CONSTRUCTION OF 4 NO.S OF D TYPE OFFICER QUARTERS AT SALES TAX COLONY, BHAWANIPATNA

Earthwork in excavation in all types of soil for site leveling, Drain and other civil works upto 1.5 metre and stacking the soil including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as per the directed of the Engineer-In-Charge.

Providing and laying plain cement concrete 1:3:6 (1 cement: 3 sand: 6 stone agregate 40mm nominal size) as levelling course in Drain etc. including tempering, curring ,shuttering etc.complete all depth and height as per the direction of Engineer in charge.

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By DTH Rig

(c) Tie Beam

(d) Column

(i) Column (Ground Floor)

(ii) Floor Beam (Ground Floor)

(iii) Lintel & Sill Band (Ground Floor)

(iv) Roof Slab (Ground Floor)

(v) Staircase (Ground Floor)

(vi) Chajja (Average 2.5" thick)

(vii) Fin (3" thick)

(viii) Shelves (2" thick)

(i) Column(First Floor)

(ii) Floor Beam (First Floor)

(iii) Lintel & Sill Band (First Floor)

(iv) Roof Slab (First Floor)

(v) Staircase (First Floor)

(vi) Chajja (Average 2.5" thick)

(vii) Fin (3" thick)

(viii) Shelves (2" thick)

(i) Column(Terrace Floor)

(ii) Floor Beam (Terrace Floor)

(iii) Roof Slab (Terrace Floor)

(b) Ground Floor

(C) First Floor

(d) Terrace Floor

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaFirst Floorolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor

First Floor

Terrace Floor

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaFirst Floorolding required for the work etc. complete in all respect as directed by the Engineer in charge Ground Floor

First Floor

Terrace Floor

Providing 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment Ground Floor

First Floor

Supplying, fitting and fixing Vitrified tiles of premium grade of colour/Printed series 8 mm to 10 mm confirming to IS 13756 of size 600mm X 600MM of approved make in floor on 20 mm thick bed of C.M. (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per specification and direction of the Engineer-in-Charge Ground Floor

First Floor

Supplying, fitting & fixing of granite tile above 0.40 sqm. in floor (20mm thick) laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge Ground Floor

First Floor

Providing, Fitting and Fixing of Vetrifyed tiles of premium grade of colour/ printed serise having 8mm to 10mm confirming to IS 13756 of s (size 600mm x 600mm) of approved make as directed by Engineer-in-charge in dados / skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete as per specification and direction of the Engineer-in-Charge. Ground Floor

First Floor

Supplying fitting & fixing of well dressed & seasoned sal wood choukaths for doors & window including fixing the same in proper position including mending size of grooves in chowkath fixing with necessary WI clamps screws, painting to wall side face of choukath with 2coats of coaltaring finishing smooth including cost of all labour , T & P, cost conveyance , royalty & taxes of all materials requred for the work etc. complete in all respect as per direction of Engineer-in-charge. Ground Floor

First Floor

Providing and fixing 30 mmthick flush door shutter confirming to is.2002(part 1) decorative type ,core block Board construction with frame of 1st class hard wood and well matched teak 3 ply veneeing with vertical grains of cross bands and face venners on both face of shuttersof 4 nos of stainless steel butt hinges (100 mmx60 mmx2.5 mm) 40 mm stainless steel screws .cylindricial lock (God rej 9843) towe boly ss 10x300 mm (bath room) (Godrej3264) pvc door buFirst Floorers with SS screw,teak wood lipping around the edges & paste with 1 mm thick laminate on bothside of the flush door etc including the cost of all material ,hard ware fittings,cost of all labour conveyance,loading,unloading,T&P etc complete as per the direction of Engineer in charge.

Supplying and fitting-fixing of two track upvc sliding window,of approved makewith 6 mm thick glassof approved quality complete with frame,shutters ,and all fittings and fixtures.

Supplying, in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, taxes, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaFirst Floorolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. in Ground Floor Ground Floor

First Floor

Terrace Floor

Painting two coats with plastic emulsion paint to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaFirst Floorolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor

First Floor

Terrace Floor

Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface of wall cost of scaFirst Floorolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor

First Floor

Terrace Floor

Painting two coats to new wood work with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge. Ground Floor

First Floor

Painting two coats New Iron work approved enamel paint of approved colour and shade including sand papering,polishing the surface cost conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor

First Floor

Terrace Floor

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buFirst Flooring, polishing etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.

Fly Ash brick masonry in cement mortar (1:6) in in Foundation & plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% after immersing the brick in water for six hours including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge. FOUNDATION AND PLINTH

Ground Floor

First Floor

Terrace floor

Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% after immersing the brick in water for six hours including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge. Ground Floor

First Floor

Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-charge

Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-In-charge.

Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated sorroundings of pipes and conduits etc. complete as per As per the direction of Engineer in charge.

2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work complte as per the direction of Engineer in charge,

Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)

b) Group-B

c) Group-C

Recessed wiring to 5/6A socket outlet with 2x1mm2 PVC Insulatted S.C F.R.L.S multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch. a) Group-A

b) on existing board

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kGround Floor/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 32mm HDPE pipes (Finolex/Supreme make)

Wiring to Circuit/ Sub-main along with earth wire with following size of FRLS PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard. 1x1.5mm2 Sub-Main Wiring for Invertor onnectiom.

R.C.C. work of M 20 in following works using 12mm to 20 mm (1/2" to 3/4") size (20mm. Not exceed 25%) hard black. Crusher broken granite stone chips of approved qulitiy from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surface smooth with cost conveyance,royalty , taxes of all materials with all labour, labour cess and T & P required for the work. etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and Binding wire of 18 to 20 gauge and labour charges for straightening , cutting beinding, binding and tying the grills and placing in proper position and as per the direction of the Engineer in Charge. (a ) Column Footing

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as JINDAL STEEL/ TATA STEEL/ SAIL / Tiscon (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. (a)Foundation & Plinth

Internal E.I:-Recessed Modular wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 F.R.L.S PVC insulated single core multi strand copper conductor of ISI marked with 50mm dia Non metallic with 20mm dia non metalic PVC flexible conduit with 5/6 250volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FRLS pvc insuleted S/C multistand copper conductor as earth wire Including all accessories and connection.as per direction of ingineer-in-charge. (Make of wire Finolex/Anchore/ Havels/HPL/L&T/ V.Guard & make of switch & socket Legrand/ Hager/ L&T. a)Group-A

d) (1.8.4) 2X6mm2 + 1x2.5mm2

S/F. of 12 Way double door D.Box with 1x 32Amp DP of 'C' series +10x(16-10)A.SP MCB'B' series of Havels make.

S/F of Call bell/ Buzzer and Bell push and flexible cord .

S/F of 25/32A AC starter switch of Havels/HPL /Anchore make.

S/F of 63 Amp. 240V. ICDP main switch of seimens/HPL/Havels/Anchor/LT/C&S make

S/F of 5star rated(BLDC) ISI marked Ceiling fans as per direction of engineer in charge Make:Usha/Havells/CG/Bajaj/eq

S/F of 5 step type electronic fan regulator of L&T/Legrand/equivalent make .

S/F of 90watt LED Street light fittings complete with lamp of Havels/HPL/Bajaj make.

Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc

S/F of 18watt LED Tube light fitting of Phillips/ Bajaj/Havels/HPL make

S/F of computer Board consisting of 3 Nos modular plug and switch all accessories including recessed wiring,Cutting of wall & connection as per requirement.

S/F of 10wt LED Bulb of Havel/HPL/Bajaj make.

S/F of 6 watt LED portico light for Balcony.

S/F Decorative wall light fitting with lamp of Havels make.(model-ARC 1x40watt candle)/equivalent make

S/F of Ultra modern surface mounted Decorative oval Bulk head edge LED Luminaire complete with 10watt LED lamp. (Make Hvells/Endura Rugby model)

S/F of Standard Earthing with G.I. earth pipe of 3mtr.Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pi

pe etc. with charcoal and salt as required.

S/F of 300mm Exhaust Fan of model Usha turbo jet /Bajaj freshee with louvers i.e safe guard .

S/F of 2x10mm2 PVC Al Service wire of Reputed Make.

S/F of extra long No.8 G.I.wire for running of earth .

Provision of Lightening arrestor with 85mm dia 3mm thick Copper base plate and Copper flat 20mm width x 3mm thick including all accessories.

Recessed Modular wiring to power plug point with 2x4mm2 PVC Insulatted S.C F.R.L.S multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with 1x2.5mm2 F.R.L.S PVC insulated S.C C.U. wire for loop earthing as required.(Make of wire finolex/Anchore/Havels /HPL/V.Guard )

a) (1.8.1) 2X1.5mm2 + 1x1.5mm2

S/F of Special Earthing complete with provision of 600x600x3.15mm thick copper plate along with 25x5mm copper strip in 40mm dia GI pipe including soldering of strip if necessary and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.

Excavation of pole pit in all kind of soil including rock of all verity of size 600mm x 600mm and depth 1200 mm with filling of sand to a height of 100mm ,100mm metal concrete and then laying foundation of Reinforced cement concrete (1:2:4) of 450mm x 450mm x 1000mm high with granite metal of nominal size 20mm to 25mm including side shuttering and grouting of foundation bolts and supply and erection of pole as specified above including watering and ramming it a required including provision for passage of cables and finishing the surface with 1:4 ratio cement plaster .

S/F of 90watt LED Street light fittings complete with lamp of Havels/HPL/Bajaj make.

S/F of Weather proof Junction box complete with all accessories including connectors,Bus bar Flats, glands as required with loop in loop out facility make of Sintex/havells/L&T

Supply and laying of 1.5 sqmm 4C round flexible copper cable in flexible pipe or any protective insulated cover .Make: polycab/Finolex/KEI/Havells

S/F 2 x 10 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels)

Cost of Labour charges for Cable Treanching in all type os Soil including excavation of earth,laying of cable upto25mm2 & filling of loose soil upto ground level .

b) (1.8.2) 2X2.5mm2 + 1x1.5mm2

S/F of 32Amp DPswitch.complete with connection as per required.

First Floor

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C - PVC pipe Ground Floor

First Floor

25mm dia C - PVC pipe Ground Floor

32mm dia C - PVC pipe

40mm dia C - PVC pipe

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)

15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)

15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)

25mm dia brass full way valve (Shakti make)

20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)

32mm dia brass full way valve (Shakti make)

40mm dia brass full way valve (Shakti make)

15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)

15mm CP Extension piece

125mm CP grating

15mm size C.P. flange

WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR)

Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 1000 liters capacity PVC water storage tank roof of 1st floor

First Floor

supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. Ground Floor

First Floor

Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge Ground Floor

First Floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. Ground Floor

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Supreme /Ashirvad)

110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)

110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC oFirst Floorset without ear(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)

110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buFirst Floorers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge European water closet with 'p' trap plain(Hindware/Par

ryware/Neycer make)

One piece commod(Hindware)ELEMENT Cat No.92084.

Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge Halfpedestal basin(560x450)Hindware No.91049+91115

Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail

Towel ring

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails.

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mmx450mm size B.E mirror (swivelled type)

Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge

Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder

Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. ½” x 5” CP Shower (Plaza Deluxe Make)

Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size 76cmx76cmx46cm with 18” dia RCC MH cover

Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge

Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge Ground Floor

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

First Floor

First Floor

Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 30cmx30cm Ground Floor

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. Ground Floor

First Floor

Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 45cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 45cmx30cm Ground Floor

Granite Tiles 10mm Thick Ground Floor

Factory made single leaf Solid WPC (Wood polymer) composi

te door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 100mm dia P.V.C. pipe

150mm dia P.V.C. pipe

Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )

Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.

2 nso 30 Users Septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge RCC floor, roof slab chhaja up to 4.430 m height

Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.

Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.

Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.

Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.

Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer dri

lling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only 00 mtr to 30mtr

30 mtr to 45mtr

Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)

45 mtr to 215.00mtr

Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 00 mtr to 30 mtrs

30 mtr to 60mtr

DOL Control panel

40mm dia steel short piece

Well cap

50mm size CI bracket

2.50sqmm flat cable

20mm dia rigid UPVC pipes

Steel rope with cover

Labour charges for lowering including transportation

Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length 200mm dia PVC (sch-80) pipe