PROVISION OF SHELTER FOR UPS AT CEMILAC RENOVATION OF TOILETS AND CERTAIN REPAIR WORKS TO COMPRESSOR ROOM AT SIMA BUILDING NO P 164 AT GTRE UNDER GE I R AND D EAST BANGALORE

Amount

Dismantling tile work in floors and roofs for thickness of tiles 10 mm to 25 mm laid in cement mortar including stacking material within 50 metres lead for offering under schedule of credit complete all as specified and as directed.

Demolishing cement concrete / nominal concrete 1:3:6 or richer mix (i.e. equivalent design mix) manually/ by mechanical means in any description as in sunken /roof including disposal of material within 50 metres lead as per direction of Engineer - in - Charge.

Providing and laying Non skid Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on and including 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete all as specified and as directed.

Providing and fixing Ist quality ceramic glazed wall tiles of size 450x300 conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, as in skirting, risers of steps and dados, over and including 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and as directed.

Providing and laying cement concrete in sunken floor, sub base / base etc., up to floor five level, excluding the cost of centering, shuttering and finishing, (1:2:4) (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and as directed.

Providing and laying in position cement concrete of specified grade for sunken floor, sub base or similar locations upto plinth level excluding the cost of centering and shuttering - all work up to plinth level (1:4:8), (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) complete all as specified and as directed.

Material and labour for providing and laying water proofing treatment to sunken portion of WCs , Bathroom and kitchen etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating of make as approved in TI 5/2003. The following procedures to be adopted during the execution of work :- (i) Cleaning the sunken /lowered portion of RCC slab surface for full depth of sunken floor by wire brush , chisel out any mortar sticking the surface, all pipes passing through walls of sunken floor shall be laid before water proofing treatment is carried out .One 40 mm dia PVC pipes , 35 cm long medium grade GI pipe with wire gauge on inside mouth shall be provided to each sunken portion. (ii) Applying FOSROC Nitoproof 600PF (Minimum 0.8 mm dft ) over a priming coat of Nitoproof WB primer or Equivalent product of Asian paints , M/s MC Bauchemic / CIPY/ SIKA/ Pidilite Dr Fixit / Thermax/STP applied as per manufacturer's instructions to bottom and full vertical sides of sunken floors . (iii) Fill it with water and check for dampness and seepage. In case the slightest(contd..)

indication of seepage / leakage is noticed , the same shall be rectified by injection grouting to seal all cracks or application of Polymer modified mortar FOSROC Nitobond SBR or equivalent of M/s MC Bauchemie/ CIPY/ SIKA/ Pidilite Dr Fixit / Asian paints / Thermax / STP admixed with Integral WPC or Cementitious crystalline waterproofing compound in the affected area to seal all cracks and micro cracks if any : and this shall be done by contractor at his own cost. (iv) Apply additional coat of FOSROC Nito proof 600 PF or equivalent or Asian paints / M/s MC Bauchemie/ CIPY/ SIKA/ Pidilite Dr Fixit / Asian paints / Thermax / STP. (v) All junction points of side walls where CI/ GI pipes are passing through shall be sealed with epoxy cement mortar. NOTE :- (i) The sunken slab sloped towards outer face so as the drain the water to GI spout pipe (ii) Coving shall be provided at the junction of slab with the wall (iii) Nahni trap shall be 10 mm below finished floor level. Ensure the drain pipe dia is larger than the Nahni trap size (iv) The outer end of the spout should be chamfered.

Providing and fixing in repairs white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and as directed.

Supply and fix in repairs health faucet(ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed.

Providing and fixing in repairs brass CP two way bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore complete all as specified and as directed.

Supply and fix in repairs of 15mm nominal bore CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete all as specified and as directed.

Providing and fixing on shoe suitable for 110 mm bore wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed.

Providing and fixing in repairs of un plasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore complete all as specified and as directed.

Providing and fixing in repairs of Vitreous china urinal partitions with necessary fittings as per direction of Engineer-in-charge

Supply and fix vitreous china counter top/Countersunk wash basin in circular / oval shape, white of size 560x400mm placed on granite platform complete all as specified and as directed.

Supply and fix, in repairs of 15 mm dia fancy Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drainage board 510x1040 mm bowl depth 250 mm as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and as directed.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors where ever required complete all as specified and as directed.

Providing and fixing in repair of P.V.C. waste pipe for sink or wash basin in repairs including P.V.C. waste fittings complete flexible pipe - 32 mm dia complete all as specified and as directed.

Providing and fixing in repair of CP Waste Coupling for wash basin and sink, of approved quality and colour waste coupling 32 mm dia of 125 mm length complete all as specified and as directed.

Dismantling 15 to 40 mm dia G.I./PVC pipe exposed on wall including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer- in-Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes .size of 25 mm internal dia for external work, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i.e. fixing the pipe with clamps at 1.00 m spacing, this includes jointing of pipe. Supply and fixitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 15 mm dia bore concealed work, including cutting chases and making good the walls etc. having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i.e, fixing the pipe with clamps at 1.00 m spacing, this includes jointing of pipe, supply and fixitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge

All as per item No.23 here-in-before but of size of 20 mm internal dia concealed work.

Providing and fixing in repairs of 25mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and as directed.

Providing and fixing in repairs of 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and as directed.

Providing and fixing in repairs mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, rectangular shape 1500x450 mm complete all as specified and as directed.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and as directed.

Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size with area of slab over 0.50 sqm, approved shade, colour and texture laid over and including 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels all as specified and as directed.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete all as specified and as directed.

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below complete all as specified and as directed.

Providing and fixing factory made single extruded WPC frame size 45 x 70 mm(Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

NOTE :- For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fix , Providing and fixing factory made single extruded WPC 30 mm thick (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

Supply and fix in repair of PVC (SWR) floor trap, 75 mm plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking down eaves gutters, PVC pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including removal to offer under schedule of credit (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 75 mm single socketed including bends, elbows and all fittings in any length with rubber ring joints, fixed to walls and laid in trenches complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 110 mm single socketed including bends, elbows and all fittings in any length with rubber ring joints, fixed to walls and laid in trenches complete all as specified and as directed.

Supply and fix PVC (SWR) pipes / Rain water Pipes 160 mm single socketed including bends, elbows and all fittings in any length with rubber ring joints, fixed to walls and laid in trenches complete all as specified and as directed.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metre lead as directed by Engineer-in-charge.

Providing and fixing powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, for fixed portion all complete as per architectural drawings and the directions of Engineer-in-charge. NOTE :- Glazing, paneling and dash fasteners shall be paid for separately.

Providing and fixing powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required all complete as per architectural drawings and the directions of Engineer-in-charge. NOTE :- Glazing, paneling, fittings and dash fasteners shall be paid for separately.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc., with float glass panes of 4 mm thickness weight not less than 10.00 kg/sqm complete as per the architectural drawings and the directions of Engineer-in-charge . NOTE :- Cost of aluminium snap beading shall be paid in basic item.

Providing and fixing 3 mm thick frosted glass on one side , ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides complete all as specified and as directed.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Material and labour for roof treatment consisting of the following :- (a) Mechanical cleaning of surface in roof to make it free from any bituminous surface residue / dirt , oil and grease etc all as specified and as directed by GE/ Engr-In - charge (b) Cracks treatment by cutting open cracks and cleaning it from dirt /loose materials etc and filling with Polyurethane based sealant with and including application of PU based primer all as directed by GE / Engr-in-charge (c) Applying water based polyurethane modified dispersion (single component , cold applied , non toxic , VOC component ) in three coats including one coat of primer of same materials after dilution of water at 50 % or specific primer matching same materials as per manufacture specification and as directed by Engineer-In-charge.

(d) A layer of Geo textile grid of minimum 40 GSM sandwiched in between two PU layers as per manufacturere's specification shall be provided . MAKE :- Bostik / Berger/ Fosroc/ Sika/ Asian or any other make approved by E-in-C's Branch for PU based water proofing treatment NOTE :- Roof treatment work shall be get executed by authorised Applicator of the manufacturer only with prior approval of GE. .

Material and labour for rolled mild steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. wherever required, all complete including gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete all as specified and as directed.

Material and labour for providing the sealant (pouring grade) in the existing 10mm wide & 40mm deep groove / joint after preparation of joints along with application of primer consisting of the following as per manufactures instructions :- (a) Thioflex 600 shall be of M/s FOSROC / MASTER FLEX TM 700i of BASF or equivalent in CIPY. (b) Primer 7E shall be M/s FOSROC or equivalent in BASF/CIPY. NOTE :- Application of Epoxy and sealant shall be carried out by authorised applicator of manufacture.

Material and Labour for heavy duty epoxy resin based flooring with moisture barrier of total 2 mm thick consisting of preparation and removing existing epoxy floor topping by light grinding/shot blasting/wire brushing etc to provide mechanical key to receive floor topping. The prepared surface shall be provided using two component epoxy resin based system Nitoprime 25 of FOSROC or equivalent at 6 sqm/litre in one coat and allowed to dry for 24 hrs, over this primer solvent free 3 part high strength trowel applied screed having minimum compressive strength of 90/Nmm2, Tensile strength of 20 N/mm2 and flexural strength of 40N/mm2 to thickness of 2mm applied by spreading with trowel and finished by proper compaction and allowed to dry to cure for 24 hrs (Nitoflor TS5000 of FOSROC or equivalent), after curing two component epoxy resin based system (Nitoflor FC140 or equivalent) putty mixed with quartz filler shall be used for sealing the porous surface of epoxy screed system, Nitoflor TF5000 of FOSROC or equivalent.

After this a shop coat of two competent epoxy resisn based system, (Nitoflor FC150 of FOSROC or equivalent) shall be applied in two coats at 1 mm thick with coverage of 10 sqm per 4.5 Ltr pack as top coat complete all as specified and as directed. NOTE :- Applicator of epoxy flooring shall be done with manufacturer authorised applicator with prior approval of GE.

Material and labour for Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window cills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and as directed.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement for cover slabs - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and as directed.

Material and labour for centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers , cover slabs etc complete all as specified and as directed

Material and labour for steel reinforcement of Thermo-Mechanically Treated bars of grade Fe-500D or more upto plinth level or above for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level complete all as specified and as directed.

Dismantling steel door /windows / Taking down gate manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and as directed.

Material and labour for cement plaster 1:4 (1 cement: 4 fine sand) finished with a coat of neat cement - 10 mm cement plaster complete all as specified and as directed

Material and labour for 15 mm thick cement plaster in two coats under layer 10 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 5 mm thick cement plaster 1:6 (1 cement : 6 fine sand) complete all as specified and as directed

Material and labour for 5 mm thick cement plaster on ceiling, cement mortar 1:3 (1 cement: 3 fine sand) finished with a coat of neat cement -complete all as specified and as directed.

Extra for providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and as directed.

Material and labour for Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :(two or more coats) over and including water thinnable priming coat with cement primer complete all as specified and as directed.

Material and labour for wall painting with two coats of premium acrylic emulsion paint of exterior grade with anti fungal primer, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats, removal of existing wall finish and scaffolding wherever required to achieve even shade and colour complete all as specified and as directed.

Material and labour for painting with synthetic enamel paint for steel / wood of approved brand and manufacture of required colour to give an even shade : One or more coats on old work complete all as specified and as directed.

Material and labour for white washing with lime to give an even shade :New work (three or more coats) complete all as specified and as directed.

Material and labour for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) including finishing complete as in sub base flooring complete all as specified and as directed. NOTE :- The plinth protection shall be laid in panels and length of the each panel shall not be more than 2.00 metre all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item.

Material and labour for Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), in floors including finishing complete all as specified and as directed.

Disconnecting damaged overhead / terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

Cleaning of terrace / loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. NOTE :- (i) The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (ii) If during cleaning any GI fittings or ball cock is damaged the same is to be repaired by contractor at his own cost and nothing extra will be paid on this account.

Removing excavated/demolished material exc 5.0KM but not exc 15 KM and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and as directed.

Earth work in surface excavation in all kinds of soil not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge

Material and labour for Reinforced cement concrete work for all works upto plinth level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and as directed.

Material and labour for centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete complete all as specified and as directed.

Material and labour fro structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and as directed.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 Mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and as directed.

Material and labour for painting with synthetic enamel paint of approved brand, shade and manufacture to give an even shade two or more coats on new work complete all as specified and as directed.

Supply and fix 30mm thick rigid PUF TR panel made out of profiled sheet on top and plain sheet at bottom with CFC free pentane blown polyurethane foam as the core (the core is CFC/HCFC free pentane blown polyurethane foam density of 40+2 kg /cum in 50mm thick sheet ) the panel sheet having 1000mm cover width, 34.5mm crest height @333mm c/c made out of 0.5mm TCT 300 Mpa stress, colour coated galvalume steel sheet 150 GSM aluminium zinc coated with 20 micron polyester paint, the sheet shall be fixed with self drilling self tapping fasteners, all as specified and as directed.

Material and labour for plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size or stone aggregate 40-50mm size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and as directed.

Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) all work up to plinth level excluding the cost of centering and shuttering complete all as specified and as directed.

Material and labour for chequerred precast cement concrete tiles 22 mm thick in foot path & court yard, using medium shade pigment using 50% white cement 50% Grey cement jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) complete all as specified and as directed.

Material and labour for PVC vinyl flooring sheets 2mm thick laminated plain coloured, marbled mosaic or mottled finish laid with approved rubber based adhesive in floors complete all as specified and as directed.

Taking down carefully un serviceable aluminium/ copper point wiring (light, fan, socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc , removing all material for re use/ issued under sch of credit and making good the disturbed surface as the existing one, complete all as directed.

Taking down exiting copper/aluminium sub main wiring complete for offering under schedule of credit (credit for above items shall be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc as directed by Engr- in-charge.

Material and labour for wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthling the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required for one light point / wall fan / exhaust fan point controlled by one, one way switch 5 Amps and regulator.

Material and labour for wiring of circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable drawn in and including surface/ recessed medium class PVC rigid conduit as required for the following :-

(a) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire.

(b) 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire.

(c) 4 x 10 sq. mm + 2 x 6 sq. mm earth wire.

(d) 4 x 16 sq. mm + 2 x 6 sq. mm earth wire.

Supply and fix suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 Amps modular socket outlet and 5/6 A modular switch, connections etc as required complete all as specified and as directed.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 and 15/16 Amps modular socket outlet and 15/16 A modular switch, connections etc as required.

Supply and fix ceiling rose surface backelite two to three terminal complete all as directed.

Supply and fix LED batten with aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver1 x 20 watts fixing on wall/ ceiling with rod complete all as specified as directed.

Supply and fix 10 Watt LED light fitting, mirror type with high out put diffuser 2 feet, 10 watt 220 Volts, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix LED building security light 35 Watt, 230 Volts, AC, outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and including 1.5 Mtr length GI tubing medium grade 25mm dia bent to shape with necessary CI clamps, bolts etc for fixing and connecting from ceiling rose to fitting with 3 core 1.5 sq.mm insulated copper cable complete all as specified and as directed. NOTE :- (i) All necessary fixing/connecting arrangements of nuts, bolt, MS rod shall be provided by the contractor without any extra payment from department. (ii) Quoted rate shall be deemed to included the charges of necessary boom fit.

Supply and fix LED highbay light fittings 150W, IP66 very high efficiency round highbay in PDC housing suitable for industrial application. The luminare has efficacy upto 150Lm/W to reduce quantity/wattage thereby reducing operational cost all as per Cat part No SAUCERGEN XADVPROHBP 150W LED 857 PNBBORL of make Havells or techno commercially equivalent models specified in PS complete all as directed. NOTE :- (i) All necessary fixing/connecting arrangements of nuts, bolt, MS rod to be provided by the contractor without any extra payment from department. (ii) Quoted rate shall be deemed to include the charges of necessary boom fit.

Supply and fix wall mounted fan 600mm sweep elegantly designed fan base/120 ribs guard full card control for speed and oscillation ON/OFF and aero dynamically and balanced blades and power in put 50 watts 230 volts supply, 1440 RPM necessary connection with 3 core flexible wire from wall mounted fan to ceiling rose complete all as specified and as directed.

Supply and fix exhaust fan, steel body, AC single Phase. 230V of size, 300mm sweep 900RPM with blades, frame and louvers including cutting the wall of stone/ brick masonry as per the size of exhaust fan including grouting the bolts, nuts etc for fixing necessary connection with three core flexible wire from and making good the disturbed surface as the existing one, exhaust fan to ceiling rose complete all as directed .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 600mm sweep 900RPM with, blades, and frame and louvers including cutting the wall of stone/ brick masomery as per the size of exhaust fan including grouting the bolts,nuts etc for fixing necessary connection with three core flexible wire from and making good the disturbed surface as the existing one, exhaust fan to ceiling rose complete all as directed .

Supply and fix SPN MCBs distribution board of sheet metal enclosure, factory made, double door powder coated single pole and neutral with 200 Amps rated bus bar 8 way 240 Volts complete all as specified and as directed.

Supplying and fixing SPN 32A rating 240/415 V, 10KA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete testing and commissioning etc as required complete all as specified and as directed.

Supply and fix SP 5A to 32A rating 240/415 V, 10KA 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete testing and commissioning etc as required complete all as specified and as directed.

Supply and fix of surface/ recess mounting, vertical type, 415 V, VTPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required complete all as specified and as directed. NOTE :- Vertical type MCCB TP DB is normally used where 3 phase outlets are required for 8 way (4 + 24), Double door.

Supply and fix Moulded Case Circuit Breakers for Distribution Network with thermal magnetic 4 pole 200 Amps capacity 36 KA rupturing capacity in VTPN DB, necessary connectioning with GI/Copper strips/suitable size of copper conductor wire from bus bar, provision of suitable size of copper lugs as per the out going cable complete all as directed.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. complete all as specified and as directed.

Providing and fixing 25 mm x 6 mm G.I. strip on surface or in recess for connections etc. as required.

Supply and fix entire drum assembly, consisting of round pipe, brackets, flange assembly, roller chains etc, automated with suitable motor and starter for lifting of capacity 1500 kg Jielong Rolling Shutter complete kit all as specified and directed by Engr-in-charge.

Supply and laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq.mm, 3.5 Core including taking up existing old unserviceable LT UG cable complete all as specified and as directed.

Supply and fix double compression copper stain less steel gland for fixing armoured cable in panel of size 3.5 core 70 sq.mm complete all as specified and as directed.

Supply and laying synthetic insulating mat of size 2.00Mtr x 1.00Mtr x 2.5 mm thick suitable for upto 33 KV grade complete all as specified and as directed.

Excavation in trenches n.exc. 1.5m wide and n.exc 1.5m in depth for laying cables / poles foundation / stay assembly and getting out in hard / dense soil all as specified and as directed.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and as directed.

Returning, filling in, including spreading levelling watering and well ramming in layers n.exc. 25cm thick all as specified and as directed by Engr-in -charge.

Material and labour for sand cushioning to under ground cable providing with a layer 8cm thick before laying the cable and 15 cm thick after laying the cable complete all as specified and as directed. NOTE :- Punned thickness only will be measured for the purpose of payment.

Material and labour for un- reinforced pre cast concrete covers class LV type 250mm x 150mm x 40mm size factory made for cable protection complete all as specified and as directed.

Supply, install, testing and commissioning of indoor type, LT electric panel consisting separate compartment for each out going feeders with locking arrangement for each feeder fabricated out of 2 mm thick MS sheet floor mounting type suitable size base frame / channel, painted with powder coated and pre coated primer including necessary PCC (1:3:6), type C2, foundation of panel board and earth work including comprising the following :- (a) Bus bar chamber of 3 phase and neutral, 4 strip 415 volts with 600 Amps copper strip - 1 set. (b) MCCB 400 A, 35 KA, 4 pole,415V, manual draw out type with micro processor release -01 No (In coming) (c) MCCB 200A, 35 KA, 4 pole,415V, manual draw out type with micro processor release -01 No. (d) MCCB 100A, 35 KA, 4 pole,415 V, manual draw out type with microprocessor release -04 No. (e) MCCB 63A, 35 KA, 4 pole,415V, manual draw out type with microprocessor release -05 No.

(f) Change over switch 4 pole 200 Amps-01 No. (g) Three phase Volt meter - 01 No (h) Three phase Ammeter - 01 No (i) LED Indicator lamp Red, Yellow, Blue - 01 Set (j) Complete internal wiring with suitable copper conductor wires - 1 Lot (k) Provision of extra space for three more out going feeders suitable for 200 Amps MCCB NOTE :- (i) All termination of existing cable should be provided with copper lugs/thimbles and suitable size of glands & rate for the same is deemed to be included in the item.

SREE BUILDERS (BID ID -3368052)

VP DEVELOPERS AND CONTRACTOR (BID ID -3370117)