Construction of steel roofing work of Community Center of Garhwal Sabha at Ram Nagar Shimla

Amount

Providing and fixing 0.60 mm thick prepained steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 mircons over 5 mircons primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 1.60 mm thick with zinc coating not less than 275 gm/m²

Providing &Fixing BP sheets 1.66mm to 2mm thick in ever board/facial/soffits ceiling i/c cutting fixing and welding to steel work.

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. Sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/m²

Providing and fixing PVC pipes 100 mm dia for rain water pipe (RWP)

Providing and fixing 0.47 mm th. prepainted sheet for facia etc.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class D wood

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class D wood 40 mm thick shutters

Providing & fixing wire gauze shutters using galvanised M.S Wire gauge of average width aperature 1.4 mm in both direction with wire of 0.63 mm dia for door window and clerestory windows with hinges and necessary screw D Wood

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10 mm

Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 150 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm

15 mm Cement plaster on rough side of single or half brick wall finised with a floating coat of neat cement of mix 1:4

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including routing the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including routing the joints with white cement and matching pigments etc.

Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete :100 mm

Providing and Fixing plain square edged cover fillets 40mmx12mm section with wood screws in ceiling and lining including 1st class D/wood.

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete.

Providing and fixing 15 mm CP Brass Nahni trap

P/F of self cleaning desgin with screws down or hinge grating

Providing and fixing CP brass soap dish with CP brass bracket fixed to wooden cleats with brass screws chrome plate

Providing and fixing PTMT towel rail complete bracket fixed to wooden plug with CP Brass Chrome plate

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Providing and fixing CP Brass bib cock of approved make conforming to IS (15mm nominal size)

Providing and fixing CP brass Pillar Cock of approved quality 15 mm nominal bore

Providing and fixing CP Brass Mixer for wash basin approved quality 15 mm nominal bore

Providing and fixing CP Brass Angle cock 15 mm dia

Providing and Laying G.I Pipe 15 mm dia with fitting & Clamps etc

Providing and fixing G.I/M.I union 15 mm dia

Providing and fixing water closet squatting pan (European type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge

P/F PVC Connection pipe of 15 mm with Brass Union for wash basin & Sink

Providing and Laying PVC pipes 75 mm dia (Heavy duty)

P/F PVC Door Bend 100 mm dia

P/F PVC Pipe 100 mm dia (For approved quality)

P/F PVC floor trap 100 mm dia

P/F P.V.C. Plain Bend 75 mm (Heavy duty)

P/F PVC low level flushing cistern with manually controlled device 8 to 10 ltr Cap.

P/F PVC Door Tee 0.75 mm dia (Heavy duty)

P/F S.S grating 100 mm dia (Heavy duty)

Providing and fixing PVC water storage tank syntax or equivalent three layer cost of connecting / tank nipples , making connection etc. 1000 litres capacity including all assecories.

P/F Floating valve of approved quality high or low pressure with plates floots complete for water tank 15 mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore

RAMESHWAR THAKUR

SHUBHAM THAKUR

mukul thakur

RAJINDER SINGH VERMA

BILAL AHMED BUTT

Vinod Kumar Shah

SUNIL KUMAR MEHTA

DALIP SINGH

Devinder Thakur

Hari Krishan Sharma