SPECIAL REPAIR OF Q BTY LIVING LINE BLDG NO E 43 AT AD AND OTHER SANCTIONED WORKS UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling brick tiles or terracing tiles laid in single layer on roofs jointed and pointed in cement mortar complete complete all as specified and directed.

Demoletion of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L 10 mm thick screed plaster in cement mortar 1:4 on top of roof complete all as specified and directed.

M&L applying tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning surfaces complete all as specified and directed.

S&F 150 micron polythene film including preparation of roof surfaces complete complete all as specified and directed.

M&L 80 mm thick average consolidated thickness,mud phuska on flat roofs including 25 mm thick mud plaster complete all as specified and directed.

M&L 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed.

M&L except tiles for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed. Note :- Old brick tiles retreived by dismantling of treatment vide item No 1 here-in-before shall be reused.

Taking down chowkhats not exceeding 1.50 sqm each without taking off shutter each upto 04 storeys complete all as specified and directed.

S&F factory made mild steel, box type ventilator with side hung shuttes including projecting type hinges with steel handles and steel peg stay, complete without sash bars, dovtailed or welded complete all as specified and directed.

S&F factory made mild steel, box type windows with side hung shutters (glazed shutters) including projecting type hinges with steel handles and steel peg stay, complete with sash bars, dovetailed or welded to receive wire gauge or glass with one shop coat of zinc chromate primer complete all as specified and directed.

S&F factory made mild steel, box type windows with side hung shutters (wire gauge shutters) including projecting type hinges with steel handles and steel peg stay, complete with sash bars, dovetailed or welded to receive wire gauge or glass with one shop coat of zinc chromate primer complete all as specified and directed.

M&L 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

M&L 3.00 mm thick figured glass, pin head type, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F framed work such as grills,gratings etc, with ends of bars shouldered or riveted or forged into spikes, framed guard bars, barred iron doors framed balausters, walk ways,railings, framework of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and directed.

M&L two coat of synthetic enamel paint (ordinary tint) to the steel surfaces having shop coat primer red oxide (zinc chrome) over 10 cm in width or girth not otherwise described complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc any description complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick/concrete work surfaces mixed with integral water proofing compound as per manufacturer's instruction and complete all as specified and directed. Notes: (i) WPC shall be measured and paid for separately as 'Supply only' item. (ii) WPC to be mixed @200ml per 50 Kg bag of cement or as per manufacturers instructions.

M&L 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfasces complete all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:3 in ceiling on fair faces of brick work or concrete surfaces complete all as specified and directed.

All as per ser item No. 21 here-in-before but rendering 20 mm thick in two layer (10 mm each) on ceiling / Chajja and Facia of roof projections etc.

Supply only liquid water proofing compound.

M&L preparing new surfaces of walls by scrapping/rubbing and applying two coats of cement based paint complete all as specifeid and directed.

M&L preparing old surfaces of walls by scrapping/rubbing and applying two coats of cement based paint complete all as specifeid and directed.

M&L complete removal of existing treatment and applying two coats of oil bound distemper over a coat of water based primer over 1mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper complete all as specifeid and directed.

M&L preparation of new surfaces and applying two coats of oil bound distemper over a coat of primer over 1mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper complete all as specifeid and directed.

M&L preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L preparation of old plastered ceiling surfaces and applying one coat of white wash complete all as specified and directed.

Taking down chowkhats exceeding 1.50 sqm and not exceeding 4.00 sqm without taking off shutter each upto 04 storeys complete all as specified and directed.

Taking down of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed. and directed.

Taking down of shutters of any description not exceeding 1 Sqm complete all as specified and directed.

Refixing the dismantled shutters (serviceable) received from ser item No. 31 & 32 here-in-before in the other openings complete all as specified and directed.

S&F factory made 35 mm thick, 2nd class hard wood ,plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F factory made 35mm thick chowkhats of 2nd class, glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed.

S&F 105mm x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 125mm x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L PCC 1:3:6, type C1 (using 20 mm graded aggregate) as in bed blocks for hold fast, filling of pressed steel chowkhat and all other similar works including necesssary formwork where ever required complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19mm x 19mm MS square tube suitably screwed complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15mm x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm aluminium alloy handle cast type anodised complete all as specified and directed.

M&L preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

M&L preparation of old painted wood surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and directed.

M&L coloured ceramic tiles 7mm to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes like tiles etc complete all as specified and directed.

M&L 10 mm thick rendering on fair faces of brick work in cement mortar 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified and directed.

M&L granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works over cement screed base laid 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L machine cut kota stone slab flooring 18mm - 20mm thick over cement screed base laid 15 mm thick in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and directed.

M&L machine cut Kota stone in risers of steps, skirting and dado 18 mm - 20 mm thick over cement plaster 10 mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and directed.

M&L 18 mm thick granite (of an type and colour) machine cut as in urinal partitions and all other similar works including grinding, polishing, cutting grooves in wall for fixing granite with cement mortar 1:2 and all other arrangments complete all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 300mmx450mm and 7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match complete all as specified and directed.

M&L non-skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular), premium quality area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cement mortar 1:6, complete complete all as specified and directed.

M&L non-skid Ceramic tiles coloured 7 mm to 8 mm thick (square/ rectangular), premium quality on vertical surfaces such as in skirting /dado etc area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar 1:4, complete complete all as specified and directed.

M&L Glazeded ceramic coloured (colour & shade as approved) tile 350mmx250mm/450mmx350mm and 7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar 1:4 and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick plaster as in back coat cement mortar 1:4 complete including moulding at corners and polishing type complete all as specified and directed.

S&F vitreous China squatting pan, 'Orissa patteren, size 580 mm x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) in repair complete all as specified and directed.

S&F vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe including seat cover for pedstal pan in repair complete all as specified and directed.

S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size in repair complete all as specified and directed.

S&F vitreous China wash basin white, flat back,size 560mmx410mmx180mm (Counter / oval type) including CP coupling, waste pipe and cutting for pinning in ends of brackets, complete all as specified and directed.

M&L CP soap dish holder in repair complete all as specified and directed.

S&F 15 mm bore 125 mm size overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange complete all as specified & directed.

S&F 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions in repair complete all as specified and directed.

S&F for vitreous china, bowl urinal flat back, of size 465mm x 355mm x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, securing urinal to plugs with and including, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excluding fixing supply pipe to flushing cistern, trap and waste pipe) in repair complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed

All as per ser item No. 69 here-in-before but 20mm bore.

Fixing only, after cleaning old steel water tubing, 15 mm dia bore and connections in new or old position using new fittings complete all as specified and directed. Note:- Servicable pipes obtained from item 69 shall be reused and the cost of new fittings, if required shall deemed inclusive of quoted rates.

Fixing only, after cleaning old steel water tubing, 15 mm dia bore and connections in new or old position using new fittings complete all as specified and directed. Note:- Servicable pipes obtained from item 70 shall be reused and the cost of new fittings, if required shall deemed inclusive of quoted rates.

S&F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed.

All as per ser item No. 73 here-in-before but 20mm bore.

S&F 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule as in repair complete all as specified and directed.

S&F 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions as in repair complete all as specified and directed.

S&F PVC connection 15mm size PTMT nuts of length 450 mm as in repair complete all as specified and directed.

M&L 75 mm dia PVC(SWR) multi floor trap including jointing with solvent cement as in repair complete all as specified and directed.

M&L chromium plated towel rail 61cm as in repair complete all as specified and directed.

S&F shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F 15 mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts as in repair complete all as specified and directed.

Demoletion and breaking up drain pipes 100 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demoletion and breaking up drain pipes 75 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.

All as per ser item No. 84 here-in-before but laid in trenches or in floors.

All as per ser item No. 84 here-in-before but 110 mm dia fixed to walls etc.

All as per ser item No. 84 here-in-before but 110 mm dia but laid in trenches / under floor etc.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

All as per ser item No. 88 here-in-before but 110 mm dia.

S&F 75 mm dia PVC (SWR) junction single, (single T) equal or uequal provided complete all as specified and directed.

All as per ser item No. 90 here-in-before but 110 mm dia.

S&F 75 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F in replacement old unserviceable PVC rotational water tank by providing new rotational moulded polyethelene water storage tank triple layered ISI marked (Cylindrical verticle with closed top) hoisted and fixed in position of capacity 1000 litre including dismantling & taking out old unserviceable water tank complete all as specified and directed.

S&F 15mm dia gun metal globe or gate valve with iron wheel screwed both end for iron pipe, including dismantling and taking out old unserviceable item complete all as specified and directed.

S&F 20mm dia gun metal globe or gate valve with iron wheel screwed both end for iron pipe, including dismantling and taking out old unserviceable item complete all as specified and directed.

S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe as in repair complete all as specified and directed.

M&L PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete as in sunken floors with WPC @ 20 ml per 50 Kg of cement content complete all as specified and directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 grade @ of 1.2 Kg/Sqm including cleaning of sunken floor surfaces complete all as specified and directed.

M&L rendering 10 mm thick in cement mortar 1:4 on fair faces of brickwork or concrete surfaces, with using liquid water proofing compound @ 200 ml per 50 kg bag of cement or as per manufracture's instructions, complete all as specified and as directed. Note: WPC shall be measured and paid for seperately under relevant item.

M&L 25mm thick cement concrete 1:2:4 type B-0, (using 12.5mm graded stone aggregate) as in top layer of sunken floors and levelling course in floor etc complete all as specified and directed.

S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings.

S&F Powder coated aluminium sections (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exceeding 0.5 sqm in each pane frosted on one side complete all as specified and directed.

M&L 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding. 0.50 sqm in each pane complete all as specified and directed.

Rounding to edges of stones slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

S&F 5mm thick printed coloured PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, Insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site with aluminium corner, top and bottm angles/ mouldings etc. as in repair complete all as specified and directed.

S&F 20 mm dia decorative type curtain rods chromium plated anodised aluminium alloy and all other connected works as in repair complete all as specified and directed.

S&F fancy type powder coated aluminium bracket with gloves for curatin rod suitable for 20 mm dia pipe in repair complete all as specified and directed.

Demolition/dismantling of roofs, projection, down facia, floors (other than ground floors), beams, staircases, landing, chajjas and similar cement concrete is reinforced (reinforcement cut as required to facilitate demolition) suspended work upto double storey building and making good to the dismantled portion with Cement mortar 1:3. Note :- The cost of scaffolding shall be deemed inclusive of quoted rate.

M&L use and waste of formwork to rough finished flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M&L RCC nominal mix 1:2:4 , type B-1 (using 20 mm graded stone aggregate) as in Slabs supported on walls, lintels, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per ser item No 114 here-in-before but using old bricks retrieved from dismantling under ser item no 113 here-in-before including cleaning and removal of mortar from old bricks etc.

M&L for half brick thick work with sub class "B" bricks built in cement mortar 1:4 complete all as specified and directed.

S&F plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L medium density fibre board interior grade 18mm-20 mm thick solid construction type, fixed in repairs in Kitchen cabinets/ CBs doors shutters/ shelves ( horizontal or vertical of any type) on timber frame work with screws /nails complete complete all as specified and directed.

M&L 0.90 mm thick Decorative laminate type -1, both sides of boards surface finish, (colour and pattern as approved) fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F extruded Aluminium alloy anodised handle 125 mm complete all as specified and directed.

Demolition of cement concrete in ground floor not exceeding 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed.

M&L crushed sand filling under precast interlocking paver blocks and all other similar works complete all as specified and directed.

M&L machine presssed precast concrete interlocking paver block (Grey Colour) of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid dry over sand cushion complete all as specified and directed. Note :- Sand cushioning shall be measured and paid for separately under respective item.

M&L machine presssed precast concrete interlocking paver block (Coloured) of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 grade with grey cement and pigment laid dry over sand cushion complete all as specified and directed. Note :- Sand cushioning shall be measured and paid for separately under respective item.

M&L providing cement concrete rounded or chamfered on edges of paver blocks / chequered tiles or sides of path / hardstanding, roof kerbing and mud stops etc. type B-1, 1:3:6 (using 20 mm graded crushed stone aggregate) complete all as specified and as directed.

M&L 75mm thick, PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L mild steel 8mm dia TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete complete all as specified and directed.

M&L formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. rough finished surfaces of concrete flat complete complete all as specified and directed.

Demolition of reinforced cement concrete (reinforce-ment cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and removing debris outside MD land complete complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete complete all as specified and directed.

M&L 10 mm thick rendering cement plaster on ceiling surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and directed.

M&L cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in fillings and mass concrete, filling backs of chowkats etc., complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 300mm long alluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast of extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete complete all as specified and directed.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete complete all as specified and directed.

S&F PTMT door handle, 150 mm long and fixed with steel screws complete complete all as specified and directed. Make: Prayag/Polytuf

S&F 15mm bore bib taps, fancy type chromium plated, screwed for of iron pipe or for brass ferrule and fixed in repair complete all as specified and directed.

S&F 15mm bore stop valves, fancy type, chromium plated with long shank and cup (concealed type), screwed both ends for iron pipe or for union, fixed in repair complete all as specified and directed.

S&F 15mm bore stop valves bore fancy type, chromium plated, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions in repair complete all as specified and directed.

S&F gun-metal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufaturers specification in repair complete all as specified and directed. Make : Prayag Cat No:- 6750 or techno-commercially equivalent in approved makes

S&F wall mixture 3 in 1 with provision of overhead shower complete with 115 mm long bend pipe on upper side, connecting legs and wall flange complete all as per manufacturer's instruction complete all as specified and directed. Make : Prayag Cat No :- 6775 or techno commercially equivalent in approved makes

S&F PVC waste pipe 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks / WHBs complete all as specified and directed.

S&F 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe in repair all as specified in SSR Part-I complete all as specified and directed.

S&F vitreous China squatting pan, Orissa pattern, size 580mmx440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. in repair complete complete all as specified and directed.

S&F vitreous China wash down water closet pan (pedestal pattern), white/ coloured including seat & cover, flush pipe, connection to drain and to flushing pipe, anti-syphonage pipe, etc. in repair complete complete all as specified and directed.

S&F Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories including connecting to existing water pipe and WC etc in repair complete complete all as specified and directed.

M&L wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings of 32mm bore size, waste pipe PVC of 32mm bore, PVC connector 450mm longs with angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete complete all as specified and directed.

S&F Brass chromium plated bottle traps 32mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union , cap and fixing in repair complete all as specified and directed. Make: Prayage or equivalent

S&F PTMT grating doom 100mm dia with or without waste hole fixed in repairs complete all as specified and directed.

M&F corner glass shelves 300 mm radious,8mm thick as per sample radious for bath room, fixed on suitable support of brass chromium plated clips complete all as specified and directed. Make: Prayag Cat No BEA -46 or techno-commercially equivalent in approved makes

S&F 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union in repair complete all as specified and directed.

S&F towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete complete all as specified and directed.

S&F stainless steel soap dish (not less than 1mm thick) of type as directed, fixed to walls with chromium plated brass screws with wooden/rawl plugs, in repair complete all as specified and directed.

S&F toilet paper holder of brass, chromium plated or stainless steel fixed in repair to walls with chromium plated brass screws, complete complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

M&L roof treatment water proofing treatment over RCC slab i.e bituminous primer, bituminous coat polythene film, Mud phushka and brick tile etc laid to slope complete all as specified and directed.

S&F steel work in tabular truss including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 11614-1979 grade St-240 complete all as specified and directed.

S&F pre-painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.

M&L 50 mm thik cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub floors, sub bases, floors and paving etc. complete complete all as specified and directed.

M&L hardcore of broken bricks gauge not exceeding 63mm, deposited, spread & levelled in layers not exceeding 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

Taking down carefully Copper/Aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends, reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks (for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 Amp socket outlet independent controlled by one single pole 5 Amp switch.

All as per ser Item No. 173 here-in-before but one three pin 15 Amp switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

S&F switch piano flush type single pole one way 5/6 Amp complete all as specified and directed.

S&F switch piano flush type 15 Amp, single pole one way complete all as specified and directed.

S&F Socket outlet 2 in one , 5/6 Amp flush type complete all as specified and directed.

S&F Socket outlet, 2 in one 6 pin 5 and 15 Amp piano flush type complete all as specified and directed.

S&F ceiling rose, PVC/Polycarbonate, isolated three terminals complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate, isolated with back plate suitable for batten fittings including 10 Watt LED Bulb complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete complete all as specified and directed.

S&F LED tube light fitting 1 X 18 Watt decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230 Volt, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Cat Part No LHEXBLP7UN1W018 of Havells or techno-commericially equivalent in approved makes

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 Volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 Volt AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete complete all as specified and directed.

S&F MCB, Single pole 240 Volt, 6 Amp - 32 Amp 10 KA 'B Series complete complete all as specified and directed.

S&F MCB, single pole and neutral 240 Volt, 63 Amp 10 KA 'B' series complete complete all as specified and directed.

S&F MCB, single pole and neutral 240 Volt, 32 Amp 10 KA 'B' series complete complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

S&F sheet metal Enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and directed.

S&F sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia in repair complete all as specified and directed. Note: Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length.

M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 Sqmm drawn through in and including PVC concealed with 1 x 6 Sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core and one run of PVC conduit shall be measured as single run.

M&L Earthing complete with galvanized steel plate elecrode of size 60 cm x 60 cm and 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 meter below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate). The chamber shall be constructed one metre away from edge of earth pit 50 mm thick pre cast cover of cement conrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with Aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core complete all as specified and direced.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for taking out and laying underground cable and getting out, excavated earth, forming bottom surfaces to required level complete all as specified and directed.

M&L sand cushioning in trenches for underground cables complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and direced.

M&L bricks (Size 23cm x 11.5cm x 7.5 cm) common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of UG cable complete all as specified and direced.

S&F mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e mild steel clamps nuts & bolts etc as required complete all as specified and directed.

S&F Air termination, single pointed aluminium rod 12mm dia and 300mm long. Note : PCC wooden porcelain blocks with fittings shall be measured and paid for separately.

S&F galvanised iron strip 32mm x 6mm buried directly in ground or fixed to walls complete all as specified and directed.

S&F Aluminium strip 25mm x 3.15 mm complete with saddles and fixing screws etc for roof conductors and down conductor above ground complete all as specified and directed.

S&F Test point terminal block made of gun metal or phosphorous or bronze size 75mmx75mmx25mm drilled and screwed including 3 Nos, 8mm dia 25 mm long hex head screw complete all as specified and directed.

M&L PCC blocks of size 25 cm x 25 cm and 30 cm height in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) providing 02 Nos mild steel fasteners at the top of the block by using 8mm/9mm dia 20 cm long bolts with T junction of 10 cm & embedded in the PCC block, keep 7 cm portion of the bolt above the upper surface of PCC block alongwith 2 Nos washers and nuts etc complete all as specified and directed.

M&L PVC porcelin of locally available hard wood of size 25cmx10cmx5cm for mounted on top of PCC block for erection of air termination alongwith bolts and nuts and to run the roof conductor complete all as specified and directed.

M&L Mild steel galvanised iron pipe light grade (ISI marked) 50mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required complete all as specified and directed.

M&L earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm and 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead using galvanised iron strip 32mm×6mm as earthing lead by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and directed.

B.L. Chaudhri and Co.