Repair and renovation of Grid Colony Udhampur.

Amount

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material .

Demolishing of mud phuska in terracing and disposal of material within 50 mtr lead .

Painting top of roofs with bitumen of approved quality at 17 kg per 10 Sqm impregnated with a cost of coarse sand at 60 Cu dm per 10 Sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. With residual type petroleum bitumen of penetration 80/100. incl. all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Providing & laying PVC Sheet over Bitumen for further protection from leakage (PVC Sheet 400 micron)

10 cm thick (average) mud phuska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay: 1 cow dung) and covered with flat tile bricks of class designation 1 00 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Regrading, terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope relaying plaster gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unservicable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) with in 50 mtr. Lead .

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (Stacks of cleaned bricks shall be measured) from brick work in cement mortar

Engaged labour for removing old cracked plaster from angular fitted (gola) and preparing the surface for reconstruction of angular fillet or golla.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design: In 75x75 mm deep chase.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Demolishing R.C.C work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material with all lead and lift complete 1:2:4 or richer mix.

Reinforced cement concrete work in walls, (any thickness) including attached pilasters, buttresses, plinth & string courses, fillets, columns pillars, piers, abutments, posts and struts, etc. upto floor 5 – level , excluding the cost of centering , shuttering , finishing and reinforcement. 1:1 ½ :3 (1 cement : 1 ½ coarse sand : 3 graded crushed stone aggregate 20 mm nominal size) incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Reinforcement for RCC works incl. straightening, cutting, bending, placing in position & binding all complete cold twisted bars. incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Repairs to plaster of thickness 12mm to 20 mm patches area 2.5 sqm & under including cutting the patch in proper shape raking out joints & preparing & plastering the surface of the wall complete including disposal rubbish to the dumping ground within 50 mtr lead with cement mortar 1:4 (1 cement : 4 coarse sand) incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 mtr lead for thickness of tiles 10 mm to 25 mm

Dismantling doors, windows and clere-story windows (Steel or wood) shutter including chowkhats, architrave, hold fasts etc. Complete and stacking within 50 mtrs. Lead of area of 3 Sqm. and below

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) 2nd class Deodar wood.

Providing 40x5 mm flat iron holdfast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts & wooden plugs & embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing & fixing glazed shutters for doors , windows and clerestory windows using 10 Kg / Sqm. (4 mm thick) float glass panes , incl. ISI marked M.S pressed butt hinges bright finished off required size with necessary screws 35 mm thick of second class Deodar wood.

Renewing glass panes with putty & nails wherever necessary float glass panes of thickness 5.5 mm

Proving & fixing 35 mm thick wire gauze shutters using galvanised M.S wire gauze of average width for aperture 1.4 mm both direction with wire of dia. 0.63mm for doors, windows & clerestory windows with hinges & necessary screws. Second class deodar wood.

Providing and fixing fly proof galvanised M.S wire gauge to windows and clerestory windows using galvanised M.S wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete with 2nd class deodar wood beading 62x19 mm.

Providing & fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed Butt hinges bright finished off required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer- in charge. Second class Kail wood. 35 mm thick.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows, clerestory windows, (Area of opening for panel inserts excluding portions inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick ply wood 5 ply, 9 mm thick decorative ply wood one side decorative veneer and commercial veneer on other face (type 1) confirming IS 1328 BWR type.

Providing & fixing panelling or panelling & glazing in panelled and glazed shutters for door, windows & clerestory windows (area of opening for panel inserts excl. portion inside grooves or rebates to be measured) panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle board 12 mm thick pre- laminated particle board with decorative lamination on both sides, Grade-I, Type IS: 12823 marked.

Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ; Size of tile 60x60 cm

Providing & fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming of IS: 13755 of NITCO, ORIENT, SOMANY , KAJARIA or equivalent make in colour such as White Ivory , Grey, Fume red brown laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) incl. pointing the joints with white cement & matching pigment etc. complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colour , shades except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm. Incl. pointing in white cement mixed with pigment of matching shade complete. incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface water thinable cement primer.

Distempering with oil bound washable distemper of Approved brand & manufacture to give an even shade over and including priming coat with cement primer. New work (two or more coats) over and including priming coat with cement primer

Finishing walls with water proofing cement paint of approved brand and manufacture to given an even shade new work (two or more coats applied @ 3.84 Kg/ 10 Sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard & soft wood).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, C.P brass hinges and rubber buffers, 10 ltr low level vitreous china flushing cistern with fittings, C.I/ M.S brackets 40 mm diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid with white vitreous china flushing cistern & C.P flush bend.

Providing and fixing Salem Stainless Steel AISI 304 (18/8) kitchen sink as per I.S:13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets cutting and making good the walls wherever required 470x420 mm bowl depth 178mm

Providing & fixing C.P. brass angle valve for basin mixer & geyser points of approved make conforming to IS: 8931. 15 mm nominal bore.

Providing & fixing C.P brass bib cock of approved quality confirming to IS 8931: 15 mm nominal bore. (Parry ware, Cera, etc).

Providing and fixing C.P brass long nose bib cock of approved quality confirming to IS standards and weighing not less than 810 grams 15 mm nominal bore.

Providing & fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china wash basin size 450x300 mm with single 15 mm C.P. brass pillar taps.

Providing & fixing P.V.C waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453 x 357mm (outer dimensions).

Providing & fixing C.P. Stop Cock (Concealed) of standard design and of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1.970 kg 15 mm nominal bore of standard back type.

Providing & fixing C.P brass wall mixer of approved quality brand and make

Providing & fixing CP brass sink mixer long nose pillar tap of approved brand and make

Providing & fixing soap case/ soap dish holder having length 138 mm and breadth 102 mm height 75 mm with concealed fittings

Providing & fixing swivalling showers 15 mm nominal bore, 45 mm long, 65 mm dia of approved brand

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangements of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplaste Star, Lotous or equivalent having valid ISI License). (1000 ltr capacity)

Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet sand cast iron S&S as per IS: 1729

Providing & fixing PTMT grating of approved quality and colour circular type 100 mm nominal dia

Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality colour waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing & fixing 600 x 120 x 5 mm glass shelf with edges round of supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.

Providing & fixing Jets for water closet Pan (Europian Type)

Providing and fixing 25 mm dia (heavy type) nickel plated M.S pipe curtion rods with nickel plated brackets.

Providing & fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper.

Construction brick masonary manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cm and 45cm deep including angle Iron frame 50x50x6mm and precast RCC slab cover with 40x40x5mm frame (2'-0" x 2'-0") with F.P.S bricks with class designation 75 & with crushed stone aggregate.

Providing & fixing G.I. pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall

15 mm dia nominal bore (Medium)

20 mm dia nominal bore (Medium)

Providing and fixing unplasticised PVC connections pipe with brass unions 45 cm length 15 mm nominal bore.

Providing & fixing wall face unplasticised- Rigid P.V.C rain water pipe confirming to I.S – 13592 type –A incl. jointing with seal ring confirming to I.S- 5382 leaving 10 mm gap for thermal expansion

110 mm dia

75 mm dia

ASHOK KUMAR GUPTA