Tender ID

Karnataka

AOC

Works

Roads

Infrastructure Development Work in B.shigigatti Tanda in Kalaghatagi taluka.

Public Works Department

PWD Division Office Dharwada | Karnataka

Amount: ₹40.2 LCloses: 7 Apr 2026Closed

Timeline

Published28 Mar 2026
Closed7 Apr 2026
Awarded—

Bids

1 Bid7 Apr 2026

#	Company	Amount	Status
1	PARAMESH SHIVAPPA KUMBAR ₹35.4 Laccepted-aoc	₹35.4 L	accepted-aoc

Tender Value

₹40.2 L

EMD Value

₹80,500

Closing Date

7 Apr 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EE.PWD.DHARWAD.

Office Number

Work Description

Infrastructure Development Work in B.shigigatti Tanda in Kalaghatagi taluka.

Tender Information

Tender ID

PWD/2025-26/RD/WORK_INDENT35090

Reference Number

PWD/2025-26/RD/WORK_INDENT35090

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Dharwada

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredPWD Registration Certificate

RequiredSimilar Nature of Work Done Certificate.

RequiredAddress Proof & contact number

RequiredList of existing commitments and ongoing works

RequiredList of works for which tenders already submitted

RequiredBid capacity AXNX2.5-B

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted

All the items in the tender include all lead, lifts, lab our, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of Engineer in charge of this work.

The Tenderer shall obtain the work done certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year(both days inclusive).

The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machinery and attach the scanned file to the Bid.

The tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder

The Employer reserves the right to Reject any or all Tenders without assigning any reason

The Department is not responsible for any delay in accessing e-procurement portal

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderer I T T will only be considered for evaluation

To Qualify for award of this contract, each bidder should give all details and documents as per technical and financial bid attached to this tender

The bidders shall bear all costs associated with the preparation and submission of each tender, and the employer will in no case be responsible and liable for those costs.

All materials required for this work shall be procured by the bidder himself and should got tested by the quality control authorities at his own cost before use on the work.

Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2025-26 in the Technical Qualification Criteria mentioned in the next section

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

The increase in GST shall not be paid in the extended period of the contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

GST shall be paid to the tendered amount separately

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-2 KPWD and further orders thereon.

The Total EMD Rs. 80,500/-

Successful bidder should produce 5% of the Contract price plus difference amount for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract.

Any deviation / error / mistake found in units of items, they should be read as in the unified SR 2023-24 and the rates shall be quoted accordingly.

Period of completion 6 months (including monsoon.)

Assessed available tender capacity A x N x 2.5- B

The Tenderer should be a PWD Registered Class III & above contractor

Technical Criteria

General

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Past Experience

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 ,2021-22, 2022-23, 2023-24 & 2024-25 Satisfactorily completed as prime contractor, at least one similar work such as Improvements to road of value not less than Rs.20.12 Lakhs.

Work Done Certificate

Capabilities of Vendor

PWD Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21 ,2021-22, 2022-23, 2023-24 & 2024-25 a) Achieved in at least two financial years an average financial turnover (in all classes of civil engineering construction works only) of Rs. 40.23 Lakhs- Turn Over certificate must have UDIN Number Otherwise it will not be considered.

Audited CA Certificate of Annual Turnover

Annual Financial Turnover Certificate for the last five years i.e from 2020-21 to 2024-25, UDIN is preferred in Turnover certificate

Audited CA Certificate of Annual Turnover

Others

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

Banker Details for reference

Others -- Banker Details for reference

Address Proof & Contact Number

Others -- Address Proof & Contact Number

Assessed available tender capacity A x N x 2.5- B

Others -- Assessed available tender capacity A x N x 2.5- B

Fee & Financial Details

Tender Fee Amount

₹1,010

EMD Fee Amount

₹80,500

Important Dates

Last Activity

7 Apr 2026

Published

28 Mar 2026

Bid Opening

8 Apr 2026

Download Ends

6 Apr 2026

BOQ Preview

•

Infrastructure Development Work in B.shigigatti Tanda in Kalaghatagi taluka.

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 150...

•

Cable Duct Across the Road - Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of sl...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Infrastructure Development Work in B.shigigatti Tanda in Kalaghatagi taluka.(DRAIN)

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all mater...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.2...

•

Infrastructure Development Work in B.shigigatti Tanda in Kalaghatagi taluka.(CONICAL POLE)

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires (PWD Electrical SR 2023-24, Pg No: 5...

•

Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.22/25 A...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying,fixingandwiring3PhaseDigitalAmmeter/Voltmeter (PWD Electrical SR 2023-24, Pg No: 19/105 )

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (PWD Electrical SR 2023-24, Pg No: 19/105 )

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and paintedwith 2 coats of red oxide and then two coats of approved paint. 5...

•

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting (PWD Electrical SR 2023-24, Pg No: 21/105 ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, ...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

•

1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010

•

PVC Wire - 10 Sqmm Weight per 100 Mtr Coil: 5.3 Kg

•

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip (PWD Electrical SR 2023-24, Pg No: 54/105 )

•

HDPE/PLB Pipe 40/33 mm (PWD Electrical SR 2023-24, Pg No: 30/81 )

•

Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, ...

•

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

35090 GEN KW-2.doc

Tender Document • 0.89 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

PARAMESH SHIVAPPA KUMBAR

₹35.4 Laccepted-aoc