Maintenance Repair works ICDS No-33623030119 at Panthalkudi, Sellur water tank in ward no. 28

Amount

Clean removal of cement plaster from walls,. etc complete

Dismantling, clearing away and carefully stacking materials useful for reuse for Pressed tiles & weathering course

Dismantling, clearing away and carefully stacking materials Floor finish and dadooing walls in Cement Mortar with mosaic tiles/ glazed tiles/ cuddapah slabs.

Dismantling, clearing away and carefully stacking materials useful for reuse for Existing Brick / stone masonry in Cement mortar walls under 3 m high.

Brickwork in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X 4 3/8"X2 3/4" including finishing, curing, etc., complete complying with standard specification.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting wall surface with two coat of Synthetic Enamal paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wher ever required etc, complete as per standard specification.

Painting two coats with approved black oxide for Old Black board over the cement plastered surfaces

Painting with Ready Mixed Enamel Paint over the old Iron works of approved quality and colour with priming coat including the cost all materials etc.,complete, in all floors.

Plastering with cement mortar 1:3, 20 mm ,thick in allfloors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.-1 m 3

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Wiring with 2 x 4 sq.mm. (56 / 0.3mm) PVC insulated single core unsheathed copper cable conductor cable of1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling ith MS accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection by 14 SWG TC wire for open power plug point

Supply and Fixing 4 FEET LED FITTING - HIGHER END

AC Ceiling Fan complete 1200 mm (48") Sweep with 300mm Down Rod (without Regulator)

Supply PVC 110mm Pipe

Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type)

Supply and Fixing HDPE tank 1000 liters

Construction of Inspection Chambers of following sizes with earth work for foundation with 25cm thick brick jelly cement concrete bed in C.M 1:4:10 using 40mm brick jelly for foundation brick work in C.M 1:6 for chambers, plastering with C.M 1:3 12mm thick benching, channelling, 75mm thick RCC loose slab covering in CM 1:2:4 mix using 20mm blue granite jelly including necessary reinforcement etc complete.

Supplying and laying Rubberised inter locking Paver block M40 grade 80mm thick high strength type conforming IS15658-2006 of rubberized inter locking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make tobe laid in flurring bone pattern with stone dust cushion below the uniform shap of approved nonskitting surface in the top and the rate including levelling the base preparation of pavers as subbase, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers, sweeping tranporting loading unloading of laying paver block as per standard specification,.

Add GST 18%

S RAMANATHAN (BID ID -1284772)