Civil works for refurbishment of NC II shop at Mechanical Factory HAL Lucknow

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC for the said work shall be 995419

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2022 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.188360.00

Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of Items

Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead or as per direction of EIC in factory premises etc all complete as required and directed by EIC.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.c.,including Dewatering if required ( including Providing and removing timbering as planking, shuttering and raking shores wherever required) etc., Complete as per specification, drawing and as directed by Engineer in charge.

Providing & laying PCC: 1:4:8 (1 cement: 4 coarse sand : 8, 40 mm size graded stone aggregate) in foundation, under floors or any other similar description of works, with mechanical mixing including necessary form work/shuttering, compaction, curing including, materials, labour, T&P etc, required for proper completion of the work as per specification & direction of EIC.

Providing and laying Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). including compaction, curing including, materials, labour, T&P etc, required for proper completion of the work as per specification & direction of EIC.

Providing & laying cement concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregat 20 mm nominal size of Bahratcoop/Dala/Jhansi) in super structure i.e. above plinth beam eg. column, slab, beam, lintel, chajja, fascia , circular column / structure, etc or any other similar description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc all complete as per direction of EIC.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete etc work upto plinth level etc all complete as required and directed by EIC.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc all kind of works in superstrucure / above plinth level etc all complete as required and directed by EIC.

Providing and laying Thermo-Mechanically Treated bars of grade Fe-500D or more of make RINL/SAIL/TISCON or equivalent as approved by EIC, of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, T&P, wastage etc. all complete at any height as per drawing, specification and direction of E.I.C.

Providing and laying class 'A' old size brick (having crushing strength 100 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) in foundation and superstructure, walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per direction of EIC.

Providing and fixing 30 mm thick flush door shutter including ISI marked Stainless Steel butt hinges with necessary screws ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, cutting wastage etc all com plete as reqruied and directed by EIC.

Providing and fixing bright finished brass tower bolts (barrel type) 250 x 10mm with necessary screws etc. complete of approved make, design, pattern etc by EIC.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete of approved make, design, pattern etc by EIC.

Providing and fixing 125mm chromium plated brass handles with necessary screws etc. Complete of approved make, design, pattern etc by EIC.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. Complete of approved make, design, pattern etc by EIC.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.. at any height including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Providing & fixing 4 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, ventilators , all complete with of approved make, design, pattern etc by EIC.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts with Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides etc all complete as required and directed by EIC.

Proviing and laying Dark shade pigment using ordinary pigmented cement Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including cutting, wastage, laid in requried gradient, etc all complete as requried and directed by EIC.

Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls of rough / fair faces of brick wall / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per direction of EIC.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour : including surface preparation, making surface smooth and even and labour, material, scaffolding, T&P etc all complete as per direction of E.I.C.

Finishing walls with ready mixed Premium acrylic emulsion paint for exterior surface (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives of approved make and colour pattern. - New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm etc all complete as requried and directed by EIC

Providing and applying two coats of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian / Shalimar / Berger of approved tint and shade over a coat of suitable primer for respective surface primer of above brand ,including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching including labour material T&P, wastage etc all complete as per specification & direction of EIC.

Preparation of surface with applying average 1mm thick approximately birla putty before applying painting on wall including sand papering for smoothing of surface to achive even surface with all labour material T&P etc.all complete as per specification and direction of E.I.C.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. The sample shall be approved by EIC.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Dismantling roofing Asbestos Cement sheet / GS / all type of roof including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of etc all com plete as reqruied and directed by EIC.

Providing and laying 02 mm thickm heavy dutyn homogeneous , heavy duty industrial use and flexible non directional multicolour polymer chips , PUR surface protection , homogenous flooring rolls in width of 02 Mtr and contineous lenth of 20 mtrs laid in floors / skirtings , surface , electrical resistance of 100 Ohmsto 1000 Ohms and in approved design and shade as per the design of approved amake such as Adventus series of Wonder floor/ Armstrong/ Responsive SPICS RQ brand or as per approved by EIC make conforming to IS standerds in rolls from the suitable adhesive and joints thermo welde to form seam less surface including cited place, including removing of existing PVC/ESD flooring and deposited the same as directed place , cleaning of wsurface and preparation of surface to receive the floor , fillling of minor pits/ holes if any withn Birla putty/ cement mortaretc. including cost of all material, labour, wastages , T&P etc. complete as required and as directed by EIC.

Providing & fixing at all heights, 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).

Providing and fixing Gutter (600 mm over all girth) precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete.

Providing & fixing 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.

Providing and fixing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and laying 03 mm thick Epoxy flooring of Xchem Polymer/ Enipoxy / RBS TECH or as approved by EIC as per the following method 1.Surface Preperation: (a)The entire surface to be treated should be clean and devoid of any foreign material which may effect the bonding of the Epoxy flooring. A heavy duty Floor grinder to be used to remove all/any existing paint epoxy to expose the original slab/floor (b) After the Grinding the entire surface should be made devoid of any dust ,preferably with a vacuum cleaner/Blower. 2. Floor Repairs with Epoxy Mortar. Epoxy Primer Application (a) On the well prepared surface apply Epoxy Primer @ 100-125gms depending on the sustrate and porosity. Allow it to dry. 3.Providing and Laying 2 mmEpoxy Self Levelling Screed (a) Mix the entire contents of screeding with a Slow Speed Drill(350- 400RPM) with paddle arrangement.On the well treated primed surface apply Self levelling Epoxy Screed to a thickness of 2mm with a Notch trowel and spread evenly on the entire surface. Once laid, use a spike roller and Roll the surface with a back and forth motion . This activity will help remove any entrapped air from the system. Avoid excessive rolling as once material starts gelling , it may leave Spike Marks on the surface. Once done allow it to dry for min 24-48 Hours subject to ambient cnditions...

Making the opening in brick masonry For door/ window/ clerestory window including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener / SS screws of required dia and size etc

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

--do all as above item no. 28 but For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the costof EPDM rubber / neoprene gasket required including fittings, handles, hinges, locking arrangement, interlocks for door shutters, etc all complete, (Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing glazing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in PVC / aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket, cutting wastages etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved etc as directed by EIC.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 size 300 x 600 or 300 x 450 or as per site requirement and approvedby EIC. (thickness to be specified by the manufacturer), of approved make eg somany, kajaria, jonson, orient bell etc, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including all kind of cutting, wasatge, etc all complete as requried and directed by EIC.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Providing and laying flamed / glossy finish Granite stone flooring, wall/ column cladding, planters etc finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent as approved by EIC etc in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Providing and laying Vitrified tiles, double charged polished / mat finish, in floor in different sizes Size of Tile 600 x 1200 mm or as per site requirement of approved size by EIC .(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer eg Somany, Kajaria, Jonsin, Orient bell or as approved by EIC etc in all colours and shade, pattern laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily etc all complete as required and directed by EIC.

Above