Maintenance to Pujariguda to Rebatiguda road in kolnara Block for the year 2026 27

Clearing grass and shrub jungle and uprooting stumps and small bushes and tree below 0.3M on premeasurement removal of rubbish on both sides of the road to facilitate widening of berms, disposal of the stuff including all labour, T&P, Cess, articles required for the work etc. complete and direction of the Engineer-in-charge.

Providing,scraping & cleaning the road surface for37.50 MM thick BUSG applying tack coat using 3.0 Kg. of bitumen for 10 Sqm and laying37.50mm thick built up spray grouting in Onelayerusing 0.45 cum of 25mm to 40mm size hard granite metal and 12.00 kg penetration grade of bitumen(80/100) for 10 sqm with 0.12 cum of 12mm size hard granite chips as key stone for 10 Sqm spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire and running charges of PRR and all other machineries and including cost and conveyance bitumen, metal and chips with all labour, T&P & Cess etccompleted as per specification and direction of Engineer-in-Charge.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 of MoRD & as per direction of Engineer-in-Charge.

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen,transporting the hot mix to work site,layingwith a hydrostatic paver finisher with sensor control to the required grade,level and alignment and rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specification for road & Bridge works (4th Revision) with cost,conveyance,Royalty, DMF, EMF & Additional Charges ,including cost of all labour,T&P and Cess required for the work complete in all respects as per direction of the Engineer-In-Charge.

Providing & layinglaterite moorum of approved quality from approved quarry & spreading on road surface to required slope & camber including watering & compacting with H.R.R to the required density to required thickness including cost, conveyance,Royalty, DMF, EMF & Additional Charges T&P of all materials required for the work with Cess etc complete as per specification & direction of Engineer-in-charge.

Construction of enbankment with approved material obtained from borrow ptis with all lead and lifts transporting to site by machanical means within a lead of 5Kms spreading,grading to required slope and compacting to meet requirements of table 300-2 & clause 305 of MOSRT & H specification including Royalty, DMF, EMF & Additional Charges charges and cost of all materials labour charges,machineries, T&P Cess etc required for the work complete as per direction of E.I.C

Road marking with hot Applied thermoplastic compound with Reflectorising Glass beads on bituminous surface providing and applying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gms per Sqm area,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35.The finished surface to be leveled,uniform and free from streakers and holes