Construction of water supply Scheme with 1.0 HP DC Solar motor pump complete set 300 mm x 125 mm x 90 m deep GPT Bore Well for under Nagar Parishad Sahibganj Area in the state of Jharkhand, Based on SOR wef 1 June 2022

Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I(vide classification of soil item -B) Foundation for Steel structure staging 4 nos x 1.10m x 1.10m x 1.45m = 7.01 m3 1nox1.10mx1.10mx1.45m=1.75 m3 Foundation for Solar panel BCD (5.1.1+5.1+2)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume) Foundation for Steel structure staging 4nosx1.10mx1.10mx0.08m=0.38m3 Foundation for Solar panel 1nox1.20mx1.20mx0.10m=0.144m3 BCD (5.1.10)

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I 4nosx1.10mx1.10m=4.84 m2 Foundation for Solar panel 1nox1.10mx1.10m=1.21m2 BCD (5.6.1)

Providing nominal mix PCC M-150 of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I Foundation for Steel structure staging 1x2.50mx2.50mx0.10m=0.63 m3 Foundation for Solar panel 1nox1.10mx1.10mx0.10m=0.121m3 platform 2.5*.61*0.2=0.3 BCD 5.3.1.2)

Providing RCC M-20 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I. (a)Foundation for Steel structure staging Footing and Vertical Pedestal Raft (BCD-SOR-5.3.1.1) (1x2.335mx2.335mx0.25m)=1.36 m3 4nosx0.50mx0.50mx1.00m =1.0 m3 Footing (BCD-SOR-5.3.1.1) 1nox0.90mx0.90mx0.25m=0.202 m3

Providing RCC M-20 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I. Column (BCD-SOR-5.3.2.1) 4nosx0.35mx0.35mx1.5m=0.74 m3 Tie Beam 4nosx0.30mx0.30mx1.085m=0.39 m3 Vertical Pedestal 1nox0.30mx0.30mx1.35m=0.122m3

Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I (a)Foundation for Steel structure staging As per Item-5, Total quantity of RCC=3.04m3 Total quantity of Steel @ 120.00 kg/m3 =3.04m3x120.00 kg/m3=364.80kg or say 0.36

Providing structural steel galvanised squre pipe section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete.

Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete (MJP 2019-2020 Sec F Item 6)

Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres Capacity Water storage Tank(DWSD. Item No-01 M)