GE/CHM-77/2021-2022 PROVN OF GUARD ROOM WITH ATTACHED TOILET CUM BATHROOM ROOF TREATMENT FOOTPATH AND VENTILATION FANS OF MD ACCN AT CHANDIMANDIR

Amount

Surface excavation to required camber and gradient not exceeding 30 cms deep and averaging 15cms deep and getting out in soft /loose soil, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc, laying of pipes, cables, poles, stay or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard /dense soil, complete all as specified & directed.

Removal excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil complte all as specified and directed.

Material and labour plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, complete all as specified & directed.

Material and labour plain cement concrete 1:5:10, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.

Material and labour for brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Material and labour RCC (M-30 design mix, using 20mm graded crushed stone aggregate) as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour reinforced cement concrete (M-25 design mix, using 20mm graded crushed stone aggregate) as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour reinforced cement concrete (M-25 design mix, using 20mm graded crushed stone aggregate) as in coloumns, pillars etc complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour reinforced cement concrete (M-25 design mix, using 20mm graded crushed stone aggregate) as in chajjas etc complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work, vertical or to batter to give rough finish to flat surfaces complete all as specified and directed.

Material and labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified.

Material and labour form work to sides of pillars, coloumns and similar items (square, rectangular or polygonal) including edges rough finished surface of concrete flat complete all as specified and directed.

Material and labour, form work to, chajjas and similar items including edges for fair finished surface of concrete complete all as specified and directed.

Material and labour mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.

Material and labour mild steel TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hoping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

Material and labour, 15mm thick rendering in cement mortar 1:6 on brick walls or concrete surface and finished even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements as per site requirement complete all as specified & directed.

Material and labour, 15mm thick rendering in Cement and Sand mortar 1:4 over concrete /brick surfaces finished fair and even without using extra cement, and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.

Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.

Material and labour, 5mm thick rendering in Cement and Sand mortar 1:3 over concrete /brick surfaces finished fair and even without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.

Material and labour preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Material and labour, preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Material and labour, three coats of white wash on ceiling surfaces including preparation of new surfaces complete all as specified and directed

Material and labour for spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete, all as specified.

Material and labour hard core of broken stone or boulders of gauge of guage n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Material and labour 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in flooring, finished even and fair complete all as specified and directed.

Material and labour non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 Square metre but not exceeding 0.38 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour, plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 75mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.

Supply and fix, steel window, box type, primer coated, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: (i) Glass panes, MS wire cloth & painting shall be measured & paid separately under respective items. (ii) MS flat iron for fixing of wire cloth and window shutters shall be included in the item rate.

All as per serial item No 30 hereinbefore but without glazing bar.

Supply and fixing 4mm thick tinted / frosted sheet glass any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes, complete all as specified and directed.

Supply and fix Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including fill of PCC 1:3:6 complete all as specified and directed.

Supply and fixing 30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides , BWP,complete all as specified & directed by Engineer-in-charge.

Material and Labour preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and Labour two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.

Supply and fix Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

Supply and fix Aluminium, anodized barrel tower bolts of extruded section and fixed, 125mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

Supply and fix Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.

Supply and fix Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.

Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.

Material and labour plain cement concrete 1:3:6, type C2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete, bed blocks etc, complete all as specified & directed.

Material and labour rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290.Gde-E-165,complete all as specified and directed.

Supply and fix for Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge

Supply and fix pre-painted galvalume aluminium zinc (AZ-70) coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

Material and labour Gypsum Board 12mm thick in ceiling on and including standard GI snap grid powder coated, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm (GI snap grid consisting of 1mm thick standard GI sections i.e. channel, angle, tee etc for intermediates, parameters etc) supported with 1mm thick standard GI section, fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, complete all as specified and directed.

Material and labour for 12mm thick pre laminated particle board (ISI Marked), exterior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping fixed with nails, complete all as specified and directed .

Supply and fix, powder coated aluminum frame/ chowkhat for doors, windows, partition, ventilator etc with one or more rebates including joinging cleats for fixing etc standard anodized aluminum section, powder coating not less than 50 micron, complete all as specified and directed Note : Shutters shall be measured and paid separately "as supply and fix" under respective items.

Supply and fixing, factory made glazed / polished chequered cement concrete tiles 300mm x 300mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Material and labour for machine coloured pressed precast concrete interlocking paver block, with grey cement and no pigment, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade, set and jointed in neat cement slurry over 25mm thick sand cushion complete all as specified and directed

Material and labour for machine coloured pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 grade, set and jointed in neat cement slurry over 25mm thick sand cushion complete all as specified and directed

Supply and fix framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.

Material and labour glazed ceramic tiles, coloured in vertical surface 350mm x 450mm x 7mm, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Supply and fixing for 15mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 and taking down existing tubing complete all as specified and directed.

Supply and fixing for 20mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 and taking down existing tubing complete all as specified and directed.

Material and labour CI floor trap 100mm dia with grating including jointing to waste pipe with run led jointed and seting in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, complete all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fix stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fixing for tubular towel rail Brass CP, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.

Supply and fixing central hole Basin Mixer , with regular spout with popup waste system with 450mm long braided hoses,15mm bore, cast copper alloy, chromium plated, fancy type, complete all as specified and directed MAKE : JAQUAR Cat Part No QQT-7169B or equivalent in JAINKO, PRAYAG

Supply and fixing wall mixer with provision for overhead shower with 115mm long bedn pipe on upper side, connecting legs and wall flanges, 15mm bore, cast copper alloy chromium plated, fancy type complete all as specified and directed . MAKE : JAQUAR Cat Part No QQT-7273UPR or equivalent as per appx 'C'

Supply and fixing single piece Water Closet with PP seat cover, hinges, fixing accessories set, cistern fittings, size 360mm x 640mm x 690mm, S Trap-110mm complete all as specified and directed . MAKE : JAQUAR Cat Part No SLS-WHT-6851S or equivalent as per appx 'C'

Supply and fixing cast Toilet paper holder, cast copper alloy, chromium plated fixed in position, complete all as specified and directed.

Supply and fixing 100mm dia chromium plated grating, complete all as specified and directed.

Supply and fixing hand jet chromium plated (health faucet with 01 m PVC pipe) for 15mm bore with fittings, complete all as specified and directed.

Material and labour for vitrified coloured tiles, jointless, first quality, of size 600mm x 600mm x 10mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Supply and fixing 5mm thick glass mirror of size 700mm x 500mm with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection complete all as specified and directed. MAKE : CERA Cat Part No B3510112 or equivalent

Supply and fix 20mm bore Gun-metal, globe or gate valves(Quarter turn), with MS lever handle, screwed both ends for iron pipe complete all as specified and directed.

Supply and fix angular stop cock, brass, cast copper alloy, chromium plated fancy type, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. MAKE : JAQUAR Cat Part No FON-40053 or equivalent in JAINKO, PRAYAG

Supply and fixing corner glass shelf Chromium plated with brackets complete all as specified and directed. MAKE : JAQUAR Cat Part No ACN-1173 or equivalent in JAINKO, PRAYAG

Supply and fixing shower basket small complete all as specified and directed. MAKE : JAQUAR Cat Part No CAN-1177N or equivalent in JAINKO, PRAYAG

Material and labour for cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. (Cement concrete item shall be reinforced, where ordered. Reinforcement shall be measured and paid separately.

Material and labour for plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed.

Material and labour for salt- glazed stoneware drain pipe grade ‘A’ 150mm bore, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.

Material and labour for factory made RCC (Medium duty), M-35 reinforcement steel as per IS 456, pre cast man hole covers of size 1200mm x 600mm x 100mm with plain faces, including MS frame, set in position complete all as specified.

Supply and fix PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) vent cowl any radius complete all as specified and directed.

Supply and fix Cera wood vanity cabinet floor mounting wash basin, size of cabinet 1000 X 350 X 785 mm, wash hand basin colour (white) complete all as specified and directed MAKE : CERA Cat Part No CAB 1036 or equivalent as per appx 'C'

Material and labour, cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) or PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, and removal of rubbish outside MoD land, complete all as specified and directed.

Material and labour point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit 20mm bore, terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.

All as per serial item 82 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed

All as per serial item 82 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 82 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Supply & Fixing for switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as directed

Supply & Fixing for switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as directed

Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 6 Amps flush type ISI marked all as specified and directed

Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 6/16 Amps flush type ISI marked all as specified and directed

Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Supply and fix indoor decorative extruded aluminium anodized housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED batten type luminaries' (LED batten shall be prewired box type, retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 4 feet (appx) size, high efficiency electronic driver, system wattage not more than 20 watt (lumen output not less than 2000 lumen), power factor more than 0.9, with surge protection device minimum 2KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glare free, no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sq mm". Make C&S Electric/Surya Roshni/ Crompton Greaves/ Havells/ Philips

Supply and fix for Lamp holder, 6 Amp 240 volts PVC/Polycarbonate type with back plate angular type fixed on wall suitable for batten fitting icomplete all as specified and directed.

Supply and fix for LED Lamp 9 watts, 240 volts complete all as specified and directed.

Supply and fix for bulk head fitting in engineering plastic housing with clear prismatic diffuser 6 watt capacity complete all as specified and directed.

Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, of metal 8 way all as specified.

Supply & Fix for MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

Supply & Fix for MCB ,SPN , 240 volt, 40Amps, 10 KA , 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

Supply and fix metalic body exhaust fan 300mm sweep, 240 volt, 50 Hz, with louvers heavy duty, 900 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed. MAKE : Havell's / BAJAJ/Crompton/Khaitan

Supply and fix metalic body exhaust fan 225mm sweep, 240 volt, 50 Hz, with louvers heavy duty, 900 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed. MAKE : Havell's / BAJAJ/Crompton/Khaitan

Cutting openings, through brick walls in round shape , for 225/300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge.

Supply and fix electric water storage heater (vertical type geyser) 25 ltr 230 volts, 5 star ,AC single phase with and including stainless steel tank, heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolt etc as per site requirement, making necessary inlet / outlet water connection and electric connection, testing on load for full satisfaction of Engineer-in-Charge

Supply and fix Non return valve (brass) 15mm bore size fixing in inlet pipe of geyser complete all as specified and directed

Supply and fix PVC connection 450mm long hot/ cold water heavy duty made out of double layer Nylon & wire fabric at pressure 6 Kg /cm both side, CP brass 15mm bore coupling or nuts complete all as specified and directed.

Supply and fix, stop valves , cast copper alloy, chromium plated, screwed down high pressure, with any type of handle, screwed both ends for 15mm dia bore iron pipe or for brass ferrule, complete all as specified and directed.

Material and labour Screwing existing 15 mm bore, ‘medium grade’, galvanized tubes, for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.

Supply and fix bib tap, cast copper alloy, chromium plated, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. complete all as specified and directed.

M/s Krishan Aggarwal

VRIDHI ENTERPRISES

M/s Om parkash

Bharat Engineering and Products

BANSAL BUILDERS

M/s Nuway Constructors India Pvt. Ltd.

M/s Super Trading Corporation

chahalbuilders