PROVN OF INTERNAL WKS / CUSTOMIZATION OF ECHS POLYCLINIC MEG CENTRE TO AN EXISTING PRE ENGINEERED BUILDING STRUCTURE AT BRV GPC COMPLEX LOCATION ASTRIDE CUBBON ROAD, BANGALORE

Amount

M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width in CM 1:6.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished even and fair all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and fair (without using extra cement) complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Preparing new plastered surface of walls and distempering with 1st quality acrylic distemper (ready mixed), dust free having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of primer over 2 layers of wall putty complete all as specified and as directed.

M&L preparing new surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

Forming square grooves in plaster n exc 12mm deep and n exc 15mm on face

S&F (in PEB structure) Expanded metal, exc 4kg per sq mtr cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specifed and as directed.

M&L for polypropylene chicken mesh of 12x14mm mesh of 1-2mm thick for metal joint in plastering including fixing firmly in wall to prepare for plastering all as specified and as directed.

M&L for 10mm thick barium plaster suitable for X- Ray rooms in one partr of coarse barium, one part fine barium and one part cement finished even and smooth complete all as specified and as directed.

Supplying and fixing drywall panelling system (for PEB) consists of GI framework (51mmx0.50mm thick) over PEB structural members, 12mm thick cement fibre board (confirmin to IS 14862, type B) and 12.5mm thick gypsum plaster board with and including filling cavity with minral wool 100mm thick (48Kg/cum density), sealing and finishing joints with joint tape and gypsum jointing compound, periphery of partition to be sealed with acoustic cum fire retardent sealant, finishing with premium wall putty complete all as specified and as directed. Note - Cost of mineral wool, gypsum board, cement fibre board, GI frame and all other hardware deemed to be included in the quoted rates

M&L for false ceiling with 10/12 mm thick gypsum board in ceiling fixed on frame work of GI section, the main runner of 22 gauge GI sheet and cross runner of 24 gauge GI Sheet must be framed to form a mesh 0.6 x0.6 mtr centre, the gypsum board must be fixed to GI frame and joint to be properly filled in with POP over GI mesh, paste and paper tap to get a levelled to smooth ceiling. Recessing of Gypsum board for fixing for light fixurs must be done with extra frame work of GI to hold the concealed light fixture etc including two or more coats of Plastic emulsion paint on ceiling with putty work designer complete all as specified and as directed.

M&L for ceiling system (in PEB Structure) made of 4 mm thick fibre cement designer building boards, GI section T grid of 32x15mm main tee, 26x15mm cross Tee, duly marked black line of 5mm wide in bottom fixed to PEB structural members with adjustable hangers fixed with RCC slab or PEB members complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock , steel roller system, area not exc 2 Sqm. (Note: The unit rate quoted by contractor excludes cost of glass and wiremesh and includes all other connected accessories. Net Opening will be measured for payment purpose.)

-ditto- but exc 2.00 Sqm each opening

S&F sheet glass 4.8mm thick ordinary quality, in squares exc 0.5 sq. m each pane complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 3 mm thick figured glass pin headed type and glazing with oil putty or fixed with metal frame in square and circular or curved n.exc 0.50 Sqm in each pane all as specified.

S&F framed work such as grills, gratings, support brackets etc., with ends of bars shouldered and/or riveted, or forged into spikers framed guard bars barred iron doors ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165.

S&F aluminium anodised frame for doors, sliding /openable windows, vetilators with one of more rebates incl joining cleat for fixing etc, with powder coating in straight or curvead frame complete all as specified and directed.

S&F powder coated, min thickness (50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, 3 Nos hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

Supplying and fixing of 6mm ACP sheet fixing (Cross bond, uro bond or equivalent) in shutter panesl including all necessary accessories and other necessary hardwares.

S&F 52mm thick PVC Partition consisting of 12mm thick both side prelam PVC plastic ply sheet and 5mm thick prelam heat moulded 'C channel reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete

S&F alumiium cast type Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg

S&F alumiium cast type Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg

S&F floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified

S&F 304 grade polished stainlees steel 150mm tower bolt with stainless steel screws all as specified and as directed.

S&F 304 grade polished stainlees steel 250mm sliding door bolt with stainless steel screws all as specified and as directed.

S&F 4 lever brass mortice lock 75mm

S&F double action floor spring hydraulically regulated made of 1.25mm thick aluminium alloy sheet

M&L acid resistance tiles 22mm thick vitereous ceramic, unglazed, set jointed and pointed in chemical resistance mortar, resin type in floors, walls etc complete

M&L for machine cut polished sadarahalli stone, uniform texture, in one piece in trade and risers, skiring of staircase inlcluding rounding the edge, cutting anti skid grooves 3 Nos in each trade, or in anti skid ramps, window cills etc including plastering/screed 15mm thick in CM 1:4 complete as specified and as directed.

M&L for 20mm thick approved granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like with and including cement screed (1:4), 15mm thick including half round moulding,pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

M & L hardcore of broken bricks of gauge n.exc 63mm deposited spread and leveled in layer n.exc 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate), as in sub base of floors.

S&F light shade vitrified ceramic tiles 10 mm thick anti-skid (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed in cement mortar 1:6 all as specified and as directed

S&F coloured anti skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6.

S&F coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in CP 1:4

M & L reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M & L reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone agg) as in beams, cantilevers, bressummers, lintels over 1.5 m span.

Formwork to Formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc complete all as specified

Formwork to sides & soffits of lintel beams, bands, cantilivers, shelves fair finished etc complete all as specified & directed.

S&F mild steel TMT bars 10 mm dia & over, cut to length bent to shape required, including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed.

S&F mild steel TMT bars 5 mm dia & over upto 10 mm as in stirrups, cut to length bent to shape required, including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed.

M&L for fabrication cabinets, cupboards etc of openable shutters, shelves partitins, drawers etc made up of 22mm solid core BWR ply choice lamination on the both faces, each shutter having a pair of self closing hinges or continous hinges as approved, stainless steel fancy handles, tower bolt and other fittings as directed, taking down old cabinets, S&F wood frame etc complete all as specified and as directed. Note - 1. Surface area of each member is measured flat for payment. 2. S&F of all necessary hardware deemed to be inclusive in quoted rates.

Supply and laying of 20 mm dia CPVC pipe SDR 11 & plain CPVC SDE 11 fitting on wall/ceiling or laying in floors complete all as splecified.

Supply and laying of 25mm dia CPVC pipe SDR 11 & plain CPVC SDE 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed.

S&F CPVC brass threaded elbow 20 mm fixed with all as specified.

S&F CPVC brass threaded Tee 20 mm all as specified.

S&F 15 mm bore fancy type bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S&F 15 mm bore diameter CP two way bib taps with crutch or butterfly handle,screwed down, screwed for pipe or for brass ferrule complete all as specified and directed.

S&F angle valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed both ends for iron/CPVC pipes or for unions complete all as specified and directed.

S&F CP Toilet paper holder fancy type 150mm Size with brackets complete all as specified.

M&L Health Faucet 15mm size, brass CP, with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified .

M&L for towel ring 200-250mm dia made of heavy duty stainless steel pipe or chromium plated all as specified and as directed.

S&F Glass corner shelf including CP railing, radius 250 mm complete all as specified and directed.

S & F bevelled edge looking mirror of 5.5 mm thick of approved size with chromium plated brass screws concealed with chromium plated polished caps as approved complete all as specified & directed.

S&F Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe all as specified and as directed.

S&F High pressure Laminate urinal partition 900x450x350mm, 10-12mm thick

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F vitreous china wash hand basin, white, counter top oval shape of 500-600 mm dia including one number brass CP waste coupling, waste pipe 32 mm dia,including cutting for and pinning in ends of brackets complete all as specified and directed.

S & F vitreous china washdown water closet pan & S trap (pedestal pattern) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinginng device with flush pipe to pedestal pan incl all joints incl connection to drain pipe and flush pipe.

S&F brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

M&L for 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

S&F stainless steel 32mm dia hollow pipe wall support 450mm long, heavy durty complete all as specified.

S&F PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F 1000 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of tanks all as specified.

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (Min wt 210 gms)

S&F CPVC tank adaptor 20mm dia.

S&F stainless steel medium weight curtain rods 25 mm dia including approved support bracket and a pair of polished end knobs for each rod fixed with stainless steel screws all as specified .

S&F stainless steel end knobs, polished, suitable for 25mm dia rods, medium weight all as specified

S&F stainless steel Wall bracket 100mm, polished, suitable for 25mm dia rods, medium weight, fixed in wall with brass screws all as specified

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 m depth; for foundation etc and getting out in soft/loose soil complete all as specified & directed.

M&L cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in foundations, filling & mass concrete complete all as specified & directed.

M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and fair as in plinth protection incl joints filling complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified & directed.

Removing excavated material n exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded crushed stone aggregates) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates back filling of pressed steel door frames all as specified.

Cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) in surface channels and drains complete all as specified and as directed.

M&L for laying of DWCPE (SN-04) Sewage pipe line 150mm dia bore of pipe incl sealing of joints, fittings etc complete with collars and including concrete bed type C2, 1:3:6 complete all as specified and as directed.

M&L concrete bed to 150 mm bore drain pipes incl packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm dia pipe complete all as specified.

S&F FRP manhole cover size 1.00 x1.00mtr, minimum 25 mm thick including FRP frame with hold fast, fixing with cement concrete 1:2:4 complete all as specified and as directed.

All as per item no.91 above but size 600x600mm

M&L for preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide.

M&L for Machine pressed pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 grade with grey cement and pigment as in ramps/Hardstandings complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation as sand cushioning complete all as specified and directed.

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheathed cable with multistandred copper conductor conforming to IS: 694:1990 (for Phase, Neutral and and Earth) in and including Non metalic PVC rigid condiut medium grade with ISI mark of appropriate size with all accessories laid in wall/ ceiling/floor etc, concealed with GI flush in box/terminal boxes of sutaible size, including front plate for mounting of modular switch/ socket and combined cover plate with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit and flush in box and making good the distributed surfaces matching with existing complete all as specified and as directed for following- One light/ Bell/ fan point controlled by one switch

All as per Item No 96 above here in before but for Modular type Socket 6/10 Amp of two module in independent board, 230 volts complete all as specified and directed by Engr-In-Charge.

All as per Item No 96 above here in before but for Modular type Socket 6/10 Amp of two module on same board, 230 volts complete all as specified and directed by Engr-In-Charge.

All as per Item no 96 above here in before but with 2.5 sqmm PVC insulated FRLSH unsheathed cable with GI Flush in box for modular switch/ socket 16 Amps of sutaible size as required with front plate for mounting of modular switch/ socket and combined cover plate of as required at site complete all as specified and as directed by Engr-in-Charge.

All as per Item no 96 above here in before but with 4 sqmm PVC insulated FRLSH unsheathed cable with GI Flush in box for modular switch/ socket 16 Amps of sutaible size as required with front plate for mounting of modular switch/ socket and combined cover plate of as required at site complete all as specified and as directed by Engr-in-Charge.

S&F for modular switch piano, flush type single pole, one way 16 Amps, 230 Volts complete all as specified and directed by Engr-In-Charge.

S&F for Modular type Socket 6/10 Amp of two way point complete all as specified and as deirected by engr in charge

S&F for Modular type Socket 6/16 Amp two way of 230 volts complete all as specified and directed by Engr-In-Charge.

S&F for modular switch piano, flush type single pole, one way 5/6 Amps, 230 Volts complete all as specified and directed by Engr-In-Charge.

S&F for modular switch piano, flush type single pole, one way 16A Amps, 230 Volts complete all as specified and directed by Engr-In-Charge.

S&F Fan Regulator step type 120W modular type Complete all as specified and as directed by Engr-In- Charge.

S&F Bell push piano type, 5 Amps complete all as specified and directed by Engr-In-Charge.

S&F call bell, musical type, 230 volts AC single pole complete all as specified and as directed by Engr-In-Charge.

S&F Single pole and neutral enclosure 10Amp, 230V with a two pin and earth plug and socket complete with one single pole MCB 230V complete all as specified and as directed by Engr-In-Charge.

M&L for ceiling rose surface bakelite 65x50 mm two to three terminals.complete all as specified and as directed by Engr-In-Charge.

S&F ceiling fan 1200mm sweep with BLDC electric motor having star rated service wire 6.0 cubic meter per minute /watt, single phase with operating voltage range 140 to 285 volts BEE 5 star rated including mounting arrangement , 3 core flexible copper conductor cable up to ceiling rose , down rod suitable size length etc complete all as specified and directed by Engr in Charge.

S&F PVC Body sound proof Exhaust fan 250 mm size with single phase 230 Volt 1200 RPM with louvers Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed by Engr-in - Charge

S&F VTPN DB - Dobule Door made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amp rated bus bar, 415 volt with PVC MCB blanking plate, stove enamelled for incorporated of MCBs, insulators and MCCB of capacity upto 125 Amps TP/FP etc, complete all as specified and as directed by engineer in charge

Supply and fixing MCCB FP 415 Volts 100 Amps, 16 KA complete all as specifed and directed by Engr-In-Charge.

Supply and fixing MCB TPN 63 Amps, 415 Volts complete all as specified and as directed by Engr-In-Charge.

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 8 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed complete all as specified and as directed by Engr-In-Charge.

Supply and fixing MCB SPN 40 Amps, 240 Volts complete all as specified and as directed by Engr-In-Charge.

Supply & fixing MCB SP 06-40 Amp, AC, 240 volts, complete all as specified and as directed by Engr-In-Charge.

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 04 Sqmm, 1100 volts grade (FRLS) and one run of 04 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through concealedin wall PVC conduit complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 06 Sqmm, 1100 volts grade (FRLS) and one run of 06 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through concealedin wall PVC conduit complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge.

Supply and fixing surface & wall mounted LED batten 2 feet 10 W with luminious efficacy not less than 100 lumen/watt including flexible copper 2/3 core wire from tube light fitting to ceiling rose with mounting provisions and all accessories with color of light warm white/cool day light as reqd at site complete all as specified and directed by Engr-in-Charge.

S&F building protection light fitting to be mounted on pole type bracket of minimum 60 Watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, corrosion resistant including optics for scattering light complete all as specified and directed by Engr-In-Charge.

M&L for Breaking road, pavement, hard standing, tiles of any type, including excavation of subbase, soil upto the depth of 0.60 mtr and width 0.45 mtr by mechanical means for fault finding in water pipe lines and including making good to the disturbed surfaces matching with existing after rectification of fault including removal of surplus material to nearby dumping point complete all as specified and directed by Engr-In-Charge. Note:(i) Any T&P required for work is deemed to be included in quoted rates. (ii) Tiles, cement concrete etc. required for making good is deemed to be included in quoted rates.

M&L for earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed by Engr-In-Charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm x 4 core complete all as specified and directed by Engr-In-Charge.

Supply and fixing LT Panel board outdoor type fabricated out of 3.15mm thick CRCA Sheet steel with width of panel not less than 0.70 mtrs, breath not less than 1.5 mtr, factory made vermin proof duly painted with two coat of synthetic enamelled paint over a coat of red oxide primer or powder coated, double door, water proof dust and vermin proof hinged and lockable doors inlcuding rain protection cover on top and complete with interconnections, with copper wires, tapes, opening from both sides with cable entry from bottom, with cable alley and bus bar chamber, bonding to earth and painting, including angle iron frame of size minimum 40x40x6mm having 4 legs 0.60 mtr long including grouting in PCC 1:4:8, to the reqd depth, including under mentioned Items/accessories all as specified and directed by Engineer-in-Charge. INCOMING (a) MCCB 125 amps 4 pole 25 KA fixed thermal and fixed magnetic setting - 01 No Busbar : - Aluminium busbar 3 phase 4 wire of 400 Amps supported with ebonite insulators -1set OUTGOING (b) MCCB 63 Amps 4 pole 25 KA with adjustable thermal and fixed magnetic setting – 02 Nos (c) Multifuction meter suitable to display voltage, current, frequency, power factor and other relavent parameters for three phase 4 wire 415 Volts System including three nos CTs of appropriate ratio – 01 No (d) LED indicator RYB – 03 Nos

M&L for sand cushioning in trenches for bricks of u/g cable with coarse sand laid dry in trenches with uniform thickness complete all as specified and as directed by Engr-In-Charge.

Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection all as specified and directed Complete all as specified and as directed by Engr - In - Charge.

Supply & laying 25mm GI tubes medium grade with all fittings laid in trenches complete all as specified and as directed.

Supply & laying 20mm GI tubes medium grade with all fittings laid in trenches complete all as specified and as directed.

S&F float valves of size 20mm as required at site complete with brass fittings with rod and plastic ball complete all as specified and as directed.

S&F 20 mm gun metal gate valve with inner wheel head,screwed both ends in iron pipe complete all as specified and as directed.

S&F 80 mm bore non return valve double flanged cast iron type with 16mm dia iron nuts,bolts & washers and rubber insertion sheet conforming to IS specification complete all as specified and as directed.

S&F round shape 15 watt 220volts AC recessed type light fitting with high efficiency PMMA diffuser,soft glare free light complete with drivers,holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

PRAGATHI BUILDERS (BID ID -3305164)

K. VENKATESH NAIDU (BID ID -3305300)