Emergent work of Re-development of Entire Kitchen Units of all the Judiciary Quarters at Carmel, Hazaribag

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.1 For thickness of tiles 10 mm to 25 mm

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and laying 6mm precast white glazed tiles in wall do ---do all com job.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge.

Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 9.127.1 1.5 mm thick

Marble stone flooring with 18 mm thick marble stone Udaipur green marble(sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar (1: 4) laid and jointed with grey cement slurry including rubbing and polishing complete with :

Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.

Providing two coats plastic emulsion paints over new work do ---do all com job.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete

S/F/F of following bath room fittings all com job. (iv) Bib cock long Thread

(ii)Pillor cock Long neck

Providing and fixing CPVC pipes all com job.insides 15 mm dia

20 mm dia

Providing and fixing pvc Rain water PVC pipes do---do all com job. (a) 110 mm dia

(b) 75 mm dia

Providing and fixing pvc pipes fittings all com job. 110 mm bend

75 mm bend

Suplying and fixing of following size PVC counduit along with accessories in surface all com job. 20 mm

Wiring for Circuit /submain along with earth wire with following size all com job. 2x1.5+1x1.5sq.mm

Suplying and fixing of following Modular type switch/socket in surface all com job. 5/6 amps, one way switch

15/16 amps, one way switch

15/16 amps, 6 pin socket outlet

3 pin 5/6 a,ps. Socket outlet

Supplying and fixing following size modules GI box along with modular base and cover plate 4/5 modules (78mmx78mmx45mm)

for exhaust fan

9" exhaust fan

ITC exhaust fan upto 450 mm sweep

Cairrage of materials Sand with lead 5 km

S/Chips with lead 13 km

Add GST 18 %

Add L.Cess 1 %

YOGENDRA YADAV