REPAIRS TO FLOOR, WALLS, PLASTERING, PLINTH PROTECTION, JOINERY, CEILING, SANITARY FITTINGS ETC AND PERIODICAL SERVICES AT MAYABUNDER UNDER GE(SOUTH) DIGLIPUR

Taking down cement plaster of any description on brick or stone walls from any height including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4, on fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6, on other than fair faces of brick or concrete surfaces walls/ceilings, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3, on ceilings of concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L for wall care putty on plastered surfaces of wall complete all as specified and directed.

M & L for applying two coats of 100% Premium acrylic emulsion paint over new surfaces of walls having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

M&L for distempering over new surfaces of ceilings two coats over and including priming coat of exterior primer with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

Complete removal of existing treatment from external surfaces of walls thoroughly by machine grinding, scrapping, rubbing/wire brushing, sand papered and watering with jet etc., and applying two coats of weather proof anti fungal exterior acrylic emulsion paint (100% acrylic), premium quality, over a coat of primer all as per manufacturer's instruction complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls, ceilings, cornices, soffits of slabs and chajjas fins and facias etc., and applying one coat of weather proof anti fungus exterior acrylic emulsion paint (100% acrylic), premium quality all as per manufacturer's instruction complete all as specified and directed.

M&Lfor preparation of old plastered surfaces of wall surfaces including cornices, pilasters etc., and applying one coat of oil bound distemper complete all as specified and directed.

All as per item no 10 above but on ceilings.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparing the surfaces and Painting one coat on floors with ready mixed paint, for use on floors complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in plinth protection, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin white 580 x 450mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of suitable size complete all as directed

S&F in repairs, plastic water closet seat cover, white, closed pattern with recessed bottom and cover aluminized hinging device complete all as specified and directed.

S&F in repairs, chromium plated towel rail 20mm dia, 'D' type, 600mm long, premium quality complete all as specified and directed.

S&F in repairs, chromium plated towel ring complete all as specified and directed.

S&F in repairs, glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs, 32mm dia PVC flexible waste pipe with fittings of suitable length as per site requirement for WHB/Sink or urinal complete all as specified and directed.

S&F in repairs, 32mm dia brass chromium plated waste coupling fittings for wash hand basin etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs, 16mm outer dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repairs, 20mm outer dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repairs, 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.

S&F in repairs, 125mm size chromium plated shower rose with or without swivel joint complete all as specified and directed.

S&F in repairs, chromium plated Hand Shower (Health Faucet) with 8mm Dia 1.2meter long flexible tube and wall hook complete all as specified and directed.

S&F in repairs, 500 litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.

S&F in repairs, 1000 litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.

S&F in repairs, 20mm dia PP-R Gate valves (brass insert) gate valves , ISI marked screwed both ends for pipes and fixed complete all as specified and as directed.

S&F in repairs, complete PVC assembly kit suitable for PVC low level flushing cistern 10litres capacity of any make complete all as directed.

S&F in repairs, PVC flushing pipes with coupling suitable for low level flushing cistern complete all as directed.

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs, Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. Note: Size of grating shall be as per site requirement.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Plain, galvanised mild steel sheeting with grade of zinc coating 275, 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed.

S&F in repairs, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F in repairs, 100mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F in repairs, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs, 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs, 200mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repairs, Butt hinges 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F in repairs, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repairs aluminium body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs all as specified and directed.

S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs neoprene/ EPDM beadings for glass fixed in alumium doors/ windows complete all as specified and directed.

M&L, preparation of old concrete surfaces by brushing, cleaning and washing all the undulations, cracks, cleaning all pores and sealed with PU sealant or crack seal properly and applying first coat of PU Magnum @ 750gram/sqm over a coat of epoxy primer @ 200ml/sqm, laying 30-40 GSM Geotextile with 50mm side and end overlaps on the layers, applying second coat of PU Magnum over geotextile @ 750grams/Sqm complete all as per manufacturers instructions and as directed.

S&F in repairs glazing bead for aluminium windows/ doors complete all as specified and directed.

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.

Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.

S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.

S&F, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F, 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames, glazed with putty or fixed with beads, complete all as specified and directed.

S&F, 4mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Supply and fix Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

M&L for 30mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in flooring, finishing the surface even and smooth using extra cement including necessary formwork complete all as specified and directed.

M&L for light coloured vitrified tiles in floors of size 600 x 600 x 9 to 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE.

M&L for 9 to 10mm thick light coloured vitrified tiles in skirting of size 600 x 100mm height, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

Demolition of stone slabs, tiles, cement concrete tiles/paver blocks of any description or thickness in floors, laid and bedded in any mortar including disposal of debris off the premises complete all as specified and directed.

M&L for 18 to 20mm thick, approved machine cut, coloured Granite, factory polished, edges rounded in steps, cooking platform and the like laid over and including screed bed or bedding layer 20mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed.

M&L for 12 to 18mm thick machine cut coloured granite, factory polished, in wall lining, (veneering to wall) over 10mm thick backing coat in cement mortar 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified and directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions