REPAIRS TO VARIOUS TYPES OF WOODEN FURNITURE EXCEPT BED AND CHARPOY INCLUDING CANNING OF VARIOUS TYPES OF CHAIRS AND PAINTING/ POLISHING TO WOODEN FURNITURE AT MARRIED ACCN AND UNITS UNDER GE NAGROTA

Amount

(SCEDULE PART -I) 1). M& L for Removal of existing unserviceable/broken wooden part from furniture article carefully without disturbing the adjoining parts.Supply and fixing new parts as per given specification and drg after tightening the joints by pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. 2).Work will be executed inside Barrack Store yard of GE(Nagrota) and at various sites as per requirement. 3).All Timber shall be of 1st class fully seasoned hard teak wood free from knots and cracks. 4).Ply shall be BWR grade-AA of approved make/brand and shall confirm to IS-303. 5).All other material to be incorporate in the work shall be of latest IS standard specification. 6).Anti-termite and anti-bug treatment shall be done before polishing the wooden item. 7).Painting/polishing shall only be done with spary machine only.

SOFA SET 5 SEATER,(3+1+1) FD-281

Removing old ,supply and fixing new leg of size 70mmx35mmx515mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new arm of size 70mmx35mmx745mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new batten of size 50mmx20mmx585mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new front long rail of three seater size 100mmx35mmx1630mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new front long rail of single seater size 100mmx35mmx570mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Removing old ,supply and fixing new short rail of size 100mmx35mmx625mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Removing old ,supply and fixing new long bearer of size 40mmx40mmx1590mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Removing old ,supply and fixing new short bearer of size 40mmx40mmx530mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Removing old ,supply and fixing new rail to back frame of size 70mmx35mmx1590mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Taking out old pressed /torn cushions from each set and Supply of 40 density ,100mm thick PU foam cushion of size 520mmx560mmx100mm duly covered with inner linen cloth and best tapestry cloth not less than Rs 300 per metre and not less than 360 GSM of approved color and shade. Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting. Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard . Make of Foam 40 density-Kurlon/Sleepwell/U-foam Make of Tapestry cloth:- D'decor/Drone/Milestone/Asmara or as per approved sample

M& L for Scratching the entire wooden pallets of sofa with sand emery paper of various grit , filling the pores with wood filler to make good the surface,After prepartion of surface the entire sofa chair shall be polished in french finish in high gloss with spary machine only. Make of french polish-Asian paints/Berger paints

SOFA SET 4 SEATER,(1+1+1+1) FD-281

M& L for Removing old ,supply and fixing new legs of size 70mmx35mmx515mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Removing old,supply and fixing new arm of size 70mmx35mmx745mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Removing old ,supply and fixing new battens of size 50mmx20mmx585mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Removing old, supply and fixing new front rails of size 100mmx35mmx570mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

Removing old, supply and fixing new short rails of size 100mmx35mmx625mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L forRemoving old ,supply and fixing new bearer of size 40mmx40mmx530mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L forRemoving old ,supply and fixing new rail to back frame of size 70mmx35mmx530mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Taking out old pressed /torn cushions from each set and Supply of 40 density ,100mm thick foam cushion of size 520mmx560mmx100mm duly covered with best tapestry cloth not less than Rs 300 per metre and not less than 360 GSM of approved color and shade. Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting. Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard . Make of Foam 40 density-Kurlon/Sleepwell/U-foam Make of Tapestry cloth:- D'decor/Drone/Milestone/Asmara or as per approved sample

M& L for Scratching the entire wooden pallets of sofa with sand emery paper of various grit , filling the pores with wood filler to make good the surface,After prepartion of surface the entire sofa chair shall be polished in french finish in high gloss with spary machine only. Make of french polish-Asian paints/Berger paints

CHAIR EASY CUSHIONED (FD-358 )

M& L for Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

M& L forRemoving the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

M& L for Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

M& L for Removing the existing unserviceable seat from the chair ,Supply and fixing new seat made of 3mm thick ply over 75mm cushion shall be fixed and duly upholstered with best tapestry cloth not less than Rs 350 per metre and not less than 360 GSM of approved color and shade. complete polishing process as specified and as shown on drgs. Make of Foam 40 density-Kurlon/Sleepwell/U-foam Make of Tapestry cloth:- D'decor/Drone/Milestone/Asmara or as per approved sample

M& L for Removing the existing unserviceable back from the chair ,Supply and fixing new back made of 3mm thick ply over 75mm cushion shall be fixed and duly upholstered with best tapestry cloth not less than Rs 350 per metre and not less than 360 GSM of approved color and shade. complete polishing process as specified and as shown on drgs. Make of Foam 40 density-Kurlon/Sleepwell/U-foam Make of Tapestry cloth:- D'decor/Drone/Milestone/Asmara or as per approved sample

M& L for Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

TAPESTRY COVER FOR POLYURETHANE FOAM CUSHIONS FOR 5/4 SEATER(FD-281)

M& L for Taking out old torn/ faded cushion cover from old foam cushions and supply and fixing new cushion cover with inner lining cloth to the existing cushion made in size 520mmx560mmx100mm duly covered with best tapestry cloth not less than Rs 350 per metre and not less than 360 GSM of approved color and shade .Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting. Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard . Make of Foam 40 density-Kurlon/Sleepwell/U-foam Make of Tapestry cloth:- D'decor/Drone/Milestone/Asmara or as per approved sample

CHAIR DINING ,FD-279,262,228

M& L for Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

M& L for Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

M& L for Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

M& L for Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

M& L for Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR DINING JCO/OR ,FD/MAP-II/05

M& L for Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

M& L for Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

M& L for Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

M& L for Removing the existing unserviceable PVC seat ,supply and fixing new PVC seat 4mm thick after providing one wooden stiffener at centre of seat frame for support of PVC seat .The PVC seat shall got approved from GE before supply.The PVC seat shall be fied only after painting the chair. Make of seat - AMKO/Cello/Brite/Harmony

M& L for Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR EASY,FD-229,358 :-

M& L for Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

M& L for removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

M& L for Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

M& L for Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

M& L for Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

M& L for Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat and back shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

M& L for Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR WRITING,FD-261,280,250

M& L forRemoving the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

M& L for Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

M& L for Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

M& L for Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

M& L for Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

M& L for Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR VERANDAH:-, FD-256 ,259

M& L for Spot gas welding to broken parts/joints of chairs.

M& L for Removing of existing torn out/unserviceable plastic cane/niwar from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.The canning shall only be done after painting the chair.

M& L for Removing the old broken shoes of chairs and Supply and Fixing best quality new PVC shoes to the legs of chair.

M& L for Removing the existing unserviceable/broken PVC seat and back from the chair,supply and fixing new PVC seat and back 4mm thick to the chair verandah MAP after providing one flat iron of size 20mmx5mm in support of PVC seat at centre between two sides through proper welding .The PVC seat shall got approved from GE before supply.The PVC seat shall be fied only after painting the chair.

M& L for Painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.The chair frame shall be made smooth by applying metal putty whereever required.

CHAIR WOODEN BOTTOM W/O ARM, FD-225

M& L for Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

M& L for Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

M& L for Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

M& L forRemoving the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

M& L for Removing the existing unserviceable/broken seat of chair without disturbing the adjacent parts ,supply and fixing 6 mm thick one side teak face ply for seat .The seat ply shall be provided with 4mm dia holes 08 in nos at centre and shall be fixed with screws from top.

M& L for Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR DINING LONG BACK ,FD/E6/MAP/10 and FD/MAP-II/04

M& L for Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

M& L for Removing the old unserviceable Teak wood vertical stiffener and supply and fixing new Teak wood vertical stiffener of 1st class teak wood as per drg.

M& L for Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

M& L for Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

M& L for Removal the old unserviceable seat by unscrewing from bottom ,Supply and fixing new seat made of 40 density cool foam 75mm thick fixed on 12mm thick BWR plywood duly covered with best quality tapestry cloth of not less than Rs 350 per meters with standard workmanship using white muslin cloth at bottom.The tapestry cloth shall be fixed to bottom ply with pressure hydraulic stapler pins.The seat after upholstery shall be fixed within /over the wooden frame by using black gypsum screws from beneath through corner brackets.

M& L for Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

BIN LINEN MULTIPURPOSE,FD/E6/MAP/09

M& L for Removing old, S&F new top of size 1200mm x 450mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade as per drg.

M& L for Removing old, S&F new Back of size 1200mm x 675mm made out of 12mm thick BWR plywood fixed with sides and top with adhesive and neadless nails as per drg.

M& L for Removing old, S&F new Door Shutter of size 637mmx400mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick teak wood beading fixed to sides with piano hinge as per drg.

M& L for Removing old, S&F new Door Shutter of size 518mmx400mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood fixed to sides with piano hinge as per drg.

M& L for Removing old, S&F new Sides of size 637mmx450mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick teak wood beading as per drg.

M& L for Removing old, S&F new Front face of drawer of size 450mmx100mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with top edge duly covered with 4 mm thick teak wood beading as per drg.

M& L for Removing old, S&F new Bottom ply of drawers of size 450mmx400mm made out of 6mm plywood BWR fixed with adhesive and headless nail as per drg.

M& L for Removing old, S&F new Sides of drawers of size 100mmx400mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with top edge duly covered with 4 mm thick teak wood beading as per drg.

M& L for Removing old, S&F new Handles of size 100mm long 8mm dia chrome plated shall be fixed using internal metal screws

M& L for Removing old, S&F new Magnetic catchers fixed inside shutter with screws as per drg.

M& L for Removing old, S&F new Complete base frame with legs of overall size 1164mmx75mmx20mm made of 1st class teak wood member in lieu of prelaminated MDF board duly fixed by using metal screws and adhesive as per drg..

M& L for Removing old, S&F new Shelf of size 800mmx400mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with top edge duly covered with 4 mm thick teak wood beading as per drg.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only

BOOK CASE SMALL ,FD-237

M& L for Removing old, S&F new Top of size 1200mmx300mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood as per drg..

M& L for Removing old, S&F new Sides of size 660mmx300mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood as per drg.

M& L for Removing old, S&F new Base of size 1200mmx300mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood as per drg.

M& L for Removing old, S&F new Back ply of size 1200mmx660mm BWR 6mm thick fixed with adhesive and headless nails

M& L for Removing old, S&F new Shelves of size 380mmx205mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood as per drg.

M& L for Removing old, S&F new Knob chrome plated 30mm dia.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only

TABLE DRESSING LADIES ,FD-251

M& L for Removing old ,Removing old,S&F new looking mirror of size 1220 x 366mm of thickness 5mm .The back of mirror shall be supported by providing 6mm thick BWR -grade-A .Complete all as specified and as shown on drawing.

M& L for Removing old ,Removing old,S&F new top of size 900mmx368mm to the table dressing ladies made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old, Removing old,S&F new sides of size 300mmx380mm to the table dressing ladies made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for removing old,Removing old,S&F new bottom of size 900mmx368mm to the table dressing ladies made out of 18mm thick BWR-grade-A plywood.Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new back of size 900mmx350mm to the table dressing ladies made out of 12mm thick BWR -grade-A plywood. Complete all as specified and as shown on drawing

M& L for Removing old,S/F sliding plain glass of 5mm thickness supported on dual run aluminium channel 5mm thick shutters Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new right hand drawer made out of 18mm thick prelaminated MDF board [ISI Marked] exterior grade duly providing 4mm thick teak wood beading on top and base of 6mm BWR plywood including chrome plated 30mm dia decorative knob to each drawer.Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new long stiffener of size 560mmx40mmx25 mm made out of first class hard wood teak.Complete all as specified and as shown on drawing

M& L for Removing old,S/Fnew short stiffener of size 140mmx40mmx25 mm made out of first class hard wood teak.Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new legs of size 45 mmx45mm made out of first class hard wood teak.Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new vertical members at back of mirror of size 45mmx40mm made out of teak wood .Complete all as specified and as shown on drawing

Polishing to dressing table ladies with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment..

HAT STAND WITH MIRROR,FD-233

M& L for Removing old,Removing old,S&F new Front teak face plywood 4mm thick of size 1000mmx710mm as per drg

M& L for Removing old,Removing old,S&F new Back Commercial plywood 4mm thick of size 1000mmx710mm as per drg

M& L for Removing old,Removing old,S&F new Wooden frame member of size 1000mmx20mmx50mm as per drg.

M& L for Removing old,Removing old,S&F new 5mm thick looking mirror of size 440mmx300mm duly fixed with teak wood beading made out of 10mmx12mm section .

M& L for Removing old,Removing old,S&F new Teak wood beading of size 710mmx35mmx6mm as per drg.

M& L for Removing old,Removing old,S&F new Teak wood beading of size 1000mmx35mmx6mm as per drg.

