Supply and fabrication of steel weld mesh and rolling shutter arrangements at Aanaikaranpalayam Material Recovery facility centre at ward no 46 in Kumbakonam city Municipal corporation

Amount

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc,complete as per standard specification

supplying,fabricating,erecting structural work of WELD mesh including MS channels,angles and round bars etc confirming to IS painting all labour charges etc complete

Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers

Supply and fixing of MS ventilator using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30.-

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). TNDSS NO.86 K, 86 A

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Painting two coats over new iron work for doors , windows and ventilators iron bars weld mesh wire mesh screen, steel bars flats and other similar works etc., with two coats of approved first quality of synthetic enamel paint over the existing tred oxide primer in all floors The rate inclusive of cost of all materials and labour brushes and scaffolding charges etc., complete complying with standard specification.(The paint should be got approved by the Municipal Engineer before use on work)

Wiring with 1x1.5 Sq.mm [22/0.3] PVC insulated SC unsheathed Cu Conductor of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T.switch with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light point as per standard specification,. SD22.

Wiring with 2x1.5 Sq.mm [22/0.3] PVC insulated SC unsheathed Cu Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T.switch with CS plug with continuous earth wire connection of 14 SWG TC wire and making good of concealed portion open plug point as per standard specification,. SD38

Supply and fixing of 4'40 W twin box type flu. Fitting complete with copper choke and condensor with conduirt pipe suspension from ceiling with PVC unsheathed Copper leads from terminal to the fitting with flu. tubes etc., comlete as per standard specification SD88

Supply and fixing of bulk head fitting complete with copper choke and condensor with conduirt pipe suspension from ceiling with PVC unsheathed Copper leads from terminal to the fitting with flu. tubes etc., comlete as per standard specification SD88

Supply and fixing of LED IS brand L as per (Philips / Bajaj /crompton / K. Lite) suitable for11W CFL lamp with CFL as per SD- 83.

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains, cost including all costs etc,., complete as per standard specification. SD 65

Supplying and fixing in position of white glazed Indian type water closet of size 58 mm (23") with "P" or "S" trap with foot rests, set with sand cushioning and forming flooring alround the water closet using 40 mm broken brick jelly in lime concrete 1:2:4 mix, 10 mm thick and plastering in CM 1:3 mix, 20 mm thick and giving necessary connecting to stoneware pipe etc., complete as per standard specification

Supply and fixing of PVC pipe and specials, Electrical materials etc., complete as per standard specification

32mm dia PVC pipe of 10kg/c.m2

32mm size PVC elbow

32mm size PVC Tee

110 mm dia pvc pipe

110 mm dia pvc elbow with door

Suppling and fixing in position 15mm diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Supply , Delievery and laying of PVC pipes and specials including cost and conveyance and all other incidental charges etc complete as per std. specifications.

25 mm dia pipe

25 mm dia PVC bend

Supplying and fixing of rolling shutters shall be pull and push type (Gear operated) made of 18G/3" lathe sections which consist of five main parts such as curtain, lock plate, guide channels rollers and hood cover. These five main parts are made out of special components detailed below: curtain shall be of 18G/3" lath sections cut to required size and filled with heavy cast iron / MS clips. For 8'0"(2.45m) high rolling shutter lath sections provided shall be not less than 37 numbers. Lock plate shall be 10GMS sheet and attached to the side brackets with 20mm square bar.Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high carbon coil springs. 2 springs shall be supplied. Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high arbon coil springs - 2 springs shall be supplied. Hood cover shall be of 0.8mm CRCA sheet reinforced with 25mmx25mmx3mm MS angle or gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer etc., complete.

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Brick Work in CM 1:5 (One part of cement & five parts of M - sand) mix using Third Class Country Brick Kiln Burnt bricks 8 ¾ " x 4 ¼ " x 2 ¾" including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:31

Plastering with CM 1:5 (One part of cement & five parts of P - sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57

Painting two coats with approved First quality plastic emulsion paint over cement plastered wall surface and ceiling including cost of one priming coat, Cost of all materials, all labour charges, brushes, cleaning preparing the surface,scaffolding charges and curing charges etc., complete cost including all costs etc., complete as per standard specification.

M Kalidasan (BID ID -1104881)