Providing of New Poles, LED Street Lights and UG Cables in required places ofAmmapet and Kondalampatty Zone in Salem City Municipal Corporation. (Package 2)

Amount

Supply and Delivery of 90W LED Street light: Supply and Delivery of 90W LED Street light fitting system made of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65. Separate compartment for LEDs & electronic driver with CCT of 5700K, PF > 0.9. System efficacy >85. Operating voltage range of 120V to 270V with surge arrestor Minimum of 1KV. Driver current not less than 700mA. THD < 10%. Lumens package not less 100 lm/W for LED Source. Test certificate from NABL (National accredited board for Testing & Calibration laboratory) for LM79 report. In house Testing facility to be available for the same etc.; complete as per Standard Specification. 5 Pin NEMA Socket, 10 kv External Surge Protecting Device.

Supply and Delivery of 3 core 1.5 Sq.mm Cable: Supply and delivery of 3 core 1.5sqmm Flexible cable with ISI mark.

Labour Charges for Fixing of 90W LED Street light: Labours charges for Fixing of New 90W LED Lamp fittings complete set.

Supply and Erection of 7M Height Octagonal street light pole with Single Straight bracket: Supply and Erection of 7 M Height Galvanized Octagonal street light pole free standing single arm bracket 8 sided octagonal continuously tapered structured pole with base plate size 250mm length x 250mm width x 12mm thickness as per IS-875 with following specification. Bottom Pole dia - 140mm, top pole dia - 70mm, Thickness of pole - 3mm and the pole should be hot dip galvanized confirming to BESN ISO - 1461 with thickness of 65 Micron. Supply and fixing of 1 no 16A Double Pole MCB.

Erection of Foundation for 7M Height Octagonal street light pole: Erection of Foundation for 7 M Height Galvanized Octagonal street light pole with M 20 X 700mm long ‘J’ type foundation bolts (EN 8 grade) and necessary nuts & washers and 50mm PVC pipe for cable entry and foundation size of 450mm X 450mm X 300mm including all civil works, all labour charges etc., complete as directed by departmental officers.

Supply and laying of. U.G. cable: Supply and laying of 4 core x 16 sqmm PVC armoured (Aluminium) L.T.U.G. cable in a trench to be excavated at a depth of 0.75 mtr putting 0.15 mtr layer of sand and covering the cable completly with bricks and sand and refilling the earth to make good.

Supply and laying of. U.G. cable: Supply and laying of 3.5 core x 25 sqmm PVC armoured (Aluminium) L.T.U.G. cable in a trench to be excavated at a depth of 0.75 mtr putting 0.15 mtr layer of sand and covering the cable completly with bricks and sand and refilling the earth to make good.

Supply and providing of cable termination: Supply and providing of cable termination of 4 core x 16 sqmm PVC LT UG (Aluminium) armoured cable with necessary aluminium socket by crimping with electrical connection etc. complete.

Supply and providing of cable termination: Supply and providing of cable termination of 3.5 core x 25 sqmm PVC LT UG (Aluminium) armoured cable with necessary aluminium socket by crimping with electrical connection etc. complete.

Supply and fixing of brass Cable glands: Supply and fixing of Brass Cable glands suitable for 4 core x 16 sqmm L.T.U.G. cable. as per standard specification.

Supply and fixing of brass Cable glands: Supply and fixing of Brass Cable glands suitable for 3.5 core x 25 sqmm L.T.U.G. cable. as per standard specification.

Supply and Laying of 50mm HDPE Pipe (10kg/cm2): Supply and Laying of 50mm dia HDPE pipe (10kg/cm2) on ground with necessary clamping arrangements etc. complete. As directed by the departmental officers.IS 4984/1995.

Supply and Fixing of Individual Lamp monitoring (ILM) devices without dimming type for LED lights with plug suitable to fix in LED fittings. Supply and Fixing of Individual Lamp monitoring (ILM) devices without dimming type for LED lights with plug suitable to fix in LED fittings. a) Individual Lamp monitoring (ILM) is an efficient solution for real time monitoring of street lights on an individual basis for error free operation and improved energy savings. b) Once installed the ILM system provides live status of the critical parameters through RF data routing and helps extend the working life of the lamps. c)The ILM device should have the salient features. i ON/OFF sensing ii Power supply of 100Vac to 400Vac iii RF Communication in sub- 865 GHz Band iv ON/OFF/Lamp Fault event notifications with burning hours information v Easy plug and play installation using standard 3/5-pin in ANSI C136.41 NEMA type interface/pole mountable enclosure vi Over the Air firmware upgrade vii Design Life 10 Years viii Enclosure IP65 ix Operating Temperature : -30°C to +70°C x Through SMART Street light web-based software. xi Live Data monitoring xii Reports for Lamp Faults and Lamp burning hours etc.

Supply and Installation of Gateway controller for ILM device : Supply and Installation of Gateway controller for ILM device with the following specifications RF Gateway should collect all the data from ILM devices through RF communication and transmit to central server through GPRS communication. it should have the following features, i. Power supply 90v-330v,50hz ii. Surge protection CAT (6kV/3kA) iii. Battery backed RTC based timer iv. RF Communication Frequency : 865 MHz ISM band v. Hardware: IEEE 802.15.4g PHY vi. Transmit Power: +14 dBm vii. Receiver Sensitivity: -110 dBm viii. Network Fault Tolerance: Self-healing mesh ix. Data Protection: AES-128 encryption x. Communication: GSM/GPRS/4G/NB-IOT/WIFI/ETHERNET xi. Enclosure IP65

Shifting Charge for Old Street Light Contoller : Shifting Charges for Old Street light Controller to new location as per departmental officer instruction

SABHARI ELECTRICALS