REPAIR/ CLEANING OF SEWAGE LINES, MANHOLES, SEPTIC TANKS, SOAKWELL AND REPAIR/ REPLACEMENT OF GATE, REPAIR TO COMPOUND WALL, PATH, DRAIN, FENCING, CULVERT, GARBAGE BINS, SHEDS AND OTHER MISC WORK IN OTM AND MD ACCN IN ZONE-VI UNDER AGE B/R-IV OF GE

Amount

Dewatering of Septic tank soakage well and manhole of any depth in any position by pumping out and removing outside Military/Defence land by mechanical means (trolley mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after absorption of water and including providing and spreading required quantity of bleaching powder around the pit or dispose of waste material as per state protocol and washing the top of septic tank & soakage wells and surrounds with fresh water and sprinkling lime to make hygeinic complete all as specified and directed.

De-sludging of septic tank of any capacity including connected intercepting chamber, manhole shaft, sludge chamber & filterbeds of any description and in anmy position by pumping out and removing of sludge outside Military/ Defence land by mechanical means (trolly mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after filling of sludge and including providing and spearding required qty of bleaching powder or dispose of waste material complete as per state protocol, including taking down of slab cover and placing the same in existing postion complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drain of 150 mm dia pipe making good to pipes and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1, smooth finished, and reforming benching as required, complete all as specified and as directed

M&L 150mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 150mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe ( salt glazed stone ware) complete all as specified and directed.

M&L 200mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 200mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe ( salt glazed stone ware) complete all as specified and directed.

M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified and directed.

M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 200 mm dia pipe work in foul position complete all as specified and directed.

M & L for providing PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channel or drains complete all as specified and directed

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Material & labour for brick work with fly ash bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks old size , straight or curved on plan exc 6m mean radius, built in CM (1:6), straight or curved on plan exc 6m mean radius, built in CM (1:6) including complete all as specified and directed.

Material & labour for brick work with old size bricks in CM (1:6) straight or curved exceeding 6mtr mean radius Except bricks including cleaning and reusing old bricks complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.all as specified & directed.

M&L for pcc 1:3:6 type C1 using 20mm graded stone aggragate as in bed blocks, coping plinth protection etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed.

M & L rendering 15 mm thick in cm 1:4 on fair faces of brick wall finished even and smooth(without using extra cement) complete all as specified and directed.

M & L rendering 15 mm thick in cm 1:4 on other than fair faces of brick wall finished even and smooth(without using extra cement) complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out joints hacking for key, scrubbing down with water etc complete all as pecified and directed.

Demolition cement concrete in ground floor and paving not exceeding 15 cm thickness (below or above ground level) un-reinforced as in PCC benching PCC bed, PCC sub-base including removal of existing chequered and interlocking tiles for replacement of existing SWG pipe etc complete all as specified and directed.

S & F mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking banding spirally including binding with annealed wire not less than 0.9 mm dia complete all as specified and directed.

All as per item No 20.00 here-in-before but 6 to 8 mm dia complete all as specified and directed.

M & L RCC nominal mix 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in soak well/septic tank etc complete ( cast in situ) including as per requirement of form work including demolition of RCC complete all as specified and directed.

M&L for cleaning of sewage lines, manhole by rodding and well flushing the sewage lines after removing of sludge including taking off the manhole cover and refixing after cleaning of manhole of any size and depth. The manhole lines to be cleaned manually/mechanical sludge to be removed to outside of the cantt area complete all as specified and directed. Note:- (a) The contractor shall provide sufficient labours everyday to cater for all type of complaints (b) the period of complaints for each complaints sahll be 24 hours. (c) it will be the responsibility of the contractor to get the complaints completed with in stipulated period the labour shall be made available during the office hours for any complaints. (d) The payment shall be made to the contractor on the basis of complaints slips. No payment shall be done for any incomplete work. (e) The contractor to quote the rates accordingly.

All as per item No 23.00 here-in-before but cleaing the blockage of WC's, toilets, kitchen, sink

M & L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate)for manhole cover including placing and set in CM 1:4 complete all as specified and directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified and directed.

Material & labour for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring, surface finished even and smooth by using extra cement complete all as specified and directed .

Supply only 3mm thick and 38 mm wide glass strips as in floor complete all as specified and directed .

Supply and fix in repair for 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls as in waste complete all as specified and directed.

Supply and fix in repair for 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. as in waste and rain water pipes complete all as specified and directed.

Supply and fix in repair PVC bends 75mm bore, any radius complete all as specified and directed.

Supply and fix in repair PVC bends 110 mm bore, any radius complete all as specified and directed.

S&F in repair 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110mm PVC (SWR) 'S' trap complete all as specified and directed.

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

Returning , filling in including spreading , levelling , watering and well ramming in layers not exc 20 cm in solft/loose soil complete all as specified and directed.

Removing excavated material n exc 45 m and depositing where directed at a level n exc 1.4 m above the starting point soil complete all as specified and directed.

S&F RCC jalli 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) size 600x750 of 25mm thick (measured solid) including all factory made moulding complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and directed.

Taking down existing barbed wire of any description complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling chain link fencing wire mess of any type complete all as specified and directed.

Dismantling posts and struts (wood, steel or RCC) any section, including taking out embeded portion and making good disturb ground complete all as specified and directed.

S&F Mild steel angle iron post as in fencing posts, cut to length, drilling holes, welding and embedded,flat iron as in fastening of chain link fencing fixed to nuts and bolts including holes in concrete complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. incl provision of binding wire complete all as specified and directed.

Supply only chain link fencing of mesh size 50mmx50mm and 3-4 mm dia wire made upto into matresses complete all as specified and directed.

S&F flat iron as in fastening of chain link fencing fixed to nuts and bolts including holes complete all as specified and directed.

S&F Mild Steel flat, round or square bar for straining, in available length, cut to length, bent to shape required Fe-410W (Gde E-250) quality 'A' complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing complete all as specified and directed.

S&F for Framed work such as grills, gratings with ends of bars shouldered and/ or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, including for ornamental and intricate design complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, not otherwise described over 10cm width or girth and complete all as specified and directed.

M & L framed work as in doors, door chowkats or gates of angle iron or other section with gusset plate, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Supply & fixing Mild Steel works (Miscellaneous) as in hold fasts etc and similar small articles confirming Fe-290 Gde-E-165 complete all as specified & directed.

S&F 1.00 mm th.mild steel, plain, black sheet in hearths; covering to Manhole cover covering to door chowkats (frames); chullah hoods; water tanks; water troughs: ducts; urinal trought and funnels etc cut to size edges beads, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seanes including bending turning up mitred engles, stopped ends, outlets, etc. as required complete all as specified and directed.

M&L 20mm thick Granite (of any type) tiles machine cut in skirting/dado over 15mm thick plater in CM (1:4) & jointed witht grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing complete all as specified and directed.

M&L Coloured / Black Glazed ceramic tiles in vertical surfaces 450x300x7mm/300x300x7 mm thick, Joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick plaster in CM (1:4) including dismantling of old tiles complete all as specified and directed.

M&L for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L for laying 80 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L Sand for cushioning, including spreading and levelling in layers n exc 25 mm thick complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for extra for forming fair finished drain or channle 30cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Material and labour for reinforced concrete pipes, class NP2, 300mm bore with collars, laid and jointed, fixed as in repair complete all as specified and directed (Excavation & earth work and PCC shall be measured and paid for separately) complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coates of white wash complete all as specified and directed.

Cleaning of underground Horizontal sewage pipe of any dia upto 200mm (Cleaning length n.exc 30m from manhole to manhole or from manhole to septic tank) including taking off manhole cover and cleaning of manholes of any size and depth and removing waste material/sludge to a distance of n.exc 300m and burrying in a pit and replacing manhole cover in position after cleaning complete all as specified and directed.

M/S KAPIL ENTERPRISES (BID ID -3357211)