WBPHED/07_01/AE-III/CMD/25-26

Amount

Supply and delivery at site of vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification: Pump : Discharge (Q) : 24mᶟ/Hr., Head (H) : 56 mtrs. Method of starting : DOL, Shaft-stainless steel, Impeller- NORYL/Crome Steel/S.S/ GM, Casing - CI, Outlet - 50/65 mm dia Motor : Operating Voltage : 415 (± 10 %), Phase : 3ph, 50 Hz ± 6%, S1, water cooling, Speed : 2900 RPM, Method of starting : DOL Make : KSB / Grundfos / Texmo / CRI / KBL / MBH / or any approved vendor. ( N.B : Manufacturer's test certificate along with charecteristics curve and gurantee certyificate have to be submitted at the time of delivery.)

Supply and delivery of 3mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. (Make-Ashirbad/PHE dte approved make)

Supply and delivery of 1.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. (Make-Ashirbad/PHE dte approved make)

Supply and delivery of 80mm dia. CI Top & Bottom adopter.

80mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for wash out line. (MOC & TC needed for valve).

80mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312) (MOC & TC needed for valve).

Supply & delivery of Three Phase Submersible Pump Controllers (with Single Phase Preventer) for Submersible Pump with Realy Range (13-21)A. Coil voltage - 415V, [Model - MU-G10 DOL, (With Wideband Coil)], (Make-L&T/PHE dte approved make)

Supply delivery at site of 4sqmm 3 core 1.1 KV Grade flat submersible copper conductor cable . (Make:- Finolex / Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

Supply & delivery at site of 16 mm² x 4 core Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC. (Make:- Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

Supply & delivery of 63 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3). (Make: Approved Vendor list of PHED.)

Supply and delivery of CIDF 90°bend- 1no., CI flanged tee- 1no., blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-2no, CI/ MS flanged pipe 1mtr.- 1 no. etc (as per IS specification and certification registered) for construction of 1nos delivery pipe line and wash out line.

Supply and delivery of Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

Supply and delivery of Heavy type 250mm dia./suitable Split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design.

Supply and delivery of Anti snapping safety device for pump set by supplying suitable size of MS angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials.

Making brick pillar 0.25 x 0.25 x 0.75 Mtr/Suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete. (Both Pipe line)

Supply and delivery of 40mm dia PVC pipe (Sch-40) (Make- Any make of PHED Approved) (For Flat cable laying through From PH to TW)

Installation of Submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover and specials of above with protection pipe and supply of MS clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of all cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of EIC. This including the cost for installation of starter on wall after necessary power cable connection after laying of cable on wall with using saddles and Commissioning of the whole installation and testing as per instruction of EIC. (At new T/W inside PH-I OHR Site)

Add: @ 18% GST of Sl. No:1.00 to Sl. No: 17.00

Add: @ 1% Cess of Sl. No:1.00 to Sl. No: 18.00

M S ENTERPRISE (BID ID -6754110)

H.K.DAS & CO. (BID ID -6776798)