GE (P) AF/GUR- 67/2020-21 RISK AND COST CONTRACT FOR COMPLETION OF LEFT OVER WORKS AGAINST SPECIAL REPAIRS TO O AND P SHED AT AF STN GURGAON UNDER GE (P) AF GURGAON

Amount

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed by Engr-in-Charge.

M&L for 20-25 mm thick machine cut kota stone slab flooring in patches over 15 mm thick thick cement screed bed in CM 1:6 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror type polishing complete all as directed by Engr-in-Charge.

M&L for applying evenly primer @ 0.3 ltr/Sqm and laying of APP based polymeric membrane, 3mm thick weight not less than 3.6 kg/sqm reinforced with polyester non woven fabric membrane with end laps of the 10cm and side over laps of 7.5cm and sealing all overlaps & joints , complete fixing membrane with thermofused the LPG flame and tack coat of industrial bitumen 85/25 ISI marked @ 1.2 kg/Sqm over clean plastered surfaces and complete all as specified & directed by Engr -in - Charge. Make :HYPERPLUS POLYSTER-IWL INDIA LTD , MOPLY FP-STP TEXSA LTD, HYDROSTOP-TIKITAR INDUSTRIES & POLYMOD AP-CHOKSEY CHEMICAL PVT LTD.

M&L for rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces, finished fair & even w/o using extra cement including taking down of cement plaster and applying three coat of white wash on walls complete all as directed by Engr-in-Charge.

M&L for Preparation old decorated surfaces of walls, cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading of oil and greasy spots by complete scraping and washing with water entier satisfaction with Engr-in-Charge and applying two coat of cement paint complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation old decorated surfaces of ceiling , spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying two coat of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L for Providing reinforced cement concrete type B-l, 1:1.5:3 (using 20 mm graded aggregate) as in precast posts, fencing posts, dnage blocks, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm and not exc 250 cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed, complete all as specified and as directed by Engr-in-Charge.

M&L for TMT reinfocement steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

All as per item No 8 hereinbefore but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed by Engr-in-Charge.

M&L for Flame Proof wiring complete with 1.5 Sqmm (nominal area) PVC insulated unsheathed stranded copper conductor cable in and including ERW rigid conduit (stove enameled) concealed conduit for one light point /Fan point / 5 Amp multipurpose switch socket with other than FP junction box, FP bend, FP reducer independent for 2 light points controlled by one (MCB) including copper wire as specified above for earth wire to common earth and connected to earth dolly complete as specified. Following and all other flame proof fitting for wiring shall be incorporated in wiring as required basis and cost there of shall be included in the rate eqotted. (a) Flame proof junction box 3 way suitable for 3/4'' ET conduit material LM-6. Make: Sudhir, Cat No JB/OA/104 or equivalent model of make Baliga, crompton greaves shyam. (b) Flame proof junction box 2 way suitable for 3/4'' ET conduit material LM-6. Make: Sudhir, Cat No JB/OA/104 or equivalent modelof made Baliga, Crompton greaves shyam (c) Flame proof junction box 3 way suitable for 3/4'' Conduit material LM-6. Make: Sudhir, CAT No JB/OA/104 or equivalent model of baliga crompton greaves shyam. (d) Supply and fix frame proof union suitable for 20mm dia ERW conduit make pluto, Baliga Shyam.

Supply and fixing flame proof distribution board made of die cast of aluminium alloy (LM-6) GAS GROUP 11A, 11B, certified by CMRI Dhanbad suitable SPN 4 way 230 volts suitable for incoming isolator SPN and outgoing for MCB SP and confirming to IS-2148/2004 complete all as specified and as directed. Make: Shyam Cat Part No SSPL/CS/174/Sudhir/Surya.

Supply and fix flouroscent tube light fitting flame proof suitable for 1x28 Watt T-5 (FLP-WP) including integral reflector made of aluminium alloy LM-6 of gas group 11A,n 11B certified by CMRI Dhanbad with electronic ballast BIPIN Holder, connector block etc and all accessories prewired and including connecting up with twin core twisted flexible copper conductor with suitable size complete all as specified and as directed. Make- Shyam Cat Part No SSPL/FF/1271/Sudhir/Surya.

M&L for earthing with galvanized steel earth plate electrode 600x600x6mm size burried directly in ground to depth not less than 2.25m below ground level with top edge of the plate not less than 1.5 mtr below normal ground level surrounded with char coal and common salt filling in alternative layers of 15cm thick and connected to GI earth wire 4 mm dia by means of nuts/bolts and washers etc made out of galvanized iron including 15mm dia GI pipe light grade for protection of earth wire from earth to distribution board 20mm dia GI pipe medium grade connected to funnel heavy wire mesh for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B1 for contrite pit 10mm thick PCC slab cover frame complete all as specified and shown in electric plate Nos 3/ SSR Pt-I and testing on completion including old replacement of old earthing.

Supply, laying, jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq.mm 4 core, complete all as specified and as directed.

Supply, laying, jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq.mm 4 core, complete all as specified and as directed.

Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete as sepecified.

M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation (punned thickness shall be measured) complete all as specified and as directed.

Supply and fixing Bricks, common burnt clay, building bricks, Class 'B' designation 75 as in brick cable protection complete all as specified as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point complete all as specified and as directed.

M&L for Cutting, griding and mirror type polishing of existing kota stone laid against Item No 2 of CA No GE(P)AF/GUR-77/2018-19 (Original Contract) including minor repair with grey cement and pigment as required complete all as specified and as directed.

PARKASH ENTERPRISES

NAVREET CONSTRUCTION