M& L for Removing old,Removing old,S&F new Brass Peg of size 120mm long duly fixed with brass screws as per drg.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only

TABLE 3' X 2' WITHOUT DRAWER;- FD-284

M& L for Removing old,Removing old,S&F new Top of size 900mmx600mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

M& L for Removing old,Removing old,S&F new Legs of size 760mmx30mmx60mm made of 1st class teak wood as per size on drg

M& L forRemoving old,Removing old,S&F new Top long rail of size 900mmx20mmx60mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Top Short rail of size 600x20mmx60mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Bottom rail of size 600mmx20mmx60mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Centre stiffener of size 900mmx20mmx60mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood

M& L for Corner shape wooden bracket of size 100mmx100mmx20mm shall be fixed to legs and rail with adhesive and screws.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TABLE 3' X 2' WITH DRAWER :- FD-283

M& L for Removing old,Removing old,S&F new Top of size 900mmx600mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

M& L for Removing old,Removing old,S&F new Legs of size 760mmx30mmx60mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Top long rail of size 900mmx20mmx110mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Top Short rail of size 600x20mmx110mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Bottom rail of size 600mmx20mmx60mm made of 1st class teak wood irrespective of what is shown in drg ,made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Centre stiffener of size 900mmx20mmx60mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood

M& L for Removing old,Removing old,S&F new Front facia of drawers of size 100mmx 300mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood .

M& L for Removing old,Removing old,S&F new Bottom ply of drawers of size 540mmx300mm made out of 6mm plywood BWR fixed to side ply in groove as shown in drg.

M& L for Removing old,Removing old,S&F new Sides of drawers of size 100mm x 540mm made out of 12mm thick BWR plywood with edges duly covered with 4 mm thick beading of teak wood

M& L for Corner shape wooden bracket of size 100mmx100mmx20mm shall be fixed to legs and rail with adhesive and screws.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TEAPOY WOODEN,FD-232 & 278

M& L for Removing old,Removing old,S&F new Top of size 600mmx450mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

M& L for Removing old,Removing old,S&F new Legs of size 520mmx60mmx30mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Top long rail of size 600mmx 50mmx20mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Bottom rail of size 450mmx50mmx20mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Long Stiffener of size 600mmx20mmx50mm in between two bottom rails irrespective of what is shown in drg ,made of 1st class teak wood.

M& L for Corner shape wooden bracket of size 75mmx75mmx20mm thick shall be fixed to legs and rail with adhesive and screws.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TABLE CENTRE ,FD-274

M& L for Removing old,Removing old,S&F new Top of size 900mmx450mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

M& L for Removing old,Removing old,S&F new Legs of size 400mmx30mmx60mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Top long rail of size 900mmx20mmx50mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Top short rail of size 450mmx20mmx50mm made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Bottom Rail of size 450mmx20mmx50mm Short Stiffener made of 1st class teak wood as per size on drg

M& L for Removing old,Removing old,S&F new Centre stiffener of size 900mmx20mmx50mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood

M& L for Corner shape wooden bracket of size 75mmx75mmx20mm shall be fixed to legs and rail with adhesive and screws.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only

TABLE WRITING :-FD- 275

M& L for Removing old,Removing old,S&F new Top of size 1145mmx600mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

M& L for Removing old,Removing old,S&F new Top Long rail of size 740mmx25mmx50mm made of 1st class teak wood as per drg

M& L for Removing old,Removing old,S&F new Top Short rail of size 600mmx25mmx50mm made of 1st class teak wood as per drg

M& L for Removing old,Removing old,S&F new back ply of size 596mmx400mm made of 6mm plywood as per drg

M& L for Removing old,Removing old,S&F new Bottom stiffener of size 1145mmx25mmx50mm in between two short stiffeners irrespective of what is shown in drg ,made of 1st class teak wood

M& L for Removing old,Removing old,S&F new Sides of compartment of size 592mmx600mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood

M& L for Removing old,Removing old,S&F new Front face of drawers of size 120mmx370mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood .

M& L for Removing old,Removing old,S&F new Front face of shutter of size 590mmx600mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood .

M& L for Removing old,Removing old,S&F new Bottom ply of drawers of size 370mmx540mm made out of 6mm plywood BWR fixed to side ply in groove as shown in drg.

M& L for Removing old,Removing old,S&F new Sides of drawers of size 120mmx540mm made out of 12mm thick BWR plywood with edges duly covered with 4 mm thick beading of teak wood

M& L for Removing old,Removing old,S&F new Legs of size 740mmx35mmx55mm made of 1st class teak wood as per drg

M& L for Removing old,Removing old,S&F new Handle of size 100mm long chrome plated.

M& L for Corner shape wooden bracket of size 100mmx100mmx25mm thick shall be fixed to legs and rail with adhesive and screws.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TABLE BED SIDE,FD-276

M& L for Removing old,Removing old,S&F new Top of size 450mmx230mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

M& L for Removing old,Removing old,S&F new Sides of size 510mmx 230mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

M& L for Removing old,Removing old,S&F new Shelves of size 414mmx224mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

M& L for Removing old,Removing old,S&F new Bottom of size 414mmx224mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

M& L for Removing old,Removing old,S&F new Back ply of size 392mmx432mm made of 6mm BWR plywood duly fixed with adhesive and headless nails as per drg.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TABLE PEG ,FD-236/277/384

M& L for Removing old,Removing old,S&F new Top of size 450mmx300mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

M& L for Removing old,Removing old,S&F new Legs of size 362mmx30mmx50mm made of 1st class teak wood as per drg

M& L for Removing old,Removing old,S&F new Top long rail of size 450mmx20mmx40mm made of 1st class teak wood as per drg

M& L for Removing old,Removing old,S&F new Bottom side rail of size 300mmx20mmx40mm made of 1st class teak wood as per drg

M& L for Removing old,Removing old,S&F new Bottom Stiffener of size 450mmx20mmx40mm in between two short stiffeners irrespective of what is shown in drg ,made of 1st class teak wood

M& L for Corner shape wooden bracket of size 75mmx75mmx20mm shall be fixed to legs and rail with adhesive and screws.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TABLE DINING FOR 6 PERSONS:-FD/MAP-II/03

M& L forRemoving old,Removing old,S&F new Top of size 1500mmx900mm made out of 18mm thick prelaminated MDF board exterior grade,natural teak color, edges duly covered with 4 mm thick beading of teak wood

M& L for Removing old,Removing old,S&F new Legs of size 705mmx90mmx45mm made of 1st class teak wood as per drg

M& L for Removing old,Removing old,S&F new Long rail of size 1500x45mmx90mm made of 1st class teak wood as per drg

M& L for Removing old,Removing old,S&F new Short rail of size 900mmx45mmx90mm made of 1st class teak wood as per drg

M& L for Removing old,Removing old,S&F new Top stiffeners of size 900mmx25mmx90mm made of 1st class teak wood as per drg

M& L for Corner Shape wooden bracket of size 100mmx100mmx35mm thick shall be fixed to legs and rail with adhesive and screws.

M& L for Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish by spray machine only

TABLE DRESSING GENTS,FD-230

M& L for Removing old,Removing old,S&F new looking mirror of size 760mm x 380mm with thickness 5mm .The back of mirror shall be supported by providing 6mm thick BWR -grade-A .Complete all as specified and as shown on drawing.

M& L for Removing old,Removing old,S&F new top of size 900mmx300mm to the table dressing gents made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new sides of size 150mmx300mm to the table dressing gents made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new bottom of size 900mmx300mm to the table dressing gents made out of 12mm thick BWR-grade-A plywood.Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new back of size 900mmx150mm to the table dressing gents made out of 12mm thick BWR -grade-A plywood. Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new vertical members at back of mirror of size 35mmx25mm made out of teak wood .Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new drawer made out of 18mm thick prelaminated MDF board [ISI Marked] exterior grade duly providing 4mm thick teak wood beading on top and base of 6mm BWR plywood including chrome plated 30mm dia decorative knob to each drawer.Complete all as specified and as shown on drawing

M& L for Polishing to dressing table gents with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment..

DRESSING TABLE MAP (FD/MAP-II/07)

M& L for Removing old,Removing old,S&F new looking mirror of required size with thickness 5mm .The back of mirror shall be supported by providing 6mm thick BWR -grade-A .Complete all as specified and as shown on drawing.

M& L for removing old,Removing old,S&F new top to side compartments of size made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new back to table dressing made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new sides to side compartments made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new bottom to each side compartments made out of 12mm thick BWR-grade-A plywood.Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new complete drawer to side compartments made out 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new shutters to side compartments made out 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,Removing old,S&F new chrome plated handles of size 100mm long to drawer and shutter.Complete all as specified and as shown on drawing

M& L for Polishing to dressing table with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

STOOL OF DRESSING TABLE , FD/MAP-II/07

M& L for Removing old,Removing old,S&F new openable shutter to stool made of 12mm thick BWR plywood of grade-A duly fitted with recessed type drawer pull folding handle of size not less than 75mmx37mmx4mm .Complete all as specified and as shown on drawing.

M& L for Removing old,S&F new sides to stool made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging alround. Complete all as specified and as shown on drawing

M& L for Removing old,S&F new bottom to stool made out of 6mm thick BWR plywood. Complete all as specified and as shown on drawing

M& L for Removing old,S&F new 50mm dia twin wheel castor wheel of heavy duty duly fixed with 20mm long screw .Complete all as specified and as shown on drawing

M& L for Removing old,S&F new wooden runners of size 20mmx20mm inside the stool as sown in drg .Complete all as specified and as shown on drawing

M& L for Removing old,S&F new seat of stool made to shape of 75mm thick 40 density PU foam duly covered with best qulaity tapestry cloth of rate not less than 400 per mtr .Complete all as specified and as shown on drawing

M& L for Polishing to stool dressing MAP with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

SIDE BOARD,FD-241/372

M& L for Removing old,S&F new top to Side Board made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,S&F new sides to Side Board made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,S&F new centre partition to Side Board made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,S&F new back to Side Board made out of 6mm thick BWR plywood. Complete all as specified and as shown on drawing

M& L for Removing old,S&F new shelf to Side Board made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,S&F new sides to drawers made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at top edge. Complete all as specified and as shown on drawing

M& L for Removing old,S&F new front face of drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at top edge. Complete all as specified and as shown on drawing

Removing old,S&F new bottom ply 6mm to drawer made out of 6mm thick BWR plywood including 4mm thick teak wood edging at top edge. Complete all as specified and as shown on drawing

M& L for Removing old,S&F new drawer to Side Board made of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with 6mm thick plywood at bottom including 4mm thick teak wood edging at front.Complete all as specified and as shown on drawing

M& L for Removing old,S&F new leg to base frame of Side Board made out of section 45mmx45mm of teak wood.Complete all as specified and as shown on drawing

Removing old,S&F new bottom frame made of 45mmx25mm teak wood members.Complete all as specified and as shown on drawing

M& L for Removing old,S&F new shutters to Side Board made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

M& L for Removing old,S&F new 30mm dia chrome plated decorative knob to drawer and shutter.Complete all as specified and as shown on drawing

M& L for Polishing to side board with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

MIRROR DRESSING GENTS,FD/E6/MAP/16

S/F the sides of the mirror dressing gents made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

S/F the back of the mirror dressing gents made out of 12mm thick BWR plywood of grade-A. Complete all as specified and as shown on drawing

S/F the teak wood frame of the mirror dressing gents for holding the looking mirror in position made of teak wood battens of size 38mmx25mmx1200 mm long section. Complete all as specified and as shown on drawing

S/F the decorative beading of size 30mmx15mm x 1200mm long to the mirror dressing gents of teak wood.Complete all as specified and as shown on drawing

S/F the shelves of size 100mmx600mm made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front irrespective of what is shown in drg.Complete all as specified and as shown on drawing

S/F the teak wood bracket of size 38mmx112mmx112mm. Complete all as specified and as shown on drawing

S/F the legs made out of teak wood of size 38mmx38mmx450mm.Complete all as specified and as shown on drawing

S/F the magnetic catchers to the shutter. Complete all as specified and as shown on drawing

M& L for Polishing to mirror dressing gents with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

SOFA CHAIR SINGLE SEATER WITH CUSHION (Drg No. TP)

M& L for Removing old material i.e- zig zag upholstery metal springs,tapestry cloth,lining cloth, foam cushion from each seat, supply and fixing new zig zag metal springs of 12 guage,new tapestry cloth of rate not less than 350 per mtr in 560 GSM thickness of approved colour and shade, best quality lining cloth, 40 density PU foam cushion of thickness 150mm to restore the seat in the same shape.The bottom of seat shall be packed with best qulaity hessian cloth and to be fixed with stapler pins. Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard . Make of Foam 40 density-Kurlon/Sleepwell/U-foam Make of Tapestry cloth:- D'decor/Drone/Milestone/Asmara or as per approved sample

M& L for Removing old materail i.e-elastic webbing tape,tapestry cloth,lining cloth, foam cushion from each back ,supply and fixing new elastic webbing tape 75mm wide,new tapestry cloth of rate not less than 350 per mtr in 560 GSM thickness of approved colour and shade, best quality lining cloth,40 density PU foam cushion of thockness 150mm to restore the seat in the same shape.The back of seat shall be packed with same tapestry cloth with proper workmanship. Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard . Make of Foam 40 density-Kurlon/Sleepwell/U-foam Make of Tapestry cloth:- D'decor/Drone/Milestone/Asmara or as per approved sample

M& L for Removing old ,supply and fixing new legs of size 70mmx25mmx495mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Removing old ,supply and fixing new arm of size 70mmx25mmx745mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

M& L for Scratching the entire wooden pallets of sofa chair with sand emery paper of various grit , filling the pores with wood filler to make good the surface,After prepartion of surface the entire sofa chair shall be polished in french finish in high gloss with spary machine only. Make of french polish-Asian paints/Berger paints

Material and labour for painting to articles of steel furniture by adhering to following steps:- a) The existing surface of each steel article shall be made smooth by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it again to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade in each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. b) The painting to each article shall only be carried out by spray machine only. c) The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per user requirement.

Almirah large steel with shelves ,FD-1031

Almirah med/small with shelves steel ,FD-1032

Bed hard Steel MAP ,FD/E6/MAP/08[R]

Chair CB steel with arms ,FD-75

Chair CB steel without arm ,FD-75

Chair verandah ,FD-359/19/256

Form without back steel FD-77

Locker bed side steel FD-1029

Rack 6 tier steel FD-1038

Rack shoe steel FD/E6/MAP/02[R]

Table 3'x2' w/o drawer steel/Table Hav/Ors FD-1007

Table 3'x2' with drawer steel FD-1008

Table bed side FD/E6/MAP/15[R]

Table dining ORs steel FD-165

Table office clerk steel FD-1004

Table office officer steel FD-1003

Teapoy verandah FD-383

Trestle SR steel FD-1043

Material and labour for polishing to articles of wooden furniture by adhering to following steps:- a) The wooden article shall be made smooth by sanding the surface with sand paper of about 120 grit in the direction of grains of wood. b) Repeat the process with progressively finner grains with 180-220 grit sanding paper to make the surface more finer. c) Wipe out the surface and remove the dust with a fine cloth. d) Examine the surface and fill yellow oxide or wood filler/putty in the holes and sand the surface again to achieve a smooth and cleaner surface. e) Wipe it gain with cloth and apply a coat of polish and let it dry. f) Sand the surface again and apply next coat with a soft brush or cloth. g) Let the surface dry completely and apply a clear coat over it. h) The painting to each article shall only be carried out by spray machine only. j) The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per user requirement.

Bed ply top with MNF set FD-246/247

Bin linen multipurpose FD/E6/MAP/09

Bin soiled linen 900x 450 large FD-15,244

Book case wooden FD-45/58

Chair dining FD-279/228/1105

Chair dining JCO/OR FD/MAP-II/05

Chair dining Offrs FD/MAP-II/04

Chair Easy FD-17/229/201/1108

Chair wooden bottom w/o arms FD-285/225/56

Chair writing FD-280/250/20/202

Hat stand with mirror FD-23/206/233

Locker wooden FD-222/54[M]

Mirror Dressing gents FD/E6/MAP/16

Sofa set 5 seater spl type

sofa set 7 seater spl type

Side board FD-241/371/1112

Sofa chair single seater with cushion TP

Sofa set 4 seater with cushion FD-281/258/373

Sofa set 5 seater with cushion FD-281/258/373

Stool dressing CB FD-282/252/374

Stool dressing with cushion FD/E6/MAP/14

Table 3'x2' w/o drawer (W) FD-284

Table 3'x2' with drawer (W) FD-283

Table 3'x3' wooden FD-291

Table bed side FD-276/28

Table centre FD-274

Table Dining 1200x900mm FD/MAP-II/03

Table dining 6 persons FD/MAP-II/03

Table dining 8 persons FD/MAP-II/03

Table dressing gents FD-230/31

Table dressing including stool FD/MAP-II/07

Table dressing ladies with mirror FD-251/32

Table office clerk wooden DB-4314

Table office officer wooden DB-4313

Table peg FD-277/236/266

Table writing FD-275/249/268

Teapoy wooden FD-278/382/232

Teapoy wooden FD-86

PACHNANDA BUILDERS

M/S RAJINDER GOODS TRANSPORT CARRIER