CWE/P-01/2020-21

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Taking down cement plaster or cement line plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each including taking out hold fast complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Sqm and not exceeding 4Sqm each including taking out hold fast complete all as specified and directed.

Taking down shutters of any description exceeding 1sqm and not exceeding 2sqm each, complete all as specified and directed.

Taking down shutters of any description exceeding 1sqm and not exceeding 2sqm each and refixing in the same opening, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposal of unserviceable material, debris and rubbish outside the MoD land, complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

Description all as per item No. 8.00 here-in-before, but except bricks.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified.

M&L rotational moulded polythene water storage tank, coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug, incl taking down unserviceable old tank any type complete all as specified and directed.

M&L Disconecting existing tanks exc 250 ltrs but n exc 500 ltr in capacity, sitting aside (or lowering if required) for repairs, cleaning. etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 105 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after tarring of hollow portion of frame complete all as specified and directed

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after tarring of hollow portion of frame complete all as specified and directed

S&F factory made PVC door and window frame of size 50 mm x 47mm with a wall thickness of 5 mm made cut of extruded 5 mm PVC foam sheet meatered at corners and jointed with 2 Nos of 150 mm long brackets of 15 x 15 mm MS square tube. The verticle door profile to be reinforced with 19 mm x 19 mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The frame to be fixed to the wall using MS screws of 65/100 mm hold fast size complete all as per manufacturers specification and all as directed by Engr-in-Charge.

S&F28 to 30 mm thick Factory Made Solid moulded PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with 5 mm thick heat moulded PVC sheet ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick PVC sheets for top rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 10 mm thick printed (multi colours) PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing.

S&F steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including 10mm sqaure bar/grills, glazing (glass) , guaging (wire mesh) and two coat synthetic enamel paint over a coat of red oxide primer all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 including taking down existing spoiled and unserviceable windows of any type ( wooden/stee) complete all as spd and directed. all as specified and directed by Engr-in-Charge.

S&F flush shutter 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L Plain framed factory made 35mm thick shutter of 2nd class hard wood rail & style (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12 mm veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated all as specified.

M&L factory made Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24(a) kiln seasoned and pressure treated all as specified.

S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed with machine nut and bolts on new wooden shutters.

S&F stainless steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section of size 100mm and fixed, complete all as specified and directed.

15mm thick rendering in CM 1:6 on fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

M&L 15mm thick rendering in CM 1:4 on brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified

M&L glazed ceramic coloured tiles 350 x 450x 7 mm in skirting/dado set and jointed in neat cement slurry and pointed in white cement to match the surface over 10 mm thick rendering in CM 1:4 . including dismantling of old tiles (Shade of tile shall be approved by GE)

S & F non skid ceramic coloured tiles ,7 to 8 mm thick (Square / rectangular) polished , area of each tiles exc. 0.11 sqm but not exc 0.18, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match incl 15 mm screed bed in CM 1:6 including dismantling of old tiles

M & L for cement concrete tile 30 cm x 30cm x 25 mm thick machine prerssed set and jointed and pointed in neat cement slurry in floors with grey cement and pigment as reqd (coloured made in PVC mould with vibration process) prelaminated for glossy finish over 15 mm thick screed bed in CM 1:4 all as directed by Engr -in charge.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30mm complete all as specified and directed

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished , brass , polished or as approved by Engr-in-Charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically described (reinforement cut as required to facilitate demolition), complete all as directed by Engineer-in-Charge.

M&L Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed by Engineer-in-Charge.

M&L TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

M&L Plain cement Concrete 1:3:6 type-B1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified.

M&L 75mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) as in sub-floors/path, finishing the surface even & fair complete all as specified.

M&L 75 mm thick cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in plinth protection and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.

M & L Second class hard wood small fittings such as brakets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary labour, articles not exceeding 200 cu.cm each complete all as specified

S & F stainless steel wire cloth 0.36 nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.

Easing to steel windowes of any size by repair/replacing the rusted items of windowes ( of any shape & size) like handles, stays, friction/box type hinges to make in proper functioning by providing all necessary fittings, fixtures,oiling and welding etc where as required all as specified and directed.

Cleaning of all foreign material such as fungus, mass, dust,incl taking down shrubs/roots etc by brushing and dusting, sprinkle water on surface, surface shall be levelled with a layer of 20 mm thick CM (1:4) mixed with water proofing admixture as per manufacturer's instructions and applying Polymer APP modified membrane with non-woven polyster reinforcement/mat with thermal insulation with white mineral gravel finished on upper side of weight not less than 3.8 kg/sqm and thickness not less than 3mm laid by torch application with overlap 100 mm on length side and 100 mm on the width side over a coat of hot blown bitumen 85/25 @ 1.2 Kg/sqm over bituminous oil based primer (IS-3384) @ 0.4 litre/sqm on prepared surface all as specified and directed including demolition of existing roof treatment of any decription such as wornout tarfelt etc.all as specified and directed.

M&L for cutting out cracks to V-Section in existing roof or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 by weight all as specified and directed.

M & L PCC type B-0 1:2:4 (12.5 mm graded aggregate) with WPC in padding/provided to make up uneven surface of roof/ weathering/ rounded/ gola etc all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone/ concrete, glazed with putty or fixed with beads, complete, all as specified and directed.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.50 sqm in each pane all as specified or as directed.

Preparation of new plaster surface of including cornices by brooming down with steel wire brushing etc, and applying two coats of oil bound distemper over a coat of primer including 1-2 mm thick wall care putty complete all as specified

M&L for preparation of old plastered surfaces and applying one coats of white wash on ceiling all as specified.

M & L for prepration of newly plastered surfaces/roof facia and applying two coats of cemenrt base paint over a coat of primer including preparation or as spfd or as directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

M&L Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

Fixing only old steel water tubing of 20mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as required, complete all as specified.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

M&L Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

Fixing only old steel water tubing of 20mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as required, complete all as specified.

Supply and fixing in repairs angular stop cock (ISI marked) of cast copper alloy chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified.

Supply and fixing in repairs stop valve of cast copper alloy chromium plated with long shank concealed type with wall flange screwed down high pressure screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick masonry, complete all as specified.

M&L PVC connection 15mm size with PTMT nuts on both ends of length 450mm , complete all as specified.

M&L Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed

S&F Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia, PTMT grating 125mm dia with waste hole including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

S&F in repair for vitreous china squatting pan 'Orissa' pattern of size 580mm x 440mm white with integral foot rest with 'P' or 'S' trap 100mm, front or back inlet and connection to trap with cement mortar etc incl lime concrete bedding in 1:3 with brick bats complete all as specified or as directed.

Supply and fxing in repairs, PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints , complete all as specified.

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Dismantling of timber scantling 40sqcm and over in section framed work,as in any position, complete all as specified.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including one shop coat of Zinc chromate primer paint including preparation of surface,complete all as specified.

M & L preparation of old treated surfaces of walls and applying two coats of cement base paint complete all as specified and directed

M&L applying one coat of synthetic enamel paint including preparation of old or previously treated steel surfaces over 10cm width or girth, complete all as specified and directed.

M&L one coat of synthetic enamel paint including preparation on old painted wooden or wood base surface of any description, not otherwise described over 10cm width or girth, complete, all as specified and directed

M&L granite stone slab 18 to 20 mm thick(Z BLACK) machine cut bedded jointed and pointed with grey cement slurry including rounding of exposed adges and making hole 25 mm dia for gas pipe (if required) , cutting & polishing over and incl 15 mm thick cement screed in 1:6 CM, all as spd and directed

Supply and fixing in repair 15mm bore pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete, all as specified & directed

Demolition or breaking up drain pipe (salt glazed ware, AC, PVC or reinforcement concrete) set in cement mortar/concrete complete all as specified.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed, complete all as specified and directed.

M&L PVC (SWR) bends any radius 110mm bore, complete all as specified.

S&F in repair 20 mm dia wooden finishes fancy type pre painted mild chromium plated curtain rod fixed in position brackets, stop, roller complete all as specified and directed including taking down old curtain rod and making good to match the existing surface, complete all as specified.

S&F 300mm ordinary rat tail mild steel rod pattern springs including roller and roller plate complete all as specified.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match to shade of the slab including rubbing and polishing including 20 mm screed bed in CM 1:6, complete all as specified or as directed including taking down of old stone slabs.

M & L for machine cut kota stone slab on wall for skirting/dado, 14-16 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match to shade of the slab including rubbing and polishing, including 10 mm thick rendering in CM 1:4 complete all as specified or as directed.

Vitrified ceramic tiles light shade 10 mm thick area of each tile but not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per ser item No.80.00 here in before but as in wall/skirting with 10mm thick rendering in cement mortar 1:4 in lieu of 15mm screed bed in cement mortar 1:6 complete all as specified.

S&F stainless steel sink 1mm thick for kitchen or laboratory wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm fixed, complete all as specified.

S&F Stainless steel plate rack made out 1.00mm thick sheet, over all size 750X600X200mm complete all as specified and directed.

M&L rendering 5 mm thick on ceiling surfaces in cement mortar 1:4 on fair faces of brick and making the line in true shape & finishing the surface even and smooth without using extra cement, complete all as specified.

M&L three coats of white wash including preparation of newly plastered surfaces of ceiling complete all as specified.

S & F Ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as spd and directed.

M & L Aluminium alloy handles (ISI marked), cast type, anodised of size 75mm and fixed, complete all as specified and directed.

Supply and fxing Hasp and staple,125 mm long aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified. ISI Marked

M&L RCC nominal mix 1:2:4, type, B-2 (using 20mm graded crushed stone aggregate), as in slab supported on walls, columns in floors, roofs, landings, balconies and in shelves, complete all as specified.

Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces of concrete, complete all as specified and directed.

Supply and fixing vitreous china white soap dish size 160x160x90mm fixed to plugs with chromium plated brass screws complete all as specified

S&F Sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket guard and railing 60cm rail complete all as specified.

M&L Concrete bed to drain pipes including packing under and haunching against the sides of pipes for 150mm drain pipe after they are laid in PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

M&L Cutting into existing manholes 150mm dia for connecting existing drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4section) in cement concrete 1:2:4 type B-l smooth finished, and reforming, benching as required complete all as specified and directed.

M&L Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl necessary brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

M & L 10 mm thick cement plaster in CM (1:3) using 3% by weight of cement in sunken portion all as specified and directed by Engr–in-Charge

M&L applying a tack coat of industrial bitumen @ 85/25 grade (ISI marked) @ 1.20 Kg/Sqm incuding cleaning surfaces all as specified and directed by Engr–in-Charge

M&L for lime concrete in 1:3 with brick bats filling and mass concrete as in sub base for sunkan floor all as specified and directed by Engr–in-Charge

M&L APP based polymeric membrane miniumum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wtnot less than 150 gms/sqm) land on primed surface by forced application complete joint sealed with torch all as specified

M&L cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizental face of groove with cement mortar 1:3 complete all as spd .

M&L rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas,ceiling and roof projection etc incl taking out pealed off plaster/concrete and making good to cracked RCC surface in true line /shape by providing RCC 1:2:4 type b1 using 20 mm graded crushed stone aggregate including all necessary form work to thickness at required at GF and FF finish even and smooth without using extra cement complete all as specified and as directed by Eng-in charge. NOTE- the rate will be inclusive of scafolding for single or double storey including making hole in brick work and making good in cement mortar.

Complete removal of existing treatment of wall/ceiling and applying 3mm thick of wall care putty for smoothness of surfaces incl rubbing and sanding complete and applying one coat of primer and two coats of oil bound distemper all as sped and directed.

Preparation of old plastered/ un-plastered wall surfaces or wood based surfaces including brooming down or steel wire brushing, scraping down, smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots, and applying one coat of white wash on walls including cornices, pilasters etc, complete all as specified.

M & L for preparation of surfaces of walls, facia of any description and applying two coat of apex paint exterior/interior white or any tint colour complete all as spd and directed.

M&L 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floors complete all as specified and directed.

S&F unplasticisted PVC drainage pipe 160mm dia type 'B' with wall thickness 4mm (min) of pressure rating 4KN/Sqm laid in tranches and joined with cement solvent including testing complete all as specified and directed

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

Dismantling/ taking down of cast iron or unrienforced concrete or PVC soil waste and drain pipe 75mm or 100 mm dia with all fittings complete all as specified and directed

Supply and fxing 100 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with cement joints fixed to wall, complete all as directed

All as per ser item No. 110.00 here in before but except pipe complete all as specified.

Supply and fxing 75 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with cement joints fixed to wall, complete all as directed

Supply and fxing 100 mm dia sand cast pipe, cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor or in trenches complete all as directed

Supply and fxing cast iron floor trap ISI marked of 75mm dia of outlet, with grating including jointing to waste pipe with fixed in cement concrete 1:2:4, type B-1 complete all as specified.

S&F Cast iron bends ISI marked 100 mm bore (any radius), diminishing pieces or tapers with oval access door complete all as specified.

S&F Cast iron bends ISI marked any radius 100 mm dia with duct foot heel rest complete all as specified.

Supply and fxing Cast iron bends ISI marked (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 75mm ISI marked, complete all as specified.

Supply and fxing Cast iron branch pieces ISI marked, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, bore of pipe 100mm, complete all as specified.

Supply and fxing Cast iron branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, ISI marked, bore of pipe 100mm, complete all as specified.

S& F CI swan neck (or off sets) 100 mm dia upto 152 mm projection, ISI marked, complete all as specified.

Extra over cast iron pipes and fitting if providing with lead joint in lieu of cement joint for 100 mm bore complete all as specified

Extra over cast iron pipes and fitting if providing with lead joint in lieu of cement joint for 75 mm bore complete all as specified

S&F stack clamp out of 50 mm by 5 mm lat iron and 16 mm dia round iron stays, including boltsand nuts and securing ends of stays to wall or roof for 100mm bore pipe complete all as specified.

S&F stack clamp out of 50 mm by 5 mm lat iron and 16 mm dia round iron stays, including boltsand nuts and securing ends of stays to wall or roof for 75mm bore pipe complete all as specified.

S & F 50 mm dia cast iron cowl (ISI marked) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified

M&L Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.

S&F 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

M & L for Pre painted galvatume aluminium zinc coating GI based Plain steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws in ridge as specified including demolition of old sheets of any description,

S & F block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces 18mm thick, with lipping on front face if reqd, fixed in cupboard shutter, cupboard shelves/partion, shutters etc as specified and as directed colour of board as approved by GE.

M&L Plain fillets, rectangular or triangular in section clean sawn, secured with nails or brads sectional area exc 6Sqcm & nexc 13Sqcm, second class soft wood (Kail) complete all as specified .

S & F clean sawn 2nd class hard wood in scantlings timber framed and fixed specified and as directed

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L Point wiring for light/fan/bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkun boxes having thickness as specified 3mm bakalite laminated sheet for switches and sockets, including 1.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per above item no 134.00 here in before but for one 3 pin socket outlet 5 amp on independent board all as specified and directed.

All as per above item no 134.00 here in before but for one 3 pin socket outlet 5 amp on same board all as specified and directed.

All as per above item no 134.00 here in before but for bell point all as specified and directed.

M&L Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet for one 3 pin socket outlet 15 Amp on independent board including 2.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

M&L Switch piano flush type 5 Amp single pole one way, (ISI marked), complete all as specified.

M&L Switch piano flush type 15 Amp single pole one way, (ISI marked), complete all as speciied.

M&L Socket outlet 5 pin, 5 Amp flush type, complete all as specifed.

M&L Socket outlet 2 in 1, 3 pin, 5 & 15 Amp flush type, complete all as specifed.

M&L Lamp holder Polycarbonate type with back plate having matching colour to holder for angle/batten fittings complete all as specified and directed.

M&L Electric bell 230 volts AC supply single pole all as specified and directed by Engineer-in-Charge.

M&L Switch bell push flush type 5 Amp single pole one way (ISI marked) complete all as specified

M&L Ceiling rose, 65x50mm three terminals isolated body complete all as specified.

M&L Stepped type electronic fan regulator, socket type, 5 stage speed variation ISI marked, heavy duty complete all as specified.

Supply and Fixing LED Bulkhead fitting 10 watt all as specified and directed by Engr-in-charge.

S & F in replacement of CFLs with LED smart Lamp, B22 type ,14 watt,complete all as specified and directed.

S & F in replacement energy saving decorative LED box type with Led Rod 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings. (Note power factor should not be less than 0.95) complete all as spd and directed.

S & F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.

M & L MCB SP 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed by Engr-in-charge.

M & L MCB SPN 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed by Engr-in-charge.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3 of SSR Part I, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI medium grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified. Note: The rate quoted include cost of 7.5 metre earthing wire with protection pipe.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

Supply and laying in repairs of existing circuit/submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawing into and including concealed PVC rigid non metallic conduit of adequate size and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size wiil be measured as a one unit.

S & F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB four pole 100 Amp AC 415 volts 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing (Note :- (i)The DB shall be VTPN (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (vi)MCCB's and MCB's should have a same make as of DB.

Supply and laying for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, of size 25 Sqmm 4 core and taking down of old unservicable /brunt electric cable complete all as specified and directed. Note:- Earth work including excavation, returning filling , removing, sand cushioning, GI pipe,brick covering for mechanical protection of cable etc will be measured and paid for separately under respective items of schedule.

Excavation in trenches n. exc. 1.5 metre wide and n. exc. 1.5 metre in depth for laying of UG cable and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removal of excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above starting point complete all as specified and directed

M & L Dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

M & L Sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

Supply and fixing in replacement of GI tubing medium grade of 40 mm nominal bore of pipe in trenches/under roads/ under culverts/under paths/under floor/on walls /with pole in new position with screwed sockets joints, together with all tube fittings complete all as specified and directed .

S & F bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. Notes :- (i) Contractor shall produce LM79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall give guarantee/ warranty of complete fitting/ fixture for minimum 2 years from the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of the material at no extra cost. (iv) Contractor shall arrange complete material at site for approval of GE before incorporation in the work. (v) Driver shall be IP 66 degree of protection potted seal type with inbuilt SPD and external SPD of capacity 10 KV to be provided in addition to inbuilt.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

M/S PREMI CONSTRUCTION CO

Abrol construction co

VIKRAM SINGH MANHAS

kay gee construction co

RD BUILDERS

M/S Raghuvanshi Builders

Raghbir chand