Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-AOC TOTA RAM KI DHANI BABAR MAGRA JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹47.9 L+₹9.7 L (25.3%)Rejected-Finance 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance Not being lowest | |
| 3 | Rejected-Technical 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | - | Rejected-Technical Rejected due to OVER LOADED and below one class |
Tender Value
₹48.3 L
EMD Value
₹96,600
Closing Date
20 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
SPL REPAIR TO BLDG NO. P - 344 AT CERTAIN UNIT AT MIL STN JAISALMER
2024_MES_659843_1
8371/24-25/E8
Open Tender
Civil Works
Item Rate
270 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹96,600
Yes
28 Nov 2024
14 Jun 2024
23 Jul 2024
14 Jun 2024
20 Jul 2024
5 Jul 2024
Amount
Taking down chowkhats or frame with shutters (w/o taking off shutters from the frame) n. exc 1.5 sq. m each complete all as specified & directed by Engineer-in-charge.
Taking down chowkhats or frame with shutters (w/o taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq.m each complete all as specified & directed by Engineer-in-charge.
S&F powder coated aluminium anodised frame for doors, windows and ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc complete all as specified & directed by Engineer-in-charge.
S&F powder coated aluminium anodised window and ventilator shutters, hung type without sash bar aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading, screws etc, complete all as specified & directed by Engineer-in-charge.
S&F powder coated anodised aluminium door shutters, aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips rubber neoprane packing, handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified & directed by Engineer-in-charge.
S&F Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified & directed by Engineer-in-charge.
S&F 5.5mm thick sheet glass, ordinary quality and glazing in squares not exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge.
S&F 100mm brass 4 Levers mortice lock vertical type complete all as specified & directed by Engineer-in-charge.
S&F in repair aluminium (Die cast) body door closer hydraulically regulated, desigantion No. 3, universal type, Suitable for door shutters of 851 to 1000mm in width and weight between 61to 80Kg complete all as specified & directed by Engineer-in-charge.
S&F 200 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in-charge.
S&F Pressed steel frames of size 105X 60mm and 1.25 mm thick for doors with double or single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified & directed by Engineer-in-charge.
S&F 35 mm thick factory made second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified & directed by Engineer-in-charge.
S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed by Engineer-in-charge.
S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & directed by Engineer-in-charge.
S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MSD square tube etc complete all as specified & directed by Engineer-in-charge.
S&F in repair factory made solid PVC moulded masonic door shutter 28 to 30 mm thick (style) with 2, 4, 6 raised panel design with 2 mm moulded PVC sheet on the front face and 2 mm moulded PVC sheet on back face supply and fixing in the frame at site as per specification with particle board core complete all as specified & directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed by Engineer-in-charge.
Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thick (below or above ground level) complete all as specified & directed by Engineer-in-charge.
M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in flooring complete all as specified & directed by Engineer-in-charge.
M&L for Non Skid ceramic tiles colour jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified & directed by Engineer-in-charge.
M&L for Glazed ceramic tiles light shade in vertical surface 450X300X7mm thick, jointless tile set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles laid over and including rendering 10mm thick as backing coat in CM (1:4) complete all as specified & directed by Engineer-in-charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified & directed by Engineer-in-charge.
M&L Machine cut kota stone slab flooring 20- 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including screed bed or bedding layer of 20mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.
All as per item No. 23.00 above but as in skirting, steps etc in vertical surfaces with 10mm thick rendering as in backing coat in CM 1:4 complete all as specified & directed by Engineer-in-charge.
M&L for granite slab of any type of 20mm thick machine cut bedded and jointed with grey cememt slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and plishing complete laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.
M&L sand stone slabs 5cm thick in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified & directed by Engineer-in-charge.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified & directed by Engineer-in-charge.
M&L Squared rubble walling jodhpur type, brought up to coursesd, well bonded, bedded solidly hearted & builted in CM (1:6) complete all as specified & directed by Engineer-in-charge.
Extra over Sand stone walling for hammer dressing to face stones and dressing of face beds and joints with maximum depression on face from straight edge held against the dressed surface not exceeding 20 mm, as specified, of squared rubble walling, brought up to courses complete all as specified & directed by Engineer-in-charge.
Material and labour for flush pointing to squared rubble mansonry, coursed or uncoursed in CM (1:3) complete all as specified & directed by Engineer-in-charge.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified & directed by Engineer-in-charge.
M&L for rendering 10 mm thick in cement mortar (1:3) on fair faces of concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth with out using extra cement complete all as specified & directed by Engineer-in-charge.
M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth with out using extra cement complete all as specified & directed by Engineer-in-charge.
M & L for Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new surface applying two coat of cement base paint over a coat of cement primer complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new surface applying two coat of oil bound distemper over a coat of primer including apply putty for uniform smooth surface complete all as specified & directed by Engineer-in-charge.
M & L for Preparation of old plastered surfaces of ceiling incl Complete removal of existing treatment and applying three coats of white wash complete all as specified & directed by Engineer-in-charge.
M & L for Preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion on surfaces of walls complete all as specified & directed by Engineer-in-charge.
M&L Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink prime complete all as specified & directed by Engineer-in-charge.
M&L Preparation of old wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint complete all as specified & directed by Engineer-in-charge.
S&F in repair vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect complete all as specified & directed by Engineer-in-charge.
S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long complete all as specified & directed by Engineer-in-charge. (Make:-Cera Cat part No B1010102 or equivalent in Appx 'C' list of makes.
S&F in repair MS powder coated drapery rod 25mm dia decorative manner all as per sample complete all as specified & directed by Engineer-in-charge.
S&F in repair Brackets powder coated fancy type for drapery rod complete all as specified & directed by Engineer-in-charge.
S&F steel water tubing 15 mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls and ceilings or laid in floors etc including taking down existing unserviceable pipe of any description complete all as specified & directed by Engineer-in-charge.
S&F steel water tubing 20 mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls and ceilings or laid in floors etc including taking down existing unserviceable pipe of any description complete all as specified & directed by Engineer-in-charge.
S & F in repair bib tap 15 mm dia cast copper alongwith crutch or butterfly handle screwed down CP fancy type 15 mm dia complete all as specified & directed by Engineer-in-charge.
S & F in repair stop valve 15 mm bore CP fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-charge.
S & F in reapir 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed to walls complete all as specified & directed by Engineer-in-charge.
S & F in reapir 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed to walls complete all as specified & directed by Engineer-in-charge.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. complete all as specified & directed by Engineer-in-charge.
S&F in repairs CP waste coupling 32mm for kitchen sink/Wash hand basin complete all as specified & directed by Engineer-in-charge.
S&F in repairs PVC waste water pipe for WHB of size 32 mm dia and 60 cm long including coupling complete all as specified & directed by Engineer-in-charge.
S&F 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion including taking down of old unserviceable water storage tank complete all as specified & directed by Engineer-in-charge.
S & F 1000 litres capacity Three Layers White colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old PVC tank incl dismantling of water tanks and removing to store (exc500 and not exc 1000 ltr cap) complete all as specified & directed by Engineer-in-charge.
S&F Ball valves high pressure of 20 mm dia PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified & directed by Engineer-in-charge.
S&F in repair wash hand basin table top vitereous china size 550 x 400 mm white incl CP waste coupling waste pipe brackets complete all as specified & directed by Engineer-in-charge.
S & F Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified & directed by Engineer-in-charge.
S&F in repair 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified & directed by Engineer-in-charge.
S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed by Engineer-in-charge.
S & F in repair PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified & directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.
M&L Mild framed works such as angles, tees , channels, etc as in fenching posts large and small gates and grills , gratings and chainlink fenching etc, including hanging gates in pillar with proper pintle hinges, stops, hand made sliding bolts ,etc complete all as specified & directed by Engineer-in-charge.
M & L for MS props erecting for temporary supports to the structural members like beams, slabs etc. to relieve the load on the members during breaking of damaged concrete, removal guniting, excavation or any dismantling work as per the instruction of engineer in-charge. These supports shall be provided either in the form of props or trestles fabricated using structural steel as per the site requirements complete all as specified & directed by Engineer-in-charge.
M & L for Chipping of slab/ columns/ beams/ chajjas/ parapet/ roof projection/ balcony/ staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minimum of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brushes etc and disposal of debris all lead and lifts, complete all as specified & directed by Engineer-in-charge.
M&L for cleaning & applying rust remover (CICO Clean-o rust) in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 6-8 sq. mtr/ltr not less than 50 microns dft with CICO ZINCILATE-500 or equivalent to reinforcement surface as per manufacturer’s instructions including all scaffolding , machinery, tools tackles and clearing of debris. Make: CICO clean-O-rust, CICO ZINCILATE-500 or equivalent in Appx 'C' list of makes.
M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-charge. Note : Additional Reinforcement: Check the diameter of the existing rebars and if the diameter is less than 30% of the original diameter, provide additional reinforcement. Cut 12mm dia bars as main reinforcement to the required length with proper development length. Tie them to the prefixed shear connectors so that the additional rebar acts monolithically with the existing ones and core concrete.
M&L mild steel TMT bars 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-charge. Note : Additional Reinforcement: In the case of the shear reinforcement also, if the diameter of the rebars are reduced, provide 8mm dia stirrups in the form of 2 "U" shaped bars. Tie them properly so that it has a tight contact with the main bars.
M&L for shear connectors by drilling 12mm dia holes up to a depth of 75mm maximum and fixing 8mm dia L shaped anchor rods as shear connectors at every 300mm c/c on the surfaces of the columns/beams or any other structural member as the case may be. Clean the same using air or blower and make sure that there are no fine particles present in the hole and filled the holes with one or two component styrene free vinylester resin anchor or two components, styrene & cement free epoxy- acrylate fixing and anchoring compound. At this stage push the shear connector gently in to the hole and finish the excess resin which comes out of the hole and allow the shear connectors not to be disturbed for Minimum 20 minutes complete all as specified & directed by Engineer-in-charge. Make: CICO RESIFIX-G or equivalent in Fosroc lokfix/Hilti and Master builder (BASF) Note : Reinforcement shall be paid separately under respective of Sch 'A'.
M&L for hard drawn steel wire fabric n exc 4Kg/Sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement complete all as specified & directed by Engineer-in-charge.
S & F of anchor grout & providing new steel or rebars by drilling holes with 10 mm to 20mm dia and 100 to 200mm deep as per IS code of 10D formula and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with one or two component styrene free vinylester resin anchor or two components, styrene & cement free epoxy- acrylate fixing and anchoring compound ( having the technical parameters mentioned in material specifications) using standard sealant applicator gun after drilling holes of required diameter at required locations, for holding / fixing / placing in position the steel mesh reinforcement at desired level/ stretching complete all as specified & directed by Engineer-in-charge. Make: CICO RESIFIX-G or equivalent in Fosroc lokfix/Hilti and Master builder (BASF) (Note : Steel/reinforcement shall be paid and measured separately) .
M&L for providing leak proof shuttering in any position cut to length and providing including runners supports as per manufacturer’s instructions and including machinery, tools tackles and men materials complete all as specified & directed by Engineer-in-charge. Note :- Scaffolding charges shall deemed to inclusive of quoted rate for respective items of this schedule.
M&L for providing Micro concrete with CICO MICROCRETE at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine etc complete all as specified & directed by Engineer-in-charge. Make: CICO MICROCRETE of CICO Technologies ltd or equivalent in Fosroc/STP/BASF
M&L for applying to the damaged concrete portion of slab/columns/beams/chajjas/parapet /roof projection/balcony/ staircase with single component, fiber reinforced, dual shrinkage- compensated thixotropic, cementitious ptch repair mortar CICO Repocem PM (having the technical parameters mentioned in material specifications ) capable of applying up to 20-25mm thick in double layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness and Equivalent of Fosroc Renderoc/STP/BAS
M&L for rendering 15 mm thick on concrete surface in cement mortar 1:4 including water proofing compound and finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-charge. Note : WPC to be paid separately under item Ser No 86 as supply only.
Supply of liquid integral waterproofing compound @ 100ml/per 50kg cement used complete all as specified & directed by Engineer-in-charge. Note : WPC to be used in rendering by mixing under item Ser No 11 & 12 above.
M & L for the surfaces which are to receive the coating or treatment, must be free from oil, laitance, grease, wax, dirt or any other form of foreign material adhering on it before the waterproofing job started. Dust free the surface, including removing of existing treatment/ old felt / loose plaster / concrete etc. and repair with polymer mortar by adding bonding agent (SBR). Repairing of slab, parapet wall junction, cracks and other large blowholes by open in “V” shapes & filling by polymer mortar or putty followed by fiber mash tape with SBR in conjunction with cement complete all as specified & directed by Engineer-in-charge.
CEMENTITIOUS ELASTOMERIC SLURRY COAT: M & L for water proofing treatment on roofs of slabs by complete removal/taking down of existing treatement, by applying acrylic based polymer modified cementitious elastomeric flexible composite coating system consisting of applying: First coat applying with CICO TAPECRETE-P151 or equivalent in FOSROC/STP/SIKA/BASF, mixed with neat fresh cement in the ratio of 1:1 by weight after dust free and moist the surface. Laying second layer of Fiber glass cloth of 45 GSM when the first layer is still green. Overlaps of joints of fiber cloth should not be less than 10 cm. Applying final layer of cementitious elastomeric flexible composite coating system. The whole terrace so finished shall be flooded with water for a minimum period of 24 hours for curing and for final test. “All above operations to be done in order by the manufacturer's authorised applicator only.
HIGH BUILD ELASTOMERIC LIQUID MAMBRANE (PU BASED): M & L For applying of polyurethane based tar extended seamless elastomeric protective coating system, conforming to ASTM C-836-03 and ASTM C 898-09 ideally suited for waterproofing of roof, walls and foundation MAKE: CICO CORCHEM 206I or equivalent in FOSROC/STP/SIKA/ BASF, following the single component solvent based polyurethane compound CORCHEM 2P or equivalent in FOSROC/STP/SIKA/BASF recommended to be used as a primer before application of CORCHEM.
Providing and applying fibre reinforced elastomerlc liquid water proofing membrane with resilient acrylic polymers having Sun Renectlvlty Index (SRI) upto 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self priming of elastomeric waterproofing liquid (dilution with water In the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. Make: CICO Thermoseal XL or equivalent in MYK arment, BASF,Fosroc
Note for item No. 69 to 83 :- (i) The structural rehabilitation treatment shall carried out by the authorized applicator only. (ii) Contractor have to get prior approval of applicator or authorized agency by submitting its authorization letter to this office for approval prior to commencement of work. (iii) Th contractor shall submit guarantee for water proofing treatment work after completion of work. (iv) The cost of Scaffolding work required at certain places deemed to included in the quoted rate of respective items. No extra shall paid for the same.
Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified & directed by Engineer-in-charge.
M&L Point wiring used approved colour coding as per IS (Red, Black and Green) for single phase circuits), with multi-stranded copper conductor 1.5 sqmm nominal cross -sectional area, single core, PVC insulated and unsheated FRLS cable 1100 volts grade, ISI 694 marked with valid CML No. in and including medium grade, PVC concealed conduit MMS, ISI marked of dia not less than 20 mm and conduit accessories conceled in wall/roof/floor etc, ISI marked with valid CML No. (IS-9537 - 1983 for condits and IS : 3419 - 1976 for conduit accessories) with terminated to new pressed flush metal boxes readily available cover with outer plates inner plates et, suitable for mounting modular type switches, socket fan regulator etc PVC insulated multistanded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- Note : Modular switch and socket shall be measured and paid separately.Make: Polycab/Havells
One light point controlled by one switch
One ceiling/exhaust point controlled by one switch
One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per item No 84.00 here on before but with copper conductor cable of nominal class area 2.50 sq mm for phase, neutral & earth for One 2/3 pin socket outlet 5 Amps on independent board complete all as specified & directed by Engineer-in-charge.
All as per item No 84.00 here on before but with copper conductor cable of nominal class area 4.0 sq mm for phase, neutral & earth for power socket point 15 Amps complete all as specified & directed by Engineer-in-charge.
S& F modular switch one way 6A, 1 module complete all as specified & directed by Engineer-in-charge.
S&F modular socket 6A-2/3 pin combined 2 module complete all as specified & directed by Engineer-in-charge.
S&F modular switch socket combined 6A/16A , 6 pin, 3 module complete all as specified & directed by Engineer-in-charge.
S&F step type modular fan regulator 120W -2 module ISI Marked with valid CML No complete all as specified & directed by Engineer-in-charge.
S&F Ceiling rose, three terminals PVC/polycorbonate, isolated body complete all as specified & directed by Engineer-in-charge.
S&F vertical DBs TPN 4 way 415 V double door powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 250 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required,suitable for MCCB TP/FP as incomer and MCB SP/TP as outgoing with and including MCCB 250A 25 KA, 415 V including taking down existing unserviceable DBs of any description complete all as specified & directed by Engineer-in-charge.
S&F sheet metal enclosure double door MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts IP 43 Protection double door with magnitic locking system complete including taking down existing unserviceable sheet metal enclosure of any description complete all as specified & directed by Engineer-in-charge.
S&F for MCB DB SPN 12 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall including taking down existing unserviceable MCB DBs of any description complete all as specified & directed by Engineer-in-charge.
S&F MCB's TPN 63 Amps, 415 Volts, 10 KA 'C' curve including taking down existing unserviceable MCB TPN of any description complete all as specified & directed by Engineer-in-charge. Note : MCB TPN rating ICS =100% ICU
Supply and fixing MCB's single pole and neutral 63 Amps, 240 Volts, 10 KA rapturing capacity 'C' curve including taking down existing unserviceable MCB SPN of any description complete all as specified & directed by Engineer-in-charge.
Supply and fixing MCB's single pole 10 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve including taking down existing unserviceable MCB SP of any description complete all as specified & directed by Engineer-in-charge.
M&L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) concealed conduit circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 10.00 Sqmm (FRLS) in conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 10.00 Sqmm (FRLS) of continous earth wire green in colour including taking down existing unserviceable submain wiring of any description complete all as specified & directed by Engineer-in-charge. Note :- Two runs of 10.00 Sqmm cable & one run of 10.00 Sqmm cable as earth wire and one run of PVC conduit shall be measured and paid as one unit length.
M&L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) concealed conduit circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour including taking down existing unserviceable submain wiring of any description complete all as specified & directed by Engineer-in-charge. Note :- Two runs of 6.00 Sqmm cable & one run of 6.00 Sqmm cable as earth wire and one run of PVC conduit shall be measured and paid as one unit length.
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp as incomer including taking down existing unserviceable earth plug of any description complete all as specified & directed by Engineer-in-charge.
Supply and fixing in repair of LED building security light fitting 35 Watt (or above) 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with electronic driver including thermal management in multiple optics complete with IP 65/66 protection complete with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge.
S&F bracket of GI pipe light grade of 40mm dia, 1.2 meter in length clamps made of FI 40 mm x 6mm incl nuts, bolts & washers, painting and including taking down existing bracket complete all as specified & directed by Engineer-in-charge.
S & F in repair of surface and wall mounted LED tube light along with fixture ,4 ft ,20W ,extruded aluminium housing provided for efficient heat disspation with polycarbonate ,operating voltage 240 V ,50HZ ,AC supply and operating tempureture 0 to 50 C ,power factor >0.9 ,lumen output > 2000 and provision of new 3 core multistanded copper conductor of size 23/0.193 from ceiling rose to fitting with white colour flexible pipe complete all as specified & directed by Engineer-in-charge.
S & F in repair of LED tube light fitting 10 watt tube LED Neutral worm in colour, 600 mm in length wall mounted LED batten,extruded aluminium heat shink provided for efficient heat dissipation & integrated electronic driver,optic diffused type including all electric connection with whilte flexible cord 1.50 Sqmm 3 core as required complete all as specified & directed by Engineer-in-charge.
Supply and fixing in repair of recessed/ ceiling mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas Brilliance 36watt LED, size 2ft x 2ft The product features color tuning up to 3000 K, necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified & directed by Engineer-in-charge.
S & F for LED down light recess mounted/ Surface mounted/POP mounted or as per site requirement, square/round type worm white or 3000 K as per user requirement 18 watts with efficiency of 100 lumens per watt, in worm white/ neutral white as per site requirement sleek design aluminium housing polycarbonate diffuser white finish operating voltage from ceiling rose to fitting complete all as specified & directed by Engineer-in-charge.
S & F recess mounted/Surface mounted/ POP mounted or as per site requirement LED down light 6 Watt round/Square in shape worm white or 3000 K as per user requirement Ideal for wardobes, furniture lighting, display & interior decoration complete all as specified & directed by Engineer-in-charge.
S & F for LED post top lantern/gate Light 40 watt light fitting 3000 K made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories including removal of old unserviceable complete all as specified & directed by Engineer-in-charge.
S & F decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for worm white LED bulb and provosion of LED bulb 15 watts complete all as specified & directed by Engineer-in-charge.
Taking down ceiling fan/ exhaust fan of any sweep, dismanting blade and including preparation, filling cavity applying one coat of synthetic enamel paint by spraying with machine, re-assembling the fan body to fan and re-fixing in its original position or any other position complete all as specified & directed by Engineer-in-charge. Note :- Rate quoted by the contractor shall deemed to inclusive of replacing of quarter pin, nut bolt with check nut, rubber real etc.
S&F Steel body heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified & directed by Engineer-in-charge.
S&F fans ceiling fans complete with three blade, down rod, accessories 230 V, 1200 mm sweep colour with squirrel cage induction motor necessary connecting cable complete all as specified & directed by Engineer-in-charge.
Supply & fix water heater storage type (Geyser) vertical type ,inner container of capacity 50 ltrs, power Consumption 2.0 KW, BEE 5 star rated pressure rating >8 Bar electrically operated ,AC 230 Volts ,including as per site required Nos of fashner nuts required suitable size fixed in brick wall complete all as specified and directed .BEE 5 star rated.Make: Havells Cat pot No : Monza DX GHWAMGSWH050 or in equivalent Appx 'C' list of makes.
Supply and fixing in repair of PVC insulated copper conductor 2.5 sq mm 3 core in PVC conduit medium grade in ground/surface with necessary fixing arrengment and connecting items complete all as specified & directed by Engineer-in-charge.
M&L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized wire 4.00 mm as earthing lead up to 7.5 mtr by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and taking out carefully copper/GI earthing complete including GI pipe with Cu/GI strip and removing materials for taking credit and making good disturbed surface complete all as specified and directed.
NOTE FOR ITEM No. 118.00 [i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing wire from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.
S&F GI tubing light grade 40 mm dia for earthing strip protection including taking down existing unserviceable strip complete all as specified & directed by Engineer-in-charge.
M&L for Earth continuity strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to DBs or any other indicated situation for loop earthing with galavanised iron wire of 4 mm size complete all as specified & directed by Engineer-in-charge.
GEMRARAMCONTRACTOR (BID ID -3067216)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .