79 H(F)(W)/2023-24

Amount

The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 20 Km.)

ST Pole 11 Mtr. long (540 sp-52)

11 KV XLPE Al. Cable of Size 3x185 sqmm

11 KV Cable Jointing Kit outdoor 3x185 sqmm

ACSR Dog Conductor

LT Cable Alluminum 3.5x400 sqmm

LT Cable Alluminum 3.5x150 sqmm

LT Allu. Armoured Cable 2x10 sqmm

Pannel LT (A- Type)

Pannel LT (B- Type)

Pannel LT (C- Type)

Energy Meter Single Phase

Energy Meter Three Phase

Energy Meter Three Phase AMR Base

L.T. Staight Through 3.5x400 sqmm

L.T. Staight Through 3.5x150 sqmm

Other Line material i.e. cross arm / conductor / pin insulator / stay / earthing/cable Box etc. except A.B Cable.

Dragging of ST Pole as per RESPO Norms.

Fabrication and Erection of Double Pole Support on ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of 33 and 11 KV Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles by Ms Earthing rod of 20x2500 mm and 6 swg earthing wire etc.as per RESPO Norms

Construction of Plinth of Transformer Size 2x2x2.5 Mtr including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Chemical Pipe for Earthing (all the material will be supplied by the contractor.)

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Laying of 33/HT/LT 11 KV XLPE Cable 3x185 sqmm in D/C Trunch/Duct

Installation of Heat Shrinkable Type cable jointing kits outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Laying of LT XLPE Cable Alluminum 3.5x150 sqmm as per RESSPO Norms.

Laying of LT Allu. Armoured Cable 2x10 sqmm as per RESSPO Norms.

Installation of Distribution Pannel (A- Type)

Installation of Distribution Pannel (B- Type)

Installation of Distribution Pannel (C- Type)

Installation of Energy Meter Single Phase

Installation of Energy Meter Three Phase

Installation of Energy Meter Three Phase AMR Base

Installation of L.T. Staight Through 3.5x400 sqmm

Installation of L.T. Staight Through 3.5x150 sqmm

Supply and Laying of LT 3.5 Core, 25 sqmm Armoured Al. Conductor XLPE insulated 1.1 KV grade armoured (Power Consumer)

Supply and Laying of G.I. Pipe 40/50 mm Incl. all necessaory for LT Consumer and Type C Baxes with laying

Supply and Laying of G.I. Pipe 6'' dia with Clamp and Nut Bolt

Supply of LT Bus Bar Box 440 Volt Heavy Duty

Supply and Laying of PE 80 PN 6 HDPE Pipe 110 mm

Supply and Laying of PE 80 PN 6 HDPE Pipe 160 mm

Supply and Laying of PE 80 PN 6 HDPE Pipe 50 mm

Supply of Gland (A+B+C)x4

Supply of Pre Cost of Pannel Base A,B

Supply of Pre Cost of Pannel Base C

M/s S.K. Construction

M/s Shukla Enterprises