00 | -Ditto- all as per srl item No. 9 here-in-before but of size 80 mm dia | 8 | RM | 1,030 ₹8,240 | 1,140 ₹9,120 | 950 ₹7,600 | 950 ₹7,600 | 900 ₹7,200 Lowest | 1,459 ₹11,672 |
Tender Value
₹35.2 L
EMD Value
₹70,500
Closing Date
26 Aug 2026, 6:00 pmClosed
HQ CWE (U) Delhi Cantt-110010
HQ CWE (U) Delhi Cantt-110010
REPAIR AND MAINTENANCE OF WATER PUMP OF AC PLANT AND OTHER CONNECTED WORKS UNDER GE(U) P AND M DELHI CANTT-10
2026_MES_780494_1
CWE(U)/D-13/2026-27
Open Tender
Civil Works
Works
180 days
HQ CWE (U) Delhi Cantt-110010
As per tender documents
9 documents required · 9 mandatory
₹500
GE (U) P and M
₹70,500
Yes
10 Sept 2026
24 Jul 2026
2 Sept 2026
24 Jul 2026
26 Aug 2026
14 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, installation, testing, and commissioning in renewal of centrifugal end suction pump set complete with electric motor and all necessary accessories, designed for a capacity of 220 m³/hr at a total head of 15 meters, with NPSH required not exceeding 2 meters and pump efficiency not less than 80%; the pump shall be coupled with a 415 V, 50 Hz, IE3 ,1450RPM efficiency class motor suitable for direct coupling, and the material of construction shall comprise cast iron casing, CF8M (SS316 equivalent) impeller, and SS410 shaft, including base plate, flexible coupling with guard, foundation bolts, and all standard accessories required for safe and efficient operation, along with submission of performance curves and technical datasheets for approval and compliance with relevant industry standard.Old seviceable pump and motor assembly to be deposited in MES Store
Note: Rate quoted by the contractor shall be incusive new foundation of pump complete pcc, brick work, cement work etc as per standard specification recommendation with also dismentling of old foundation complete all as specified and directed
Approved Make - Kirloskar/Grundfos/Ebara/Amrstrong | 2 | Each | - | - |
| 2 | Supply, installation, testing, and commissioning in renewal of a centrifugal end suction pump set and all necessary accessories, designed for a capacity of 110 m³/hr at a total head of 45 meters, with NPSH required not exceeding 2 meters and pump efficiency not less than 70%; the pump shall be coupled with a 415 V, 50 Hz, IE3 , 1450RPM efficiency class motor suitable for direct coupling, and the material of construction shall comprise cast iron casing, CF8M (SS316 equivalent) impeller, and SS410 shaft, including base plate, flexible coupling with guard, foundation bolts, and all standard accessories required for safe and efficient operation, along with submission of performance curves and technical datasheets for approval and compliance with relevant industry standard.Old serviceable pump to be deposited in MES store Note: Rate quoted by the contractor shall be incusive new foundation of pump complete pcc, brick work, cement work etc as per standard specification recommendation with also dismentling of old foundation complete all as specified and directed
Approved Make - Kirloskar/Grundfos/Ebara/Amrstrong | 3 | Each | - | - |
| 3 | Supply, installation, testing, and commissioning of a globe valve suitable for throttling and isolation service, with a nominal size of 250 mm, designed for reliable operation under specified service conditions; the valve shall be of robust construction with (cast iron) body, Flnged Ends to DIN 2533 PN 16 RF SS410/SS310 disc, and SS410 stem, with soft sealing components (rubber parts such as seat insert/packing) selected as per service suitability and operating conditions; the valve shall be designed to ensure tight shut-off, smooth operation, and long service life, and shall be complete with handwheel/actuation mechanism, bolting, gaskets, and all standard accessories; the valve shall conform to relevant international standards (such as ASME/API/BS as applicable), suitable for the specified pressure and temperature ratings, and shall be supplied with necessary test certificates, material test certificates (MTC), and inspection reports for approval.
Approved Make - KSB/L&T/BDK/Zoloto | 2 | Each | - | - |
| 4 | Supply, installation, testing, and commissioning of a globe valve suitable for throttling and isolation service, with a nominal size of 125 mm, designed for reliable operation under specified service conditions; the valve shall be of robust construction with (cast iron) body, Flnged Ends to DIN 2533 PN 16 RF SS410/SS310 disc, and SS410 stem, with soft sealing components (rubber parts such as seat insert/packing) selected as per service suitability and operating conditions; the valve shall be designed to ensure tight shut-off, smooth operation, and long service life, and shall be complete with handwheel/actuation mechanism, bolting, gaskets, and all standard accessories; the valve shall conform to relevant international standards (such as ASME/API/BS as applicable), suitable for the specified pressure and temperature ratings, and shall be supplied with necessary test certificates, material test certificates (MTC), and inspection reports for approval.
Approved Make - KSB/L&T/BDK/ZOLOTO | 3 | Each | - | - |
| 5 | Supply, installation, testing, and commissioning of a globe valve suitable for throttling and isolation service, with a nominal size of 100 mm, designed for reliable operation under specified service conditions; the valve shall be of robust construction with (cast iron) body, Flnged Ends to DIN 2533 PN 16 RF SS410/SS310 disc, and SS410 stem, with soft sealing components (rubber parts such as seat insert/packing) selected as per service suitability and operating conditions; the valve shall be designed to ensure tight shut-off, smooth operation, and long service life, and shall be complete with handwheel/actuation mechanism, bolting, gaskets, and all standard accessories; the valve shall conform to relevant international standards (such as ASME/API/BS as applicable), suitable for the specified pressure and temperature ratings, and shall be supplied with necessary test certificates, material test certificates (MTC), and inspection reports for approval.
Approved Make - KSB/L&T/BDK/KIRLOSKAR | 7 | Each | - | - |
| 6 | Supply, installation, testing, and commissioning of a 3-way control valve of nominal size 100 mm, suitable for mixing/diverting service in fluid systems, designed for smooth and precise flow control under specified operating conditions; the valve shall be of robust construction with body material in cast iron/WCB (as per application requirement), with stainless steel (SS304/SS316/SS410 CF8M) internal trim, including plug/disc and stem, and suitable soft sealing elements (PTFE/rubber) based on service conditions; the valve shall be provided with a compatible actuator (manual/electric/pneumatic as specified) ensuring reliable modulation and tight shut-off, and shall be complete with all standard accessories such as positioner (if actuated), flanges, fasteners, and gaskets; the valve shall be designed in accordance with relevant industry standards (ASME/API/BS) and suitable for the required pressure and temperature conditions, and shall be supplied with performance data, test certificates, and material test certificates for approval.
Approved Make - BDK/ Advance/KSB/KIRLOSKAR | 2 | Each | - | - |
| 7 | Supply, Laying, jointing and testing of under electric cable of size 3.5 core 95 sqmm XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor laid in trenches /duct /pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed. | 110 | RM | - | - |
| 8 | -Ditto- all as per srl item No. 7.00 here-in-before but 3.5 core 35 sqmm. | 30 | RM | - | - |
| 9 | M&L for taking out old MS pipes and Supplying & laying , testing & commissioning mild steel (Heavy) 'C' class pipe of dia 65 mm on exposed surface including welding works, connections with existing chiller/condenser water line, chiller/condenser pump, fabrication of bends, MS flange, tees, reducers, shoe, support ( brick masonry block & wooden support for underground / MS angle- clamp & wooden support for exposed surface ) along with priming coat of steel primer as per standard specification complete all as specified and directed.
Note:- (i) The rates quoted by the contractor shall deemed to include the cost of MS fittings required during laying of MS Pipes.
(ii) The Pipes of sizes 150 mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150 mm shall be heavy class of thickness min. 7mm as per IS: 3589
(iii) Necessary wall cutting and making the wall its good and its cost should be included in quoted rate.
(Make:- JINDAL/TATA/PRAKASH/SURYA) | 8 | RM | - | - |
| 10 | -Ditto- all as per srl item No. 9 here-in-before but of size 80 mm dia | 8 | RM | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_874283.xls
BOQ • 2.38 MB
D13TenderPages.pdf
Tender Documents • 1.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .