Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
12 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
S AND T
13 conditions · 1 needing a document upload
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.
Defination of Similar Work :- Trenching, cable laying, location & signal foundation /erection/ termination / wiring in connection with any signaling work. O R Any Indoor or combined Indoor/ Outdoor Signaling work including Supply, Installation, testing and commissioning of relay interlocking (RRI/PI) system for passenger carrying lines.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
23 conditions · 9 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1. The offer will be evaluated based on certificates enclosed with the original offer only. The railways wil not enter into any correspondence to get these certificates subsequently and the offer shall be evaluated based on the documents submitted along with the offer. 2. Tenderer may please note that meeting of eligibility criteria is strictly based on completion certificates issued by the executive in-charge of work and not linked with mere list of works claimed to have been executed by the tenderer or a copy of work order from railways. 3. Tenderer may please that meeting of eligibility clause shall be ascertained only from the completion certificates issued by the Executive in- charge of work and mere list of works claimed to have been executed by the tenderer or a copy of work order from railways shall be enough. It may also be noted that cognizance of those works, which are nearing completion or have been almost completed, shall not be taken only those completion certificates, wherein successful commissioning satisfactory performance of work have been clearly unambiguously acknowledged by Executive-incharge of any railway unit or any govt. Dept./undertaking for any similar work shall be considered for this purpose. 4. Any variation to quantities in any item and its associated wiring material account of supply and installation will have to be born by the tenderer. Railway engineer's decision in this regard shall be final. 5. All drawings related with the work can be obtained from the office of DRM Kota on any working day during office hours.
Tender document consisting of tender schedule, special condition etc. is attached. Tenderers are advised to read the complete tender document before bidding.
This tender will be govern by GCC(WORKS)APRIL 2022 of INDIAN RAILWYS.
NOTE:- ALL THE TENDER CONDITIONS WILL BE APPLICABALE AS PER LATEST GENERAL CONDITIONS OF CONTRACTS OF INDIAN RAILWAYS ISSUED, APRIL 2022 WILL BE FOLLOWED.
All the payment and other conditions are attached with tender document.
Although year of specification is given in the schedule, last amendment, if any, shall apply.
All tenderer must have valid GSTN number and rates must be inclusive of GST act shall be binding on contractor & railway
Compliance of GST act/rules & correction/modification issued by railway board with regard to|| GST act shall be be binding on contractor & railway.
Various signalling work in connection with (A) Extension of UP & DN loop line to achieve 753M CSR at Ghoti station. (B)Provision of track machine siding at Lasalgaon, Dhule & Kajgaon on Bhusawal Division
BSL-N-SNT-18-2026-27~CR
BSL-N-SNT-18-2026-27
Open
Works - General
9 Months
Jalgaon, Maharashtra
₹0
₹4.0 L
18 Sept 2026
18 Sept 2026
28 Sept 2026
571 items across 7 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 40,21,515.91 | ||
| — | 1.00 | — | — | ||
| Supply of Relay Rack Assembly complete with scaffolding, fixtures and accessories including MS Bars for fixing of relay plug board, string rods, fuse strips with bracket, 11 Way Bus Bars with cover and mounting brackets, runway for cable/wires, frame, base assembly etc. Siemens type & as per extant practice on C. Rly. Typical part list as per Annexure-II and Rack arrangement as per Sketch no SK-727 and Rack plan as approved by Engineer incharge. (Inspection by RITES) | — | — | — | 37,246.13 | |
| — | 5.00 | — | — | ||
| Supply of Tag Blocks 200 / 160/120 way with polycarbonate cover as per IRS S 77- 2006 (Rev 1 ) RDSO DRG. NO SA 24751, SA 24752 & SA 24753 Requirement of each type shall be specified by Engineer incharge . (Inspection by RDSO) | — | — | — | 7,464.2 | |
| — | 1.00 | — | — | ||
| Supply of Tag Blocks 96/ 100 way with poly carbonate cover as per IRS S 77-2006 (Rev 1 ) Requirement of each type shall be specified by Engineer incharge . (Inspection by RDSO) | — | — | — | 1,579.52 | |
| — | 1.00 | — | — | ||
| Supply of Main Cable Termination rack complete with scaffolding, fixtures & accessories including square bars for mounting 8-way terminal blocks, ladder, string rods, frame, base assembly, insulators, J bolt, nut/bolts & fasteners, backelite sheet, etc. Siemens type and as per extant practice on Central Railway. Typical part list as per Annexure-III and rack arrangement shall be as per sketch No. SK-727 with latest alterations. (Inspection by RITES) | — | — | — | 32,079.26 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderBooklet18-26-2718.9.2026_1.pdf
ATTACHMENT
Critical Item List
ATTACHMENT
Drawing
ATTACHMENT
GCC-April2022_merged20.05.2024.pdf
ATTACHMENT
CorrectionslipGCC13032026.pdf
ATTACHMENT
GCC_April-2022_2022__POLICY_27_04_22.pdf
ATTACHMENT
Annexure-ASafety-CriticalSignalingItemsbyRDSORSDte26.09.2025.1.pdf
ATTACHMENT
C.RLYDRAWINGANNEXURES-SORST-20211_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .