Annual maintenance and repair to Water supply, Sanitary Installation and Sewage Disposal for Nuabazar and V Point and CISF complex (Sandhakud) area 2024-25.

Amount

Making lead caulked joints to C,I. S/S pipe and specials as per specification including making lead jointing caulking, gasketing and testing the joints and supply of lead. Gasket, fire wood, cost and conveyance of all materials required for the work and all labour, T&P, taxes, etc. all complete and testing the pipe as per direction of Engineer-in-charge.(Excluding GST)

100 mm dia. Lead Joint

150 mm dia. Lead Joint

200mm dia. Lead joint

250mm dia. Lead joint

300mm dia. Lead joint

450mm dia. Lead joint

Cleaning of chocked ferrule points ( excluding fittings )& replacing of G.I fittings if necessary as per site condition including earth work excavation and refilling with labour, T&P checking the pipe line to ensure no leakage on resuming to required pressure with mending good to damages etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Cleaning of O.H tank of multistoried building, cleaning the deposited silt inside the tanks by aid of pans & vessels & brushing the interior surface by soft brushes using bleaching / surf wash for germ free as per direction with supply of all labour & pumping out water by diesel pump with hire & running charges of pump including cost of fuel & operator scaffolding upto any height if required etc complete as per direction of Engineer-in-charge.(Excluding GST)

Removal/cutting, uprooting of wild growth, unwanted trees etc. from wall surface, chhajjas, Parapets of residential buildings with scaffolding at any height including supply of all labour, materials, T&P etc. all complete as directed by Engineer in-charge. (Considering 6 Qtrs. as a block). (Excluding GST)

Supplying of following PH materials of good quality with ISI mark with all transportation loading & unloading at both ends with all taxes, tollage, royalty etc. Complete & deposited in the section store as per direction Engineer-in-charge.(Excluding GST)

Porcelain hand wash basin (16" x 22")

Porcelain standard pedestal for H.W basin

15mm dia C.P Pillarcock

32 mm CP waste

32 mm steel sink waste

40 mm CP waste

50mm CP waste

32mm PVC Waste pipe

40mm pvc waste pipe

50mm pvc waste pipe

15mm Brass stop cock (wt. 450gm)

20mm dia brass stopcock(wt. 450gm)

15mm Connection pipe (PVC/CP)

Porcelain kitchen sink (24' x 18" X10" )

Steel Kitchen Sink (24x18x10)cm

5mm thick bevelleged plate glass mirror 24" x 18" size with masonite board and mirror screw.

50mm G.M.F.W.V

40mm. G.M.F.W.V

25MM G.M.F.W.V

20mm G.M.F.W.V

15mm G.M.F.W.V

10 ltr capacity PVC low level cistern

Soap Holder

100mm dia shower

20mm dia 60cm long towel rail

C.P Glass self (600x125) with glass

CP self

150mm/100 mm dia C.I/CP. Grattings

15mm dia symet ballcock(Rod with ball)

15mm dia C.P stopcock

20mm dia C.P stopcock

20mm dia C.P concealed stopcock

15mm dia C.P angle stopcock

15mm long body C.P. Bib cock

15mm CP.Bibcock

15 mm dia Symet bibcock

15mm dia PVC pillar cock

Cistern washer

PVC washer

Long Flush bend for Cistern

C.P Towel ring

White cement

Gasket

M-seal

Health faucet

C.P two way bib cock

Hot & Cold 15mm connection pipe

25 mm GI tank nipple

Basin rack bolt

CP extension piece

Hacksaw blade

Porcelain 23" IWC ( Orissa Pan)

Porcelain 20" IWC ( Orissa Pan)

Commode (p-trap) EWC with cover

Commode (s-trap) EWC with cover

commode sheet cover and clamp

2000 ltrs capacity (PVC-3 core white colour )

1000 ltrs Capacity (PVC-3 core white colour )

Supply of G.I Pipes (Medium Quality)/PVC pipes (Sch-80) of different dia. with ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST).

15mm Dia. G.I pipe

20mm Dia. G.I pipe

25mm Dia. G.I pipe

40mm Dia. G.I pipe

50mm Dia. G.I pipe

15mm UPVC Pipe

20mm UPVC Pipe

25mm UPVC Pipe

40mm UPVC Pipe

50mm UPVC Pipe

Supply of U-PVC fittings of different dia. of Sch-80 as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST)

15mm Dia. U-PVC union

20mm Dia. U-PVC union

25mm Dia. U-PVC union

40mm Dia. U-PVC union

50mm Dia. U-PVC union

15mm Dia. U-PVC elbow

20mm Dia. U-PVC elbow

25mm Dia. U-PVC elbow

40mm Dia. U-PVC elbow

50mm Dia. U-PVC elbow

15mm Dia. U-PVC tee

20mm Dia. U-PVC tee

25mm Dia. U-PVC tee

40mm Dia. U-PVC tee

50mm Dia. U-PVC tee

15mm Dia. U-PVCsocket

20mm Dia. U-PVC socket

25mm Dia. U-PVC socket

40mm Dia. U-PVC socket

50mm Dia. U-PVC socket

15mm Dia. U-PVC MTA ( Brass Threaded)

20mm Dia. U-PVC MTA( Brass Threaded)

25mm Dia. U-PVC MTA( Brass Threaded)

40mm Dia. U-PVC MTA( Brass Threaded)

50mm Dia. U-PVC MTA( Brass Threaded)

15mm Dia. U-PVC FTA( Brass Threaded)

20mm Dia. U-PVC FTA( Brass Threaded)

25mm Dia. U-PVC FTA( Brass Threaded)

40mm Dia. U-PVC FTA( Brass Threaded)

50mm Dia. U-PVC FTA( Brass Threaded)

15mm PVC Ball Valve

20mm PVC Ball Valve

25mm PVC Ball Valve

40mm PVC Ball Valve

50mm PVC Ball Valve

U-PVC Paste

Thread tape

Supply of G.I fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST).

15mm Dia. G.I socket

20mm Dia. G.I socket

25mm Dia. G.I socket

40mm Dia. G.I socket

50mm Dia. G.I socket

20mm G.I. RS.

25 mm G.I. R.S

40 mm G.I. RS

50 mm G.I. RS

50 mm Dia. G.I union

40 mm Dia. G.I union

25mm Dia. G.I union

20mm Dia. G.I union

15mm Dia. G.I union

15mm Dia. G.I elbow

20mm Dia. G.I elbow

25mm Dia. G.I elbow

40mm Dia G.I elbow

50mm Dia G.I elbow

20mm Gl Reducer elbow

25mm G.I. Reducer elbow

40mm G.I Reducer elbow

15mm Dia. G.I tee

20mm Dia. G.I tee

25mm Dia. G.I tee

40mm Dia. G.I tee

50mm Dia. G.I tee

50mm G.I. reducer Tee

20mm G.I reducer Tee

20mm Dia. G.I S.P.

15mm Dia. G.I S.P.

25mm Dia. G.I S.P.

40mm Dia. G.I S.P.

50mm Dia. G.I S.P.

15mm Dia. G.I Plug

20mm Dia. G.I Plug

35 x 3mm M.S. Screw

Cleaning of sewerage line, septic tanks (Big & small) man hole, I.C., soak-way pit & disposing sewerage sludge & burring in a pre-digged pit near by & closing with local earth with supply of all labour, T&P, pump including hire & running charges of pumps all taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Man holes

Inspection Chamber

Gresase Chamber

Small size Septic tank

Labour charges for dismantalling of IWC/ EWC/AWC/OWC holes in brick/ conc. work supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Labour charges for fitting & fixing of IWC/ EWC/AWC/OWC holes in brick/ conc. work,making flooringwith CC(1:2:4) and neat cement finish with supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Labour charges for laying of PVC pipes and other PH materials laid on wall or under graund including dismantling , cutting holes in brick/ conc. Work supply of fitting & materials with socketand screw joints including cuttingthreads to pipe, pipes to length including eachworkexcavation of all types of soil,required scaffolding & refilling the trench afterthework andfixing of pipeline in wall with clamps of providing light barriers withsupply ofall labour ,T&P taxes etcall complete as per direction of Engineer in charge(Excluding GST)

Layingof 15mm to 25mm dia pipe

Laing of 40mm to 50mm dia pipe

Supplying the following HCI/PVC pipes and fittings of different dia with ISI mark including loading and unloading at both ends with all cost of materials,labours,T&P,,taxes,royalties etc.All complete as per direction of engineering in charge. (Excluding GST)

110mm PVC Pipe

75mm PVC pipe

110mm PVC door bend

110mm PVC plain bend

110mm PVC P trap

110mm PVC S/J with door

110mm PVC D/J with door

110mm PVC offset

75mm PVC door bend

75mm PVC plain bend

75mm PVC S/J with door

75mm PVC D/J with door

75mm PVC Cowl

110mm PVC Cowl

75mm PVC Clamp

110mm PVC Clamp

Cement

Bamboo

Engagement of Hydraulic Excavator of 1cum bucket for each work excavation during execution of work including supply of operator,fuel tools and plants etc all completeas directed by engineering in charge.(Excluding GST)

Engagement of chain mounted poclain hydrolic exavator having 2 Cum bucket capacity for deep excavation in slushy soil towards attending the repair work to water supply pipe line & re-filling after completion of repair work with supply of machinery, POL hire & running charges etc all complete as per direction of Engineer-in-charge.(Excluding GST)

Cement concrete (1:1.5:3) for mionor repairs using 12mm to 20mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge.Excluding GST

Supply Tor/TMT steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour, materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient).Excluding GST

16 MM thick Cement plaster in third floor ( outside)with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge. Excluding GST

Brick work in Fly Ash Bricks of size 25cmx 12cm x 8cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge. Excluding GST

In 3rd floor

In foundation plinth

25mm. thick A.S. flooring in cement concrete (1:2:4) at 3rd floor using 12mm. and down grade hard black C.B granite chips of approved quality including mixing, hoisting, laying, compacting, curing, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including cost of supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding cost of GST as per direction of Engineer-in-charge. (Repair work). Excluding GST.

Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, etc. complete but excluding cost of GST as directed by the Engineer-in-charge. Excluding GST.

Supplying fitting fixing of 8mm thick ceramic floor tiles ( premimum Quality 300 x300 mm or 400 x 400 mm size)in 1st floor, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.

Removal of sewage & sludge from septic tank and sewage sump by using gully tanker or equivalaent machine and deposing it at designated place with supply of all materials labour, t&p etc all comple as per direction of Engineer-in-charge. (Excluding GST)

Supplying of Labour for managing day to day work of residential building at Nuabazar, V-Point & CISF Complex area etc all complete as per direction of Engineer -in- Charge.(Excluding GST ) NB:(i)The rate of wages against the Item No.24 should not be qouted less than the minimum wages as approved by the govt. of India/PPA . (ii) EPF and ESI of the contract workers will be paid by the contractor every month. (The payment of EPF& ESI will be reimbursed as per actual on submisison of supporting documents.)

Skilled Labour

Semi-Skilled Labour

CIS GLOBAL INFRATECH PVT LTD