Special Repair of Primary Health Centre at Village Hassanga in Fatehabad Distt.

Amount

Earth work in excavation in foundations, trenches etc. in all kinds of soil, not exceeding 2 meters depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry in 15 cm layers with compaction, including disposal of all surplus soil as directed within a lead of 30 Mtrs. (HSR 6.6)

Removing doors and windows (wooden and steel) together with the dismantling of walls (HSR 8.17 (a) doors

Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm thick without concrete base (HSR 8.26)

Scraping of white wash and colour wash (HSR 8.32 (a)

Scraping of cement plaster (HSR 8.32 (c)

Dismantling white or coloured glazed tiles (to be carefully removed) (HSR 8.38)

Cement Concrete 1:8:16 with brick ballast 40mm nominal size in foundation and plinth. (HSR 10.26)

Cement concrete 1:4:8 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.38)

Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in foundation and plinth (HSR 10.41)

Precast chequered tiles of 20 mm thickness in ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. (HSR 14.45)

First class brick work laid in cement sand mortar 1:4 in foundation plinth. (HSR 11.4)

Providing & Fixing PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. (Note:- Reputed make PVC Pipe such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. (HSR 13.89 (a) 100 mm dia PVC pipe 6 kg. pressure. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Providing and fixing PVC Bend ISI Mark. (Note:- Reputed make PVC Bend such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. (HSR 13.90 (a) 100 mm dia PVC Bend. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Providing and fixing 1st quality ceramic glazed wall tiles condirming to I.S 15622 (thickness to by specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. b) size of ceramic glazed tiles 300 x 450 mm NITCO, KAJA-RIA,SOMANI, ORIENT & JOHNSONS shall be used as approved by Engineer-In-Charge. (HSR 14.92 (b) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

12 mm thick cement plaster 1:4 (HSR 15.5)

Cement pointing 1:2 deep variety on brick and tile work (HSR 15.60)

Painting two coats with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint (HSR 16.5)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.25).

Painting two coats with plastic emulsion paint on walls on new work to give an even shade. (HSR 16.30)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR 16.60)

Providing two coats of exterior acrylic emulsion paint (HSR 16.79 (b) Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge

Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy & chapllash etc. (non coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln seasoned) with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/ cleats, stops, nails etc. complete, fixed in position (excluding the cost of any fittings, other than speified above, but including labour for fixing the same in position (HSR 17.90 (a) - 17.18 (i) note 30 mm thick

Factory manufactured wire gauze door and window shutter of commercial hard wood such as hollock, champ, chikrassy and chaplash etc. (non coniferous timber other than teak, conforming to I.S specification no. 1003, kiln sea soned) with 100 mm wide vertical styles 150 mm wide lock rail 200 mm wide bottom rail wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc. complete fixed in position (excluding the cost of any fittings, other than specified above but including labour for fixing the same in position) (i) 30 mm thick HSR 17.92 ii - note I under 17.18)

Providing and fixing Aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z. sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminum sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling C.P brass/stainless steel screws. All complete. Fixed portion (Anodized Aluminum transparent or dyed to required shade according shade according to IS;1868, minimum anodic coating of grade AC 15). (HSR 17.95+Note). Hindalco, Jindal make.

Providing and fixing 12 mm thick preleminated paticle board flat pressed three layer or graded wood particle board conforming to IS;12823 grade I type II in paneling fixed in aluminium doors. Windows shutters and partition frames with c.p brass / stainlees steel screws etc. complete (b) Pre-laminated particle board with decorative lamination on both sides. [HSR 17.97 (b)].

Providing and fixing glazing aluminium door, windows ventilator shutter and partitions etc. with PVC/neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basis items.) [HSR 17.98 (b) with float glass panes of 5.00 mm thickness.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS 6315 marked for door including cost of cutting floors as required embedding in floors and cover plates with brass pivot and single piece M.S sheet outer box. (a) with stainless steel cover plate. [HSR 17.99 (a)].

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12).

Supplying and fixing Glass panes including special metal sash putty of approved make. (b) glass panes 4 mm thic, exceeding 40 sq. dm areas. [HSR 18.30 (b)].

Providing and Fixing parking shed of japani sheet as per approved color with 25 mm thick square MS tube frame of 450 x 450 mm spacing and outer support with 50 mm square tube and vertical post 75 mm dia MS pipe with cement concrete 1:2:4 foundation including cutting, welding, all size screws, nut bolt and placing in position as direction by Engineer-In-Charge (NS)

Public Health Work Providing and fixing in position best indian make (to the approval of the engineer-in-charge). Indian type orissa or orya water closet suite for sinking into floor, with raised foot treads complete with 100 mm g.c.i.’p’ trap with or without vent as required and all other necessary fittings as fully described in item no.30.1 above (HSR 30.2 (a) size 580 mm (i) white

Providing and fixing in position best indian make (to the approval of the engineer-in-charge) european type water closet suit with nonconcealed ‘p’ or ‘s’ trap with or without vent and all other necessary fittings as fully described in item no.30.3 above (HSR 30.4 (i) White

Providing and fixing position best indian make flat back or angular lipped front urinal 465 mm high consisting (HSR 30.19 (i) white

Providing and fixing in position best indian make (ordinary) lavatory suites consisting of :- Lavatory in vitreous chinaware size as given below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary. (HSR 30.41) white (i) R.S or C.I brackets for building into wall including painting 32 mm C.P brass waste with C.P brass chain and rubber plug 15 mm C.P brass screw down pillar tap with jamnuts or couplings best design (as approved by the Engineer-in-charge) All fittings best Indian make and; to the approval of the Engineer-in-charge All brass work chromium plated and complete in all respects including cutting and making good the walls floors and painting of fitting etc. Size 450 mm x 300 mm with one no. tap

Providing and fixing in position best quality Stainless Steel Sinks with Complete fittings as fully described in item No. 30.51. (HSR 30.53 (a) 600 mm x 450 mm x 200 mm.

Providing and fixing in position best indian make towel rails fixed in with rawlslugs embedded in walls with C.P Brass screws, complete in all respect including cutting and making goods the walls etc. (As per item no 30.41) (HSR 30.68) (a) 25mm dia C.P brass adjustable (i) 750 mm long

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making goods the walls etc. (HSR 30.70 (a) C.P. Brass (i) Soap dish Large.

Providing and fixing in position best Indian make bevelled edge 5.5mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embeded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the Engineer -in -charge) complete including cutting and making good the walls etc. (As per item no 30.41) (HSR 30.71) (a) Indian make (I) 600mmx450mm

Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer-In-charge) (HSR 30.75) (a) Bib cock long body

(c) Bib Cock

Providing and fixing in position C. P. brass stop cocks (as approved by the Engineer-In-Charge) (HSR 30.76 (a) 15 mm stop cock (ii) Concealed stop cock with flange

Providing and fixing HDPE water storage tanks of sintex, Diplast, O.K. supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing Iin position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer. (HSR 30.119) 1000 Ltr. Cap.

Recovery Items: - Removing Doors

Shubham Contractor Fatehabad

M/S Om Parkash And Co.

Ram Kishan Contractor