REPAIRS TO TEMP ROOF, AC SHEETS, MANGALORE TILES, LEACKAGES, SEAPAGES, FALSE CEILING AND ROOF TREATMENT AT RHIME AREA UNDER AGE B/R (SOUTH) NO-I OF GE (SOUTH) SECUNDERABAD

Amount

Dismantling of single layer mangalore pattern or similar tiles roofing including ridges complete all as specified and as directed.

M&L for Roof tiles, Mangalore pattern, interlocking at side joints laid dry complete all as specified and as directed.

M&L for except Roof tiles, Mangalore pattern, interlocking at side joints laid dry complete all as specified and as directed.

Dismantling the battens for tiles of any size including tiling fillets spaced exc 15cm complete all as specified and as directed.

S&F rolled Mild steel sections as in main and cross beams hip and jack rafters, purlines fixed independently of Fe-410W (Gde-250) quality A complete all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof covering incl ridges complete all as specified and as directed.

M&L for 6mm thick AC corrugated sheets in roofs fixed with 'L' or 'J' type in cranked hooks bolts complete all as specified and as directed.

M&L for asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets complete all as specified and as directed.

Dismantling timber scantling of section 40 sq cm and over in any position complete all as specified and as directed.

S&F 2nd class hard wood as in scantling clean sawn timber fixed complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level ) .

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floors complete all as specified and as directed.

M&L for Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over 20 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size 200x300x6mm thick wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile over 10 mm thick plaster in CM 1:4 as in skirting / dados etc,complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dados etc. over 10mm thick rendering in CM (1:4) on walls such as backing of tiles complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar, or cement lime mortar including all quoins, arches pillars etc.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6. complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified and as directed.

Taking down cement plaster from brick or stone walls, ceiling etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound will be measured and paid for separately)

M&L for making good of the fallen/broken portion of the RCC Roof/Ceiling with proper reinforcement binding & application of antifungal paint for avoiding rusting of old steel reinforcement complete all as specified and as directed.

M&L prepartion of new surfaces on walls and applying two coats of oil bound distemper over a coat of primer with wall care putty in two coats complete all as specified and as directed.

M&L prepartion of new surfaces on walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls and applying three coats of white washing complete all as specified and as directed.

M&L perpartion of new plaster surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L preparation of surfaces over a coat of priming paint and applying two coats of cement base paint on new plastered surfaces of wall complete all as specified and as directed.

M&L prepartion of new surfaces and applying two coats of colour washing over a coat of white wash on wall surfaces complete all as specified and as directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

M&L for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and as directed.

S&F aluminium handles fabricated type, anodised, 150 mm size complete, all as specified and as directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets.

M&L for providing false ceiling with anodised aluminium snap grid frame work with size of grid 605 x 605 mm with aluminium main tee size 25 x25 x1.60mm thick and, cross T section of size 25 x 25 x 1.60mm thick and wall angle of size 25x25x2mm thick fixed to roof with rawl plugs/GI wire suspenders complete all as specified and as directed.

M&L perforated particle board/tiles 12 mm thick for insulation and accoustic purposes, 60 x 60cm in size fixed with nails to timber frame work or with staples on snap grid.and one coat of primer and two coat of synthetic enamel paint complete all as specified and as directed.

M & L 4 mm thick non Asbestos Cement Plain building boards, fixed to timber/ Aluminium frame work with screws in ceilings and preparing surface, applying two coats of OBD over a coat of primer. complete all as sepcified and as directed by Engr-In-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in sunken floor, roof incl tarfelt etc complete all as specified and as directed.

Taking down existing water proofing treatment with tarfelt including cement plaster from roof including parapets etc., and removing the debris to a distance not exceeding 250m complete all as directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregates) as in floor / sunken floor filling complete all as specified and as directed.

Rendering 15mm thick in CM 1:3 using water proofing compound as per manufacture instruction finished even and smooth with out using extra cement as in sunken floor complete all as specified and as directed by Engr-in-charge.(Note: WPC will be measured and paid separately)

M&L for providing water proofing felt having glass fibre non woven reinforcement and weighing 3 to 4 kgs /Sqm in 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown bitumen 85/25 at the rate of 1.2 kgs per sqm as in sunken floor ( bottom and vertical surfaces ) complete all as specified and as directed

M&L for 40mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in padding (level course) on roof finishing cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. Note : Water proofing compound will be measured and paid separately.

M &L for priming plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm as per IS 3384 and providing water proofing treatment by applying 3.5 Kg/Sqm Actatic polypropylene (Advanced APP torch on membrane mineral finish) having polyester film reinforcement stabilized with fibre glass and finished on top with grey mineral slabs torch on system of thickness 3 mm by torch bonding complete all as specified and as directed by Engr-in-Charge.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Supply only integtral water proofing compound complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs Vitreous china wash hand basin white flat back size 550x400mm including brackets, CP pillar cock (fancy type )of 15mm bore, CP waste fittings 32mm, incl waste pipe complete all as specified and as directed.

S&F in repairs Vitreous china orrisa pan squatting pattern 580 X 440mm with integral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity white , with inlet ball valve , float and handle including brackets , Flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F in repairs 15 mm dia Pillar taps fancy type , brass chromium plated screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm dia fancy type bib taps,brass chromium plated with capstan head, screwed down, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm dia Stop valves, brass chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repair 15 mm dia stop valves brass chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm dia angular stop valve brass chromium plated screwed for 15 mm bore iron pipe complete all as specified and as directed.

S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S&F in repairs 32 mm dia waste coupling of PTMT(Half or Full thread) complete all as specified and as directed.

S&F in repairs PVC connection pipe 15 mm size PTMT nut 450 mm long complete all as specified and as directed.

S&F in repairs 32mm dia PVC waste pipe of 1.20 mtr long for wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed.

S&F in repairs 40mm dia PVC waste pipe of 1.20 mtr long for sink of pressure rating 10 kgf/Sqm complete all as specified and as directed.

S&F in repair 75 mm size PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs stainless steel sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S&F in repairs for stainless steel plate rack of size 1200x900mm complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 15 mm dia steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,(concealed) complete all as specified and as directed.

S & F in repairs 20 mm dia steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, complete all as specified and as directed.

Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 110mm complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 75mm complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed.

Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc from tanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 250 & n exc 500 ltrs and recconneting ,air lock including dismantling and re fixing of tank complete all as specified and as directed.

Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc fromtanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 750 & n exc 1000 ltrs and recconneting ,air lock including dismantling and re fixing of tank complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 500 ltrs(cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks complete all as specified and as directed.

M&L Plain/ Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) , copings, base of water tank,bed plates and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.

S&F PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed to iron pipes.

S&F in repairs 20 mm dia Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions and complete all as specified and as directed.

M&L for uprooting of wild trees such as grass/bushes etc from the roof / wall surfaces / AC sheets/soil pipes surroundings including its penetrated roots with suitable cleaning chemical and making good to damaged plaster by providing CM 1:3 and finish the surfaces to match with existing surface complete all as specified and as directed.

NARAYANA CONSTRUCTIONS

EXELLENT POWER CORPORATION

M/S V PRATAP REDDY

S.R.M.K Enterprises

sri ram construction

BEEGEE DESIGN SYSTEMS

VACON INFRASTRUCTURES

ramesh construction co