SPL REPAIR TO BLDG NO P-19 NEHRU ROAD, P-37/1, P-37/3, P-40/1 AND P-40/4 NEHRU ENCLAVE AND PROVN OF STORM WATER DRAIN ALONGWITH NEHRU ROAD AT AGE BR-I UNDER GE (EAST) LUCKNOW

Amount

Site clearance by removing shrubs, bushes, cutting of branches, etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolation in cement concrete in ground floors and paving not exc 15 cm thickness (below or above ground level) etc complete all as specified and directed.

M&L joint less non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, laid over 15mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L, glazed ceramic coloured tiles (joint free) of size 450X 350X 7mm/450x300x7mm thick over 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L PCC (1:2:4) 40 mm thick type B 1 (using 20 mm graded aggregate) as in floor etc complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured, area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick cement plaster in CM (1:4) etc all as specified and directed. all as specified and directed.

Taking down cement plaster on brick or stone walls etc including ranking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4.finished even and fair with mixing of water proofing compound complete all as specified and directed.

M&L rendering 10mm thick on fair faces of brick work in CM(1:6) surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 5mm thick in CM 1:3 as in ceiling ,soffits of slab and finish the surface even and smooth without using extra cement complete all as specified and as directed.

M&L three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L preparation and applying one coat of white wash on old plastered surface of ceiling complete all as specified and directed.

M&L two coats of cement base paint over a coat of alkali resistant primer on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L complete removal of existing treatment and applying two coat of cement base paint over a coat of alkali resistant priming paint with 1 mm thick birla putty on old plastered surfaces of walls etc complete all as specified and directed.

M&L two coats of OBD over a coat of primer on new plastered surfaces of walls including preparation and 1 mm thick birla putty on wall surfaces etc complete all as specified and directed.

M&L one coat of OBD over a coat of primer on old plastered surfaces of walls including preparation of surfaces all as specified and directed.

Taking down 15mm bore GI tubing of any description including cleaning for refixing or removal to store complete all as specified and directed.

Taking down 20mm bore GI tubing of any description including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore steel water tubes medium grade, galvanised with all fittings complete to concilled in walls and ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubes medium grade, galvanised with all fittings complete to walls and ceiling or laid in floors trenches complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, complete all as specified and directed.

S&F in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repaair 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm bore angle valve /stop valve chromium plated fency type.cast copper alloy screwed down high pressure,crutch or butterfly handle, ,screwed both end for pipe or for unions complete all as specified and directed.

S&F 15mm dia stop valves, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair 15 mm bore brass CP mixer for mixing hot or cold water screwed down for iron pipe and fixed etc complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre (ISI marked) complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1 mm thick with plug washer and waste including bedding in cement mortar including fixing cantilever bracket and connecting union to pipe overall size 915 X 460 mm bowl size 410 X 330 X 160 mm complete all as specified and directed.

S&F stainless steel kitchen plate rack wall mounted of overall minimum size 750x600mm and 250 mm deep, with partition for small/large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and cp steel screws weight of rack shall not be less than 3.8 kg complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Padestal pattern) white (excluding flushing cistern and flush pipe) etc complete all as specified and directed.

S&F in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F, in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

S&F in repair, brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 100mm dia grating doom 100 mm dia PTMT complete all as specified and directed.

S&F in repair 60cm sheet glass shelf assemble consisting of 5.5 thick sheet glass shelf 12cm wide with CP bracket gaurd & railing complete all as specified and directed.

S&F in repair Glass corner shelves, fancy type, 6 mm thick 250 mm x 250 mm size and fixed over CP brass bracket etc complete all as specified and directed.

S&F PVC bath cabinet with 4 mm thick loocking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed.

S&F brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair health faucet with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed.

S&F CP toilet paper holders etc complete all as specified and directed.

Demolition and breaking up any dia and above drain pipe( salt glazed ware, AC,PVC or reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) access door bends any radius complete all as specified and directed.

PVC 75 mm bore (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl dismantling water tank and remove to store etc complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl dismantling water tank and remove to store etc complete all as specified and directed.

Taking down chowkhats or frames with shutter, (without taking off shutters from the frame), exc 1.5 sqm but not exc. 4 sqm, complete all as specified and directed.

Taking down chowkhats or frames with shutter, (without taking off shutters from the frame), not exc. 1.5 sqm complete all as specified and directed.

Taking down shutter of any description area not exc. 1 sqm each complete all as specified and directed.

Taking down shutter of any description area exc. 1 sqm and not exc. 2 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm and not exc 2.0 sqm each and refixing in same opening etc complete all as specified and directed.

S&F second class HW plain, solid, straight chowkhat and framed wrought, framed rebated, on the solid rounded or completed but together with glue pinned complete all as specified and directed.

M&L for 30 mm thick flush shutters, solid core construction, with block board 3 core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood plain framed panelled shutter (two panel) with lock rail and panal of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial face veneered on both faces. the size of rail and stile as per IS: 1003 (Part - I) kiln seasoned and chemically pressure treated etccomplete all as specified and directed.

M&L 35 mm thick 2nd class hard wood glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc. but divided into squares, with plain, chamfered or rounded mitered and rebated with sash bars any numbers, size of members of shutter as specified in SSR Part –I section 8, claused 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

M&L 35 mm thick 2nd class hard wood glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc. but divided into squares, with plain, chamfered or rounded mitered and rebated without sash bars, size of members of shutter as specified in SSR Part –I section 8, claused 8.20 (b) supplied and fitted to chowkats complete all as specified and directed.

M&L for Factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; pannelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed together with solvent cement.

M&L PCC(1:2:4), type B-1 as in cills, steps, seismic band and other similar band, copings, bed block, kerbs, water thoughting and incl weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F mild steel work for hold fasts and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed.

M&L preparation surfaces of wood & wood based materials, treating back of chowkhats etc, area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm each with tar or coal tar black paint complete all as specified and directed.

M&L preparation surfaces of wood & wood based materials treating small articles such as hold fast area n exc. 0.1 Sqm each with tar or coal tar black paint complete all as specified and directed.

S&F 100mm butt hinge medium weight SS, complete all as specified and directed.

S&F 75mm butt hinges medium weight SS complete alln as specified and directed.

S&F 50mm butt hinge medium weight SS, complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles, fabricated type, anodised etc complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised etc complete all as specified and directed.

S&F 100mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 250mm extruded aluminium alloy sliding door bolt, fabricated type anodized complete all as specified and directed.

M&L painting to wood and wood based surface of any description over 10cm width or girth including two coat of synthetic enamel paint over a coat of pink primer including preparation of newly or previously untreated surface complete all as specified and directed.

M&L painting to wood and wood based surface of any description over 10cm width or girth including one coat of synthetic enamel paint including preparation of old wooden surface complete all as specified and directed.

M&L painting to steel and iron surface of any description over 10cm in width or girth not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surfacecomplete all as specified and directed.

M&L painting to steel and iron surface of any description over 10cm in width or girth not otherwise described with one coat of synthetic enamel paint including preparation of old steel surface etc complete all as specified and directed.

S&F in repair for aluminium alloy wire mesh 0.45 mm normal dia of wire and average width of aperture 1.40 mm fixed etc complete all as specified and directed.

S&F for aluminium alloy wire cloth, 0.45 mm normal dia of wire and average width of aperture 1.40 mm etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame etc complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.5sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exc. 0.50 Sqm each pane complete all as specified and directed.

S&F 300mm, ordinary rat -tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repair 18/19 mm thick prilaminated partical boad exterior grade laminated on both side with decorative choice lamination as in cupboard door shutter including dismantling complete all as specified and directed.

M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but not exc 6 Sqcm fixed with nail all as specified.

S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete all as specified and directed.

S&F kitchen PVC cabinet in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick pvc sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finishincl all necessary fitting as per site requitment as per make and specification mentioned as per drawing complete all as specified and directed.

M&L providing and injecting chemical emulsion along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. complete all as specified and directed.

M&L treating of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement morter 1:2 to match the existing floor complete all as specified and directed.

Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches pillar etc complete all as specified and directed.

M&L brick work with fly ask bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan any radius in half brick thick built in CM 1:4 complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F, mild steel framed work as in doors or gates of angle or other section drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and stainless steel hings complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in filling/roof padding etc including trawling slightly complete all as specified and directed.

M&L 18-20 mm thick granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shed of granite stone including griding and polishing types incl 15 mm thick screed bed with CM (1:6) etc complete all as specified and directed.

M&L 50 mm thick PCC 1:3:6 type C 2 using 20 mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as floor/path finished cement concrete surface even and smooth without using extra cement etc complete all as specified and directed.

S&F glass dividing strips, 3 mm thick and 38 mm width of strip for PCC floor etc complete all as specified and directed.

Rough surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade with one coat of primer etc complete all as specified and directed.

M&L for complete removal of existing of old plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over & including a coat of primer etc including preparation of surfaces complete all as specified & directed.

M&L 1 mm thick white wall care putty (Make- Birla/JK) etc all as specified and directed.

S&F 15 mm bore CP brass centre hole basin mixture 'U' shape round casted spout with 450 mm long braided hoses etc all as sp and directed.(Make - Jaquar TQT-516A or equivalent)

S&F in repair vitrious china squatting pan orissa pattern size 580x440mm white with P or S trap and making good floor complete all as specified and directed.

S&F in repairs 15mm bore two-way bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Disconnecting existing tanks, exc 250 Ltr & not exc 500 Ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position.(Cleaning repairing, etc. measured separately) complete all as specified and directed.

S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, hinges, lock strike plates,hold fast etc. complete all as specified and directed.

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, hinges, lock strike plates,hold fast etc. complete all as specified and directed.

M&L powder coated aluminum window shutter sliding type using 1.80 mm thick aluminum open three track section having size style & top rails 83 x 44 mm , bottom rails 100 x 44 mm (Make - Hindalco/Jindal) including joining cleats ,glazing clips,rubber packing, aluminium snap beading, screws,with necessary fitting and glazing shall be done by using 5 mm thick plain sheet glass (Make - Modi guard/saint gobin) incl aluminum grill and wire mess jali etc complete all as specified and directed.

M&L for Factory made solid PVC door frame (single rebated) of size 60 mm x 30 mm made out of solid PVC form with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note : door frame shall be water proof, termite proof,elegant and should have excellent screws hoolding strength to fix hinges and hold doors properly for a long life etc complete all as specified and directed.

S&F of factory made solid PVC profiled panel door shutter 28 mm thick with interal skin as frame & 3 mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner & fixing in frame at site as per specifications & drawing etc complete all as specified and directed.

S&F in repair 12 mm thick block board grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work etc complete all as specified and directed.

M&L 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction etc complete all as specified and directed.

Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROFF LW of Dr Pidilite as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of Dr fixit and grouting around the inserted pipes byu porable Dr fixit bath seal grout as directed. (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit as per amnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with Dr. Fixit sealing compounds complete all as specified and directed.

Excavating in trenches not exc. 1.5 m width and not exc 1.5 m depth for foundation or etc for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and not exc 1.5 m in depth or getting out any type of soil complete all as specified and directed

M&L for PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L brick work with fly ask bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete all as specified and directed.

M&L 200mm bore reinforced concrete pipes, class NP-2, laid and jointed complete all as specified and directed.

M&L precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab of main holes, drain and similar article with set in cement mortar 1:4 complete all as specified and directed.

M&L mild steel TMT 8mm dia and over cut to length bent to shape required including cranking bending and binding with mild steel wire (annealed) not less than 0.9 dia off confirming to grade Fe 310 complete all as specified and directed.

M&L cement concrete 1:3:6 type C1 using 40mm graded stone aggregate as in surface channel and drain complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed.

Taking down carefully electric meter by disconnecting all electric connection and kept at site and refixing the same after completion of wiring including suitable concealed pressed steel box 175mm x100 mmx60mm with BL sheet connecting of electric connection complete all as specified and directed.

Taking down & refixing the same after completion of wiring including connecting of electric connection of ceiling fan/exhaust fan with three core copper flexible wire 23/0.0076 complete all as specified and directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box for mounting of hylem sheet of thickness 1.6mm thick terminal boxes concealed on wall/fllor/ceiling, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum for fixing of switches/socket/regulator with brass screws cup washer complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing one and white wash/colour wash complete all as specified and directed.

All as per item No 137 above but 5 Amp socket outlet, independent.

All as per item No 137 above but on the same board.

All as per item No 137 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable.

All as per item No 137 above but for one light point controlled by two, 2- way switch.

All as per item No 137 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

S&F switch piano flush type 5 Amp one way, single pole, 240 volts complete all as specified and directed.

S&F switch piano type 5 Amp, 2 way, 240 volts complete all as specified and directed.

S&F in repairs socket outlet 5 Amp, 5 Pin, 240 volt, flush type, complete all as specified and directed.

S&F in repairs bell push piano type, single pole 1 way 240 volt, complete all as specified and directed.

S&F in repair call bell , ding dong / musical, single phase 230 volts, complete all as specified and directed.

S&F in repairs switch socket outlet, two in one 5 & 15 Amp, 6 pin, multipurpose combination, complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals complete all as specified and directed.

S&Fixing in Replacement lamp holder bakelite with back plate suitable for batten fittings including 12 watt led bulb complete all as specified and directed.

S&F ceiling fan regulator electronic Stepped type for 1200/1400 mm sweep complete all as specified and directed. Make:- Anchor/SSK/Bajaj.

S&F in replacement of LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. Make : Crompton, Cat No : LSTP-45-CDL or equivalent in Havells/ philips

S&F in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed. Make : Crompton, Cat No : LBHE-10-CDL or equivalent in Havells, Cat No : RUGBYNEONFT10WLED760SSYMBOPC, PHILIPS Cat no WT202WLED6SCWPSUS2PC

S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or equivalent in Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC,philips cat no TMC 100 1xT LED /MAS LED tube 1200 mm 18 w 865 T8 I - 2100 Lumen

Taking down carefully ceiling fan of any sweep complete with all accessories, dismantling blades and kept in safe custody including painting complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and hanging and connecting up with provn of 3 core copper flexible cable of size 1.5 Sq mm from ceiling rose to fan complete all as specified & directed.

S&F somil glass decorative wall lamp with fitting & fixture (white) complete all as specified and directed. Make:- Havells/Philips/Bajaj

S&F LED Mirror light fitting 15 watt(2') with extruded aluminium housing and robust construction complete with inbuilt driver. Make: Havells Cat No-LHDT15113631 or equivalent in CG Cat No-LCL-14-CDL/Philips cat No-BN150W LED13S-6500 PSE OD GR .

S&F LED bed side fitting 3 Watt 3000K 150lm complete. Make : Philips Cat No-919215850349 or equivalent in CG/Havells.

S&F surface type LED down lighter 12 Watt with thermally conductive housing and PMMA diffuser complete all as specified and directed. Make: Havells Cat No-LHEAAGP71A2W012 or equivalent in Philips Cat No-915002621301/Crompton Cat No-LCSR-12-CDL.

S&F in repair MCB DB TPN (double door) 4 Ways, 415 Volts including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

S&F in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

S&F single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F in replacement MCB, single pole, 240 Volts, curve 'C' of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.

S&F in repair MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as specified and directed.

S&F in replacement isolator four pole 415 volts, 100 Amps, curve 'C' of breaking capacity 10KA complete all as specified and directed.

M&L for renewal of earthing complete with galvanised steel earth plate electrod 60cmx60cmx6mm thick burried directly in ground ( earth ) pit not less than 2.25mtr below normal ground ( level ) connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts nuts check nuts and washers of galvanaised iron or steel including PCC pit in 1:2;4 type B-1 RCC cover with suitable handle and angle iron 40x40x5mm frame, excavation and earth work in any type of soil, medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade protetion pipe 15mm bore upto main board complete as shown on electrical plate No 5 of MES Sch 1991 ( part-I) and testing and complete all as specified and directed.

M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand two single core 6 sqmm including 4 Sqmm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit all as specified.

M&L for wiring with two single core 4 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 4 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified and directed.

S&F LED post top lantern fitting 35 W IP 65 consisting of cast aluminium spigot complete with accessories for 35 watts LED, junction box, 50 mm dia GI pipe 'medium grade 0.5 mtr length with MS flat clamp including civil workcomplete all as specified and directed. Make havells cat no-RUBYPT35WLED757PSYMTOPC or euivalent of philips/CG

S&F 1100 volts grade heavy duty PVC insulated aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed 10 sqmm two core cable in service connection, suspended by insulated hanger not more than 1 m apart including 4 sqmm suspension wire one twin core cable flat or circular complete all as specified and directed.

M/S S S A ASSOCIATES

R P construction company

Abode Artisan Enterprises

M/S AADI ENTERPRISES

QUALITY CONSTRUCTIONS CO

M/s Bhadoria Associates