Loading…
Loading…
Tender Value
₹4.9 L
EMD Value
₹9,900
Closing Date
7 May 2026, 11:00 amClosed
Executive Engineer Electrical Division HPPWD. Una
Executive Engineer Electrical Division HPPWD. Una
.
2026_PWD_135262_1
NIT No. 641-60 dated 21/04/2026
Open Tender
Electrical Works
Percentage
180 days
Una
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
₹9,900
19 May 2026
28 Apr 2026
7 May 2026
28 Apr 2026
7 May 2026
28 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supplying and fixing of following sizes of PVC conduit 2.0mm thick heavy duty ISI mark along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-as per best satisfaction of Engineer-in-charge. Diplast/AKG/Polycab. | |||||
| 1.01 | 25 mm. dia | 4,700 | Metres | 102 | ₹4,79,400 |
| 1.02 | Supplying and fixing of MS fan box fabricated out of 16 SWG MS sheet and MS round of 12 mm dia.as required complete in all respects as per best satisfaction of Engioneer-incharge. L&T/Legrand/ABB. | 140 | Nos. | 101 | ₹14,140 |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.64 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.79 MB
SBD.pdf
Tender Documents • 4.42 MB
BOQ_200325.xls
BOQ • 0.28 MB
undertaking.pdf
Additional Documents • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .