REPAIR/MAINTENANCE OF JOINERY WORK IN AGE B/R-II AT BABINA CANTT

Amount

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed.

Taking down shutters of any description n.exc 1 Sqm each etc complete all as specified and as directed

Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each etc complete all as specified and as directed

M&L for PCC (1:2:4) Type B1 (using 20mm graded aggregate) in wall, boundary pillars and post or similar work for hold fsat in door and windows etc all as directed and specified. .

Supply and fix for 30 mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified.

S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, etc complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement AND FIX in the frame at site complete all as specified and as directed

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.

S&F 35mm thick factory made plain framed, panelled Shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 12 mm BWP grade BWR Plywood. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engr-in-Charge.

S&F 30mm thick 2nd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass, gauge etc divided into square with plain, chamfered or rounded, mitred beads for securing glass/gauge complete all as specified in SSR Part-I para 8.24 (b) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.

M&L for 2nd class hard wood for plain, solid, straight chowkats and frames wrough, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed in position complete all as specified and as directed by the Engr-in-Charge.

S&F for Rubber door seal 50mm wide and 5 mm thick with Aluminium strip of size 19mm wide and 2mm wide fixed with machine steel screw with washer, fixed in repair complete all as specified and as directed by the Engr-in-Charge.

S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge.

S&F in repairs stainless steel wire cloth 0.63 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge.

S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21complete all as specified and as directed by Engr-in-Charge.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S/F 150 mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked complete all as specified and as directed by Engr-in-Charge.

S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S&F 300 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

S&F in repair steel windows z section with side hung shutters including box type hinges with steel handle and steel peg stay with glazing bar dovetailed or welded for receiving glass after and including taking out old unserviseable steel window complete all as specified and as directed by the Engr-in-Charge.

S&F in repair steel windows z section with side hung shutters including box type hinges with steel handle and steel peg stay, without glazing bar dovetailed or welded for receiving glass after and including taking out old unserviseable steel window complete all as specified and as directed by the Engr-in-Charge.

S&F framed work such as grills, grating, etc, with ends of bars shouldered and or riveted, or froged in to spikes framed guard bars, barred iron doors, ladders, or similar work confirming to Fe 290 Gde-E-165 complete all as specified and as directed by the Engr-in-Charge.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane complete all as specified and as directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by the Engr-in-Charge.

S&F in repair 3mm thick figured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.

S&F 5.5mm thick Sheet glass of size exc. 0.5 Sq. m each pane, ordinary quality duly covered with tinted solar control film 25 micron, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws,each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.

M&L applying one coat of synthetic enamel paint including preparation of old wood or wood based surfaces of any description over 10 cm width or girth complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engr-in-Charge.

S&F in powder coated aluminium window (double shutter double leaf ) side hung type with stainless steel but hinge, one shutter glazed with and including 4mm thick plain sheet glass and other shutter with stainless steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapples rubber gasket stopper aluminium grills of aperture size of grill 70 mm, aluminium anodised handle 100mm long, aluminium anodised tower bolts 100mm long and peg stay etc complete and size of aluminium frame 100mm x 40mm x 1.55mm and shutter frame size 40mm x30mm x 1.55mm after taking down old steel/wooden windows complete with all fittings etc and making good the disturbed surfaces by plastering and destempering/painting etc complete all as specified and as directed by the Engr-in-Charge.

S&F mild steel flat iron of size 25x3 mm as in hold fasts and clamps & similar small articles confirming to Fe-410-W or Fe-290 complete all as specified and as directed by the Engr-in-Charge.

M&L for 2nd class hard wood plain fillet of size exc 13 & n.exc 25 Sq cm, rectangular or square in section, clean sawn, secured with nails or beads complete all as specified and as directed by the Engr-in-Charge.

S&F stay/ handle cleat as per requirement at site and fixing with necessary nut, bolts or welded to complete for fixing of handle /stay in steel windows including taking down old one complete all as specified and as directed by the Engr-in-Charge.

S&F Aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed in repair complete all as specified and as directed.

M&L Anodised aluminium frame straight for doors/windows/partitions using aluminium section of minimum size 100x44mmx1.60mm thick fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed.

S&F anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 5mm thick plain colour PVC sheet (Rajshree make) and 5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed.

S&F powder coated aluminium sliding windows(three track frame of weight not less than 1.17 Kg/Rm) with one fly proof shutters and two glazed shutter having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including usingg standard aluminium section including necessery fittings and fixtures complete all as specified and directed. Note: (i) All rate i.e track frame, shutter, glazing cleat, rubber gasketetc is deemed included in quoted rates. (ii) Wiremess & glass pane will be measured & paid seperately with respective items.

S & F Powder coating aluminium window and ventilator shutters with frame of weight not less than 1.17 Kg/Rm with sash bar half portion openable for ventilator purpose including fixing of wiremesh outside with fastening arrangement, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised snap beading screws etc. complete all as specified and as directed.

S&F 4mm thick 3 ply Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws to timber frame work or aluminium saction complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F 18mm thick Rajshri Celuka ply of grade 1 quality of one side pre-laminated & other side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet /shutters incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge

S&F 18mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge

S&F 12mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make wall mounted kitchen cabinet sides back & pull out shelves inside the cabinets complete all as per specifications and as directed by the Engr-in-Charge

S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters, complete all as specified and as directed by the Engr-in-Charge.

S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and as directed by the Engr-in-Charge.

S&F in repair 18/19mm thick prelaminated particle board interior grade, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including 2nd class hard wood beading on cutting exposed edges, polishing complete as in palmate boxes and kitchen cabinet and bed room shutters or in any type complete all as directed.

S&F in repair continuous piano hinge mild steel 30 mm width flap when open mild steel , bright finish or electrogalvanised complete all as specified and as directed by the Engr-in-Charge.

S & F 100mm aluminum Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws Complete all as specified and as directed.

Dismantling Wall panelling and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

S&F 5mm thick hollow wall panelling plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site including disconnecting and refixing of electric light board complete all as specified and as directed.

S&F for 25mm dia stainless steel Drapry rod with bright polish of superior quality fixed in repair complete all as specified and directed.

S&F 25mm dia stainless steel fancy type single bracket fixed with PVC gutty and screws, fixed in repairs complete all as specified .

S&F stainless steel round knob at both ends of curtain rod of 25mm dia fixed in repairs complete all as specified and as directed.

Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and as directed by the Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match floor etc complete all as specified and as directed.

Material and labour for colour printed glazed ceramic tiles (Premium quality) (300X200mm) X 6mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1 : 4) complete all as specified and as directed by the Engr-in-Charge.

Demolition of brick work or stone Masonary built in cement mortar as in drain, manhole, septic tank and soak well complete all as specified and directed.

M&L brick work with fly ash 'bricks (FASB) confirming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radius built cement mortar 1:4 complete all as specified and as directed

M&L renderig/screeding 15mm thick cment mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as specified and as directed

M&L Newly plastered surface and applying two coat of oil bound distemper and one coat of white putty on walls all as specified and directed.

Cutting holes in brick walls in cement mortar for walls inserting hold fasts and making good dismantled portion in cement mortar 1:3 exc half brick but n exc one brick complete all as specified and as directed.

M/s Ravi Traders

Ms Vinay constructions

M/S Chadha Brothers