Loading
Loading…
Loading…
Tender Value
₹22.0 L
EMD Value
₹44,000
Closing Date
12 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CPH
25 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer must satisfy himself that he has the capacity (Men, material and resources) to complete the work within the stipulated period mentioned in NIT from the date of issue of Letter Of Acceptance
The contractor must abide by and comply the provision of contract labour (Regulation & Abolition) Act, 1970 and Central Rules, 1971.
Tenderer should note that post tender correspondence regarding submission of credential or additional documents in support of credentials/eligibility criteria (i.e. other than those uploaded with the tender offer on IREPS System ) shall not be accepted manually or entertained by Railway. However , Railway administration reserves the rights to seek clarification on the credentials received along with the tender documents and to verify their genuineness for deciding the tender.
1. The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of e-tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders through the website after the opening of the tender. Note: For more details of General Instruction-Chapter-I for Submission of Bid Security, Cost of Tender Document and opening of e-tender. Tenderers are requested to go through the following documents which are available in upload/View Documents in Home page of IREPS portal for works tenders before submitting the e-tender. 1. General Instruction for ETenders on works contract--Chapter- I 2. Special ConditionGeneral- Chapter-II.
GST is applicable hence rates to be quoted including all types of taxes, levies and charges
1. The work will be completed within the period of completion as mentioned in the NIT from the date of issue the acceptance letter. 2. The quantity mentioned against the above item is approx & for tendering purpose only, where as payment will be made actual work done. 3. If the tenderer is failure to start to the work within 15 days from the date of acceptance of the tender under Clause-19.2 of GCC-2022 contract may be terminated as per provision of clause of GCC 2022. 4. Trade license/ labour license must be submitted before execution of agreement as per extant rule. 5. In case of any discrepancies in rate and unit between annexure and USSOR 2021 schedule, the rate & unit USSOR 2021 and DSR-2021 schedule will prevail.
Tenderers must follow the Instructions to Tenderers and Conditions of Tender as mentioned in the uploaded Tender Document before participating in this Tender.
Development of sports infrastructure at CLW, Chittaranjan
EL-CON-536~CLW
EL-CON-536
Open
Works - General
5 Months
Paschim Bardhaman, West Bengal
₹0
₹44,000
19 Sept 2026
19 Sept 2026
28 Sept 2026
30 items across 1 schedule · ₹21,99,003.57 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Luminaries: Supply & Installation of High-quality 80W Highbay with Long life & photo biologically safe LEDs, SYSTEM EFFICACY 150LPW, CRI>80, High-performance electronic driver ensures zero maintenance, No harmful UV & IR radiations. Environment friendly as it does not contain Mercury, Instant light with low running temperatures, Rated Ta: -10°C to +50 °C, Safety Operational temperature, 10°C to +55 °C, Operating voltage range: 140 V - 270V, Average life L70B50:50000 hours, Surge Protection upto 10 kV available on Request, Pressure die-cast aluminum alloy housing with polyester powder coating (heat sink for efficient, thermal management, sturdiness & excellent corrosion resistance. SS Hardware, silicon gasket, and cable gland are used for cable entry for maintaining ingress protection, High-efficiency long-life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >175 lm/W and viewing angle of 120° to ensure better uniformity, High-quality Polycarbonate cover with integrated lens for uniform distribution, Photometric data, Built-in potted IP66, electronic LED driver with APFC (SMPS-based constant current supply), lower THD, Open Circuit protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885Part-2/Sec 13 & CISPR15. | Numbers | 15.00 | 16,966.04 | 2,54,490.6 |
| 2 | Cables: Supply of Copper conductor, PVC insulted flexible cable as per IS 694 of following sizes 3Cx2.5 sq.mm. | Metre | 750.00 | 181.78 | 1,36,335 |
| 3 | Earthing: Supply, installation, testing and commissioning of proper, maintenance-free earthing compound, long-life zinc-coated earthing. The job shall also includes supply, laying, and connection of G.I. flat 25 x 6 mm. thick from earthing pit to Distribution panel & G.I. Earth terminal bar on the Panel and G.I. earth wire 8 SWG to be laid from earth terminal bar to Distribution Panel. The job shall also include the supply and erection of G.I. earth terminal bar & G.I. earth wire. | Numbers | 2.00 | 13,039.68 | 26,079.36 |
| 4 | Cutting of channel on the wall 75 mm deep with suitable wide for laying of PVC conduit/Alkathine pipe 25 mm dia. (Medium Gauge) of ISI marked for concealed wiring and make good by replastering with cement sand (1:4) then putty and painting of wall similar to match surrounding paint. | Metre | 40.00 | 40.77 | 1,630.8 |
| 5 | Supply, erection, connection, and commissioning of 2 runs of 1 core 6 Sq mm PVC insulated unsheathed (Multi-strand) flame retardant with flexible bright annealed copper conductor cable conforming to IS: 694-1990 for 1100 volt grade along with 1 core 0.75 Sq mm PVC insulated earth continuity conductor cable run through 25mm casing caping / PVC conduit /Alkathene pipe medium gauge (For concealed conduit wiring or other work if required) including supply of casing caping/ PVC conduit /Alkathene pipe. | Metre | 50.00 | 107.03 | 5,351.5 |
| 6 | Supply, erection, connection, and commissioning of 2 runs of 1 core 4 Sq mm PVC insulated unsheathed (Multi-strand) flame retardant with flexible bright annealed copper conductor cable conforming to IS: 694-1990 for 1100 volt grade along with 1 core 0.75 Sq mm PVC insulated earth continuity conductor cable run through 25mm casing caping / PVC conduit /Alkathene pipe medium gauge (For concealed conduit wiring or other work if required) including supply of casing caping/ PVC conduit /Alkathene pipe. | Metre | 100.00 | 94.8 | 9,480 |
| 7 | Supply, erection, connection, and commissioning of 2 runs of 1 core 1.5 Sq mm PVC insulated unsheathed (Multi-strand) flame retardant with flexible bright annealed copper conductor cable conforming to IS: 694-1990 for 1100 volt grade along with 1 core 0.75 Sq mm PVC insulated earth continuity conductor cable run through 25mm casing caping / PVC conduit /Alkathene pipe medium gauge (For concealed conduit wiring or other work if required) including supply of casing caping/ PVC conduit /Alkathene pipe. | Metre | 175.00 | 46.89 | 8,205.75 |
| 8 | Supply, installation and connection of Modular switch 6 A, 230V. | Numbers | 25.00 | 61.16 | 1,529 |
| 9 | Supply, installation and connection of Modular 3 Pin socket 6A, 230 V | Numbers | 6.00 | 150.86 | 905.16 |
| 10 | Supply, erection, connection and commissioning of 5 in 1 Power wall socket board 6A/16A, 230V with switch, fuse, indication lamp combination unit. | Numbers | 8.00 | 260.94 | 2,087.52 |
| 11 | Supply, erection, connection and commissioning of Ceiling rose 6A, 230 V PVC round block on 2 module Plastic Box with the required size of 3mm hylum sheet and connection with flexible PVC twin twisted Cu Cable to appliance. | Numbers | 30.00 | 110.29 | 3,308.7 |
| 12 | Supply, installation and commissioning of 5''x5'' G.I. box (Junction box) with hylum sheet of suitable size to cover. | Numbers | 5.00 | 230.37 | 1,151.85 |
| 13 | Supply, erection, and connection of surface mounted 22W LED batten tube light fittings with polycarbonate housing and integrated electronic driver along with PVC insulated copper wire for connection as per IS:694-1990, complete with all fixing accessories and hardware, including suitable surface or hanging arrangement for ceiling mounting as per requirement. | Numbers | 15.00 | 577.94 | 8,669.1 |
| 14 | Supply, installation and commissioning of recessed mounting Modular Switch Board provided with flush metal 12 Module G.I Box and combined plates for requisite size including cutting of wall with supply of all materials for cement plaster finishing of damaged wall. | Numbers | 4.00 | 645.98 | 2,583.92 |
| 15 | Supply, erection, connection and commissioning of Modular wall socket 3 pin, 16A 230V A.C. including supply of 2 Module surface recessed mounted G.I. box with combined plate of requisite size and fixing accessories with hardwares.(for AC). | Numbers | 3.00 | 448.5 | 1,345.5 |
| 16 | Supply, erection, connection and commissioning of Modular 25A Starter Switch including supply of 2 Module Plastic box with combined plate of requisite size and fixing accessories with hardwares including cutting of wall with supply of all materials for cement plaster finishing of damaged wall to its original decor for AC Machine. | Numbers | 3.00 | 662.55 | 1,987.65 |
| 17 | Supply of 60 Watt LED Flood light fitting with integrated driver. | Numbers | 6.00 | 1,856.46 | 11,138.76 |
| 18 | Installaltion, connection and commissioning of LED Flood light using 1metre long GI pipe of suitable dia compatible with Flood light fitting including GI clamps, GI strips, bolts, nut with neccessary hardwares and painting with anti- corrosive red oxide primer and painted with aluminum paint along with 2 runs of 1 core 1.5 Sq. mm. PVC sheathed stranded Copper conductor cable 650/1100 Volt grade connecting cable. | Numbers | 6.00 | 770.25 | 4,621.5 |
| 19 | Supply, installation, testing, and commissioning of Exhaust Fan System designed to ensure efficient ventilation, removal of stale air, fumes, heat, or humidity from the designated space | Numbers | 10.00 | 1,925.63 | 19,256.3 |
| 20 | Supply, installation, connection and commissioning of 3Ø/1Ø, 4-way MCB operated distribution board comprising of 01 No. 63A FP, 30KA MCCB as incomer and 06 Nos. 20A SP MCB and 06 Nos. 10A SP MCB as outgoing feeders enclosed in a powder coated / Synthetic stove enamelled grey paint sheet steel enclosure. The D.B. shall be recessed into the wall including the supply of fixing accessories and hardwares. | Numbers | 1.00 | 10,042.51 | 10,042.51 |
| 21 | Supply, installation, connection and commissioning of wall mounted bracket fan sweep 400mm with all accessories . Make:- Orient/ Khaitan/Usha/Bajaj/Havells | Numbers | 10.00 | 1,877.78 | 18,777.8 |
| 22 | Supply, installation, testing and commisioning of TPN Change Over Switch of rating 200A, 415V AC. | Numbers | 1.00 | 25,895 | 25,895 |
| 23 | Supply, instalaltion, testing and commisioning of Outdoor Type LT Distribution Panel(As per technical specification)1. General Description(a) Type: Outdoor-type LT Distribution Panel made of SS-304 Sheet.(b) Bus Bar: Electrolytic copper, 400A, 3-phase and neutral, designed with appropriate clearances and color- coded insulations.2.Breaker Details2.1 Incoming Feeder: Rating: 1no. 250A, MCCB, 4 Pole, 415V AC, 50kA,(Adjustable overload and shortcircuit protection)2.2 Outgoing Feeders: (a) 2 No. 125A MCCB,4 Pole, 415V AC, 10kA (Adjustable overload and shortcircuit protection)(b) 63A MCB,4 Pole, 415V AC, 10kA -4 Nos. Make of Switchgear:L&T/Siemens/ABB/Schneider.This Work includes making of the concrete foundation of the required Size for installation of LT Panel including supply of all required masonry materials. | Numbers | 1.00 | 1,57,654.43 | 1,57,654.43 |
| 24 | Supply of outdoor type L.T. distribution panel (As per technical specification)1.General Description(a) Type: Outdoor-type LT Distribution Panel made of SS-304 Sheet. (b) Bus Bar: material- Electrolytic copper, current rating- 1250A, 3-phase and neutral, designed with appropriate clearances and color- coded insulations.2. Breaker Details:2.1 Incoming Feeder: - 630 A, 4Pole, 415V AC,50KA, (Adjustable overload and shortcircuit protection) MCCB - 1 No.2.2 Outgoing Feeder: - a). 200A, 4Pole, 35KA, 415V AC AC (Adjustable over load and shortcircuit protection) MCCB - 8Nos., Make of Switchgear:L&T/Siemens/ABB/Schneider. | Numbers | 1.00 | 3,11,127.62 | 3,11,127.62 |
| 25 | Installation, connection, testing and commissioning of the above L.T. distribution panel. This work includes 1. Removing of existing Panel. 2. Disconnection of Cable from Existing Panel 3. Removing of foundation 4. Making of concrete foundation for new panel 5. Installation of new cable glands for incoming and outgoing power cables 6.Connection of power cable to Panel using end termination lugs(including supply of lugs). | Numbers | 1.00 | 34,569.74 | 34,569.74 |
| 26 | Supply of 4 core 95 Sq mm XLPE insulated and PVC sheathed stranded, screened steel strip armoured Aluminium conductor cable 1.1KV grade as per IS: 7098 (Pt.I). | Metre | 500.00 | 527.79 | 2,63,895 |
| 27 | Digging of earth and formation of kuchcha cable trench of size 750mm deep x 300 mm wide including supply and laying of bricks and sand filling, compacting of soil after laying of cable as per Drg. | Metre | 450.00 | 356.73 | 1,60,528.5 |
| 28 | Laying of 4 core 95 sq. mm cable. | Metre | 500.00 | 20.31 | 10,155 |
| 29 | Supply of 2 Core 25 Sq. mm.cable XLPE insulated and PVC sheathed stranded Aluminum conductor steel strip armoured cable 1.1 KV gradecable as per IS: 7098 (Pt.I). | Metre | 3000.00 | 117.7 | 3,53,100 |
| 30 | Supply of 2 Core 16 Sq. mm.cable XLPE insulated and PVC sheathed stranded Aluminum conductor steel strip armoured cable 1.1 KV grade cable as per IS: 7098 (Pt.I). | Metre | 3000.00 | 117.7 | 3,53,100 |
| Schedule total | ₹21,99,003.57 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11_compressed1.pdf
ATTACHMENT
GCCFOR2022.pdf
ATTACHMENT
CTIndianRailwaysStandardGeneralConditionsofContractApril-
ATTACHMENT
CTIndianRailwaysStandardGeneralConditionsofContractApril-
ATTACHMENT
2022_CE-I_CT_GCC-2022Policy14_07_2022.pdf
ATTACHMENT
ACS7GCC2022.pdf
ATTACHMENT
ACS8GCC2022.pdf
ATTACHMENT
GCCUpdateduptoACS-7RAILWAYSBOARD.pdf
ATTACHMENT
LetterregardingAnnexureV.pdf
ATTACHMENT
ACS10GCC2022.pdf
ATTACHMENT
ACS9GCC2022.pdf
ATTACHMENT
CTIndianRailwaysStandardGeneralConditionsofContractApril-
ATTACHMENT
GCCACS12_compressed1.pdf
ATTACHMENT
2023_12_21IndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_6ACS-61.pdf
ATTACHMENT
2023_04_26RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_4ACS-4.pdf
ATTACHMENT
2022_12_13RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril2022ACSNo_2.pdf
ATTACHMENT
2023_10_20RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_5ACS-53.pdf
ATTACHMENT
2023_04_26RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_3ACS-311.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